# 1618T Dunbier Axle 64 x 2.2t Square Hydraulic Brake 2275mm (89.5") | Marine Trailer Part

🔧 Product Description

  

Dunbier Trojan Heavy-Duty 2.2-Tonne Hydraulic Disc Axle - Part Number: 1618T

  

A legacy-listed 64mm / current-catalogue 65mm square straight boat-trailer axle configured for hydraulic disc brakes braking and an overall length of approximately legacy 2275mm / 89.5"; current catalogue 2200mm / 86.5". The assembly combines the axle beam, bearing journals and the appropriate disc/hub and brake hardware for the specified system.

  

⚙️ Key Features

  

• legacy-listed 64mm / current-catalogue 65mm square axle construction

• Straight axle geometry

• Overall axle length approximately legacy 2275mm / 89.5"; current catalogue 2200mm / 86.5"

• Configured for hydraulic disc brakes

• Designed for galvanised marine-trailer suspension and hub systems

• heavy-duty Trojan hub/disc pattern; verify six-stud configuration and PCD

• Complete brake configuration should be matched to the trailer coupling and actuation system

• Heavy-duty axle family for higher-capacity trailer applications

  

📏 Specifications

  

• Beam section: legacy-listed 64mm / current-catalogue 65mm square

• Overall length: Approximately legacy 2275mm / 89.5"; current catalogue 2200mm / 86.5"

• Brake or hub configuration: hydraulic disc brakes

• Wheel/hub pattern: heavy-duty Trojan hub/disc pattern; verify six-stud configuration and PCD

• Trojan 2.2-tonne bearing family commonly uses LM44649/LM44610 and LM48548/LM48510

• Rear seal commonly catalogued in the Dunbier heavy-axle 1711 family

• Confirm the actual bearing and seal numbers removed from the hub before ordering service parts

• Legacy/supplied listing dimension: 64mm square × 2275mm / 89.5in

• Current Dunbier 2023/24 catalogue describes the Trojan heavy axle as 65mm square × 2200mm / 86.5in

• Measure the existing axle and confirm the current supplied assembly before purchase

  

🔄 Cross Reference & Related Parts

  

• Dunbier: 1618T

• Beam-only heavy axle: Dunbier 1632

• Stainless caliper and disc version: Dunbier 1618TS

• Heavy-axle bearing and seal parts must be identified from the installed Trojan hub

• Hub, bearing, seal, brake and spring components must be selected by axle journal and installed configuration

• Comparable axles from AL-KO, Mackay, Trojan or other manufacturers are not direct replacements unless beam length, spring centres, journal size, brake offset and wheel track all match

  

🚤 Trailer Compatibility & Application

  

• Suitable for compatible Dunbier marine trailers using the stated beam size, overall length and spring-centre geometry

• Measure the existing axle from hub face or axle end using the same method as the replacement catalogue before ordering

• Confirm wheel offset, tyre clearance, mudguard clearance and boat-hull clearance

• Axle capacity is determined by the complete axle, bearings, hubs, springs, tyres, brakes and trailer certification—not beam size alone

  

🔌 Function

  

Supports the trailer load between the suspension and wheel hubs while maintaining wheel track, bearing alignment and brake mounting geometry. The hydraulic disc system converts brake-fluid pressure into caliper clamping force.

  

Common signs of wear or replacement:

  

• Axle beam is bent, twisted or visibly cracked

• Tyres wear unevenly because wheel alignment or camber has changed

• Bearing journals are scored, undersize, corroded or heat-discoloured

• Spring seats, brake flanges or welds are cracked

• Persistent bearing looseness remains after correct adjustment

• Brake discs are below minimum thickness or heavily corroded

• Calipers seize, leak or apply unevenly

  

🛠️ Installation & Safety

  

• Axle replacement and brake setup should be completed by a competent trailer technician

• Support the trailer on rated stands before removing suspension or hub components

• Align spring centres and axle orientation before tightening U-bolts

• Fit new bearing seals, correctly pack bearings and set bearing end float

• Verify wheel-nut torque, brake operation and tyre clearance before road use

• Bleed hydraulic systems or adjust mechanical cables as required

• Road-test progressively and recheck wheel-bearing adjustment and wheel-nut torque

  

📦 Condition

  

• Brand new Dunbier Marine Products trailer component

• Supplied as one Trojan heavy-duty hydraulic brake axle assembly

• Supplied in original or equivalent packaging

## Details

- **Price:** 2659.05 AUD
- **Vendor:** Dunbier
- **Tags:** Dunbier Boat Trailers | Marine Trailer Parts & Accessories

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| Default Title | 2659.05 AUD | In stock |

## Images

- 1618T Dunbier Axle 64 x 2.2t Square Hydraulic Brake 2275mm (89.5") | Marine Trailer Part

---

> Source: [Sawley's Auto and Marine](https://www.sawleysautoandmarine.com.au/products/1618t-dunbier-axle-64-x-2-2t-square-hydraulic-brake-2275mm-89-5)
> Updated: 2026-08-03