# 17246188 Hose | Genuine Volvo Penta Part

## 🔧 Product Description

Genuine Volvo Penta hose from the lubricating and oil system, carrying oil between components in the lubrication circuit. It is listed for TAD-series industrial diesel engines. Oil hoses are pressure-carrying items and should be inspected for perishing and chafing at service.

## 🚤 Compatibility

Typically suits:

-   Volvo Penta TAD1170-72VE
-   Volvo Penta TAD1150-52VE
-   Volvo Penta TAD1140-42VE

-   **Engine Family:** TAD

## ⚙️ Key Features

-   Factory-formed air-intake or charge-air hose
-   Confirmed for TAD1140-42VE inlet and exhaust systems
-   Designed for boosted-air pressure, temperature and oil mist
-   Maintains the original airflow path and connection geometry
-   Requires the correct clamps and sealing surfaces
-   Engine type: Volvo Penta 11-litre turbocharged industrial diesel

## 🔌 Function

The hose carries pressurised oil between two points in the lubrication circuit, flexing to accommodate engine movement without transmitting load to the connections.

## ⚠️ Common Signs of Failure

-   Oil weeping, seeping or spraying from the hose or end fittings
-   Cracking, perishing, blistering or hardening of the outer cover
-   Chafing or abrasion where the hose contacts other components
-   Bulging or swelling under pressure
-   Loss of oil pressure traced to a leaking or collapsed hose

## 🛠️ Service Notes

-   Fit hoses only to clean, sound spigots — take off old rubber, scale and corrosion, and renew the spigot or pipe if it is pitted, because no clamp will seal a rough sealing face
-   Push the hose fully home so the clamp sits behind the bead or barb rather than over the end of the spigot, and fit new clamps whenever a hose is renewed
-   Let the hose follow its natural bend with no kinks and no tension on either connection, clear of hot surfaces and moving parts, with chafe protection wherever it passes a bracket, edge or bulkhead
-   Use the correct grade of hose for the duty, and clamp to the standard the installation demands — twin clamps are normal practice on seawater and fuel connections below the waterline
-   Refill, vent and run the engine, then check every joint hot and cold and recheck the clamps after the first running period as the hose beds down

## 📦 Condition

-   Genuine Volvo Penta part
-   Brand new
-   Supplied in original or equivalent packaging

## Details

- **Price:** 495.51 AUD
- **Vendor:** Volvo Penta
- **Type:** Hoses & Pipes
- **Tags:** Volvo Penta

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| Default Title | 495.51 AUD | In stock |

## Images

- 17246188 Hose | Genuine Volvo Penta Part

---

> Source: [Sawley's Auto and Marine](https://www.sawleysautoandmarine.com.au/products/17246188-hose-genuine-volvo-penta)
> Updated: 2026-09-06