# 1543046 Valve Spring Washer | Genuine Volvo Penta Part

## 🔧 Product Description

A genuine Volvo Penta intake-valve spring washer used in the cylinder heads of selected 16-litre diesel engines. The hardened washer forms the spring seat and distributes the valve-spring load over the cylinder-head surface. Twelve washers are used in the applicable six-cylinder, four-valve-per-cylinder cylinder head, corresponding with the two intake valves per cylinder. This listing is for one washer only.

## 🚤 Compatibility

-   **Engine Family:** TWD, TID, TD, TAMD, TAD
-   **Year Range:** Approximately late 1980s through the 2000s

Full model list at the end of this description.

## ⚙️ Key Features

-   OEM Volvo Penta part number 1543046
-   System group: Engine
-   Net weight: 0.034 kg
-   Valve train component fitted within the cylinder head assembly
-   Fits TWD1620/1630, TID162, TD164, TAD1630/1631 and TAMD162/163/165 series diesel engines
-   Typically replaced as a set when the valve springs or cylinder head are serviced
-   Engine type: Volvo Penta 16-litre inline 6-cylinder four-valve diesel
-   12 used per assembly

## 🔌 Function

The valve spring washer sits between the valve spring and its mating surface, providing a flat, hardened seat that keeps the spring correctly located and evenly loaded. This maintains consistent valve spring geometry and prevents the spring from wearing directly into the surrounding components.

## ⚠️ Common Signs of Failure

-   Visible wear grooves, scoring or dishing on the washer face
-   Cracking or breakage of the washer, allowing the valve spring to shift
-   Noisy valve train or irregular tappet noise from the cylinder head
-   Loss of valve spring height or inconsistent spring preload between valves
-   Metal debris or wear particles found in the cylinder head during service

## 🛠️ Service Notes

-   Renew as a set when the valve gear is stripped, and keep the parts for each valve together so nothing is mixed between cylinders
-   Inspect the seating face for cupping, cracking or a wear step before reassembly and renew rather than reuse anything marked
-   Make sure the seat in the head and the face of the washer are clean, with no carbon or swarf trapped underneath
-   Fit the correct way up and the correct way round as shown in the workshop manual for your engine, and check the spring and any seal or shroud sit square before the spring is compressed
-   Once assembled, check by hand that each valve moves freely and seats fully before the engine is turned over

## 🔄 Supersession & Cross Reference

### OEM / Related Numbers

-   1543866 related exhaust valve spring washer
-   1543872 related intake valve spring
-   1543870 related exhaust valve spring
-   1543078 related valve collet
-   1556813 related inlet valve
-   1556896 related exhaust valve

## 📦 Condition

-   Genuine Volvo Penta part
-   Brand new
-   Supplied in original or equivalent packaging

## 🔎 Full Model Compatibility

Typically suits:

-   Volvo Penta TAMD162C-C, TAMD162A, TAMD162B, TAMD162C, TAMD162C-B
-   Volvo Penta TID162AG, TID162AGP, TID162AP, TID162APB
-   Volvo Penta TAD1630G, TAD1630GE, TAD1630P
-   Volvo Penta TWD1630G, TWD1630P, TWD1630V
-   Volvo Penta TAD1631GE, TAD1631G
-   Volvo Penta TAMD163A-A, TAMD163P-A
-   Volvo Penta TAMD165A, TAMD165C
-   Volvo Penta TD164KAE
-   Volvo Penta TWD1620G

## Details

- **Price:** 24.68 AUD
- **Vendor:** Volvo Penta
- **Type:** Fasteners & Fixings
- **Tags:** Volvo Penta Parts | Genuine Marine Engine & Service Components

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| Default Title | 24.68 AUD | In stock |

## Images

- 1543046 Valve Spring Washer | Genuine Volvo Penta Part

---

> Source: [Sawley's Auto and Marine](https://www.sawleysautoandmarine.com.au/products/1543046-valve-spring-washer-genuine-volvo-penta)
> Updated: 2026-10-09