# 1544734 Hose Clamp | Genuine Volvo Penta Part

## 🔧 Product Description

Genuine Volvo Penta hose clamp sized for a clamping diameter range of 123-129mm, supplied within the fastening, spacing, locking and support hardware group. It secures large-bore hoses such as coolant, charge air and exhaust connections to their spigots to maintain a sealed joint under pressure and vibration. The 123-129mm diameter band is what sets this clamp apart from otherwise identically named clamps, so match the size to your hose and spigot before ordering.

## 🚤 Compatibility

-   **Engine Family:** TAD, TD, D, TWD, TID

Full model list at the end of this description.

## ⚙️ Key Features

-   Genuine Volvo Penta OEM part number 1544734
-   Clamping diameter range: D=123-129mm
-   System group: Parts for Fastening, Spacing, Locking and Support, Stock Shape Materials
-   Net weight approximately 0.095 kg
-   Fits TD, TID, TWD, TAD, D11 and D16 series industrial, genset and marine diesel engines
-   Engine type: Volvo Penta 10- and 12-litre diesel

## 🔌 Function

A hose clamp compresses a flexible hose evenly around its mating spigot to create and hold a leak-free joint. It maintains that clamping load against internal pressure, thermal cycling and engine vibration.

## ⚠️ Common Signs of Failure

-   Coolant, oil or air leaking at the hose-to-spigot joint
-   Visible corrosion, pitting or cracking of the clamp band
-   Stripped, seized or sheared tightening screw that will not hold torque
-   Loss of clamping tension allowing the hose to creep or blow off
-   Hose damage or cutting caused by a distorted or over-tightened band

## 🛠️ Service Notes

-   Match the clamp to the hose outside diameter so the band closes well within its working range rather than at the very end of its travel
-   Position it over the spigot behind the bead or barb, with the screw where a driver or spanner can still reach it once everything is refitted
-   Tighten to seal, not to crush — an over-tightened worm-drive clamp cuts into soft hose and starts the leak you were trying to stop
-   Renew clamps when a hose is changed rather than reusing them, and keep band, housing and screw all marine-grade stainless so the clamp does not corrode against itself
-   Where two clamps are fitted to one connection, stagger the screw heads and recheck both after the first running period

## 🔄 Supersession & Cross Reference

### OEM / Related Numbers

-   1544732 - companion clamp
-   1544733 - companion clamp
-   1544735 - companion clamp
-   3825778 - related air filter
-   3825971 - related connection pipe

## 📦 Condition

-   Genuine Volvo Penta part
-   Brand new
-   Supplied in original or equivalent packaging

## 🔎 Full Model Compatibility

Typically suits:

-   Volvo Penta TD61A, TD61ACE, TD61AG, TD61AGP, TD61AP, TD61APB, TD61AW
-   Volvo Penta TD71A, TD71ACE, TD71AG, TD71AGP, TD71AP, TD71APB, TD71AW
-   Volvo Penta D11A-A, D11A-B, D11A-C, D11A-E, D11A-D MP
-   Volvo Penta D16C-A MG, D16C-A MH, D16C-B MH, D16C-C MH, D16C-D MH
-   Volvo Penta TAD1030P, TAD1030G, TAD1030GE, TAD1030V, TAD1030VE
-   Volvo Penta TID71A, TID71AG, TID71AGP, TID71AP, TID71APB
-   Volvo Penta TID162AG, TID162AGP, TID162AP, TID162APB
-   Volvo Penta TWD1210G, TWD1210P, TWD1210PB, TWD1210V
-   Volvo Penta TWD610G, TWD610P, TWD610PB, TWD610V
-   Volvo Penta TWD710G, TWD710P, TWD710PB, TWD710V
-   Volvo Penta TAD1630G, TAD1630GE, TAD1630P
-   Volvo Penta TAD730G, TAD730P, TAD730V
-   Volvo Penta TD121G-87, TD121GP, TD121GPB
-   Volvo Penta TD610G, TD610M, TD610V
-   Volvo Penta TWD1211V, TWD1211P, TWD1211G
-   Volvo Penta TWD1630G, TWD1630P, TWD1630V
-   Volvo Penta TAD1230G, TAD1230V
-   Volvo Penta TAD1631GE, TAD1631G
-   Volvo Penta TD630ME, TD630VE
-   Volvo Penta TD730ME, TD730VE
-   Volvo Penta TID61AG, TID61AGP
-   Volvo Penta TWD1230ME, TWD1230VE
-   Volvo Penta TWD630ME, TWD630VE
-   Volvo Penta TAD1231GE
-   Volvo Penta TAD1232GE
-   Volvo Penta TD100G
-   Volvo Penta TD1010G
-   Volvo Penta TD1030VE
-   Volvo Penta TD1210G
-   Volvo Penta TD640VE
-   Volvo Penta TD710G
-   Volvo Penta TWD1010G
-   Volvo Penta TWD1030ME
-   Volvo Penta TWD1031VE
-   Volvo Penta TWD1231VE
-   Volvo Penta TWD1620G
-   Volvo Penta TWD730ME
-   Volvo Penta TWD731VE

## Details

- **Price:** 11.36 AUD
- **Vendor:** Volvo Penta
- **Type:** Fasteners & Fixings
- **Tags:** Volvo Penta Parts | Genuine Marine Engine & Service Components

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| Default Title | 11.36 AUD | In stock |

## Images

- 1544734 Hose Clamp | Genuine Volvo Penta Part

---

> Source: [Sawley's Auto and Marine](https://www.sawleysautoandmarine.com.au/products/1544734-hose-clamp-genuine-volvo-penta)
> Updated: 2026-10-09