# 1140672 Exhaust Hose | Genuine Volvo Penta Part

## 🔧 Product Description

Genuine Volvo Penta rubber exhaust hose in the 152 mm internal diameter, 165 mm external diameter size, with a 950 mm minimum bend radius, quoted at 7.257 kg and listed for the D8, D11 and IPS installations. The exhaust range is built for marine wet exhaust systems to ISO 13363 type 2 for temperatures to 580 degrees C and SAE J 2006 type R2, reinforced with synthetic textile layers and an embedded steel wire helix, with a plain smooth bore for minimum exhaust back pressure and a smooth outer surface. It is catalogued as sold per metre, and the recommended stainless steel clip for this size is 3595350.

## 🚤 Compatibility

Typically suits:

-   Volvo Penta IPS15-C
-   Volvo Penta D11C1-A MP
-   Volvo Penta D11C3-A MP
-   Volvo Penta D11C2-A MP
-   Volvo Penta D8A2-A MP
-   Volvo Penta D11C4-A MP
-   Volvo Penta D8A4-A MP
-   Volvo Penta IPS15-B
-   Volvo Penta D11B4-A MP
-   Volvo Penta D11B2-A MP
-   Volvo Penta D11A-E MP
-   Volvo Penta IPS20-D
-   Volvo Penta IPS2-C
-   Volvo Penta IPS15-A
-   Volvo Penta IPS20-E
-   Volvo Penta D8A8-A MP

-   **Engine Family:** IPS, D
-   **Year Range:** Approximately 2010s - 2020s

## ⚙️ Key Features

-   152 mm internal diameter, 165 mm external diameter
-   950 mm minimum bend radius
-   Conforms to ISO 13363 type 2 to 580 degrees C and SAE J 2006 type R2
-   Synthetic textile reinforcement with an embedded steel wire helix
-   Smooth bore for minimum exhaust back pressure
-   Recommended stainless steel clip 3595350
-   Sold per metre
-   7.257 kg
-   Reinforced by synthetic textile layers and an embedded steel wire helix
-   Plain, smooth inner surface for minimum exhaust back pressure
-   Smooth outer surface
-   Minimised bend radius for easy and quick installation
-   Also listed in the cooling system section as a rubber hose designed to withstand both suction and pressure
-   Also listed in the cooling system section as a rubber hose designed to withstand both suction and pressure
-   Also listed in the cooling system section as a rubber hose designed to withstand both suction and pressure
-   External diameter: 165 mm
-   Internal diameter: 152 mm
-   Min bend radius: 950 mm
-   Supply: per metre
-   Fits: Marine wet exhaust systems

## 🔌 Function

Carries hot exhaust gas and cooling water through a flexible section of the wet exhaust run, absorbing engine movement that a rigid pipe could not take up.

## ⚠️ Common Signs of Failure

-   Soot streaks, exhaust odour or water weeping at the hose ends or along its length
-   Soft, spongy or delaminating walls, or internal collapse restricting flow
-   Surface cracking, hardening or heat blistering of the rubber
-   Bulging sections showing the textile reinforcement has failed
-   Loose or corroded clamped joints leaking under load

## 🛠️ Service Notes

-   Respect the 950 mm minimum bend radius when routing - a tighter bend collapses the bore and raises back pressure
-   Order the size by internal diameter: 1140673 is the 205 mm hose and takes clip 21609813
-   Recommended stainless steel hose clip for this size is 3595350
-   Do not bend it tighter than the 950 mm minimum bend radius

## 🔄 Supersession & Cross Reference

### OEM Supersession Chain

-   1140672 → Supersedes 21233011

### OEM / Related Numbers

-   3889328 earlier number superseded by this part
-   3889326 earlier number superseded by this part
-   3889325 earlier number superseded by this part
-   3889324 earlier number superseded by this part
-   3889327 earlier number superseded by this part
-   3889329 earlier number superseded by this part
-   21233011 earlier number superseded by this part
-   961907 related large-diameter Volvo Penta hose clamp
-   ISO 13363 Type 2 marine wet-exhaust hose specification
-   SAE J2006 R2 marine wet-exhaust hose specification

### Aftermarket / Verified Equivalents

-   Seaflow: 152mm ID reinforced marine wet-exhaust hose
-   Vetus: 152mm marine exhaust hose
-   Trident Marine / Shields: 6-inch reinforced wet-exhaust hose - verify outside diameter and bend radius

## 📦 Condition

-   Genuine Volvo Penta part
-   Brand new
-   Supplied in original or equivalent packaging

## Details

- **Price:** 483.84 AUD
- **Vendor:** Volvo Penta
- **Type:** Hoses & Pipes
- **Tags:** Volvo Penta

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| Default Title | 483.84 AUD | In stock |

## Images

- 1140672 Exhaust Hose | Genuine Volvo Penta Part

---

> Source: [Sawley's Auto and Marine](https://www.sawleysautoandmarine.com.au/products/1140672-exhaust-hose-genuine-volvo-penta)
> Updated: 2026-09-19