# 1560272 Spacer Washer | Genuine Volvo Penta Part

## 🔧 Product Description

This genuine Volvo Penta spacer washer is a replaceable locating, spacing or bearing-support component used in the belt-protector and bracket installation. It is manufactured to the original Volvo Penta dimensions and interface requirements so the supported component retains the specified clearance, spacing and location. Spacer washer dimensions: approximately 18 mm OD × 8.4 mm ID × 13 mm long. In service, it sets the required spacing and load distribution beneath the matched belt-protector fastener. Fitment is controlled by the exact engine or product configuration and serialised parts list; confirm OEM number 1560272 against the installed assembly before ordering.

## 🚤 Compatibility

-   **Engine Family:** TAMD, TWD, TD, TAD

Full model list at the end of this description.

## ⚙️ Key Features

-   OEM Volvo Penta part number 1560272
-   Dimension: 18x8,4x13mm (outer diameter x bore x length)
-   System group: Inlet and Exhaust System
-   Net weight approximately 0.016 kg
-   Fits TAMD, TAD, TWD and TD series marine and industrial diesel engines
-   Quantity varies by assembly, most commonly two

## 🔌 Function

The spacer washer establishes a fixed distance between two mating surfaces or between a fastener and a component, preventing over-compression and holding assembly alignment. It also spreads fastener load across the joint face.

## ⚠️ Common Signs of Failure

-   Visible crushing, deformation or flattening of the spacer
-   Loose or repeatedly loosening fasteners at the joint
-   Misalignment or uneven seating of the mounted component
-   Corrosion, pitting or seizure onto the bolt or stud
-   Exhaust or intake leakage traced to incorrect joint spacing

## 🛠️ Service Notes

-   A spacer washer sets a dimension as well as carrying load — keep or measure the original and refit the same thickness unless the workshop manual for your engine tells you to select a different one
-   Refit spacers in the same order and the same positions they came from, and keep them with their own assembly while it is apart
-   Check both faces for wear, dishing, burrs and fretting marks, and fit a new washer if the faces are no longer flat and parallel
-   Make sure the seating faces are clean before assembly; grit or old sealant under a spacer changes the very clearance it is there to set
-   Where the spacer sets an endfloat or a clearance, measure that clearance after assembly against the manual figure rather than assuming it

## 📦 Condition

-   Genuine Volvo Penta part
-   Brand new
-   Supplied in original or equivalent packaging

## 🔎 Full Model Compatibility

Typically suits:

-   Volvo Penta TAMD74P-A, TAMD74P-B, TAMD74A, TAMD74C-A, TAMD74C-B, TAMD74L-A, TAMD74L-B
-   Volvo Penta TAMD63L-A, TAMD63P-A
-   Volvo Penta TAMD72P-A, TAMD72WJ-A
-   Volvo Penta TAMD73P-A, TAMD73WJ-A
-   Volvo Penta TWD740GE, TWD740VE
-   Volvo Penta TAD730G
-   Volvo Penta TAD740GE
-   Volvo Penta TAD741GE
-   Volvo Penta TAMD71B
-   Volvo Penta TAMD75P-A
-   Volvo Penta TD610G
-   Volvo Penta TD710G
-   Volvo Penta TWD610G
-   Volvo Penta TWD710G

## Details

- **Price:** 14.17 AUD
- **Vendor:** Volvo Penta
- **Type:** Fasteners & Fixings
- **Tags:** Volvo Penta Parts | Genuine Marine Engine & Service Components

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| Default Title | 14.17 AUD | In stock |

## Images

- 1560272 Spacer Washer | Genuine Volvo Penta Part

---

> Source: [Sawley's Auto and Marine](https://www.sawleysautoandmarine.com.au/products/1560272-spacer-washer-genuine-volvo-penta)
> Updated: 2026-10-10