# 17468786 O-Ring | Genuine Volvo Penta Part

## 🔧 Product Description

This genuine Volvo Penta o-ring is a machined lubrication-system filter and distribution housing used in the oil-filter housing sealing joint. It is manufactured to the original Volvo dimensional, material and interface requirements so the serviced assembly retains its designed alignment, sealing, load capacity and operating reliability. In service, it seals the plug/bypass-valve area of the alternative-mounting oil-filter housing. Selection must be confirmed by OEM part number 17468786, the exact engine/product model, serial number and installed configuration.

## 🚤 Compatibility

-   **Engine Family:** D, TAD, TWD

Full model list at the end of this description.

## ⚙️ Key Features

-   Genuine Volvo Penta OEM o-ring
-   OEM part number 17468786
-   Clean all oil galleries and sealing faces, renew filters, plugs, O-rings and bypass components as required, prime the lubrication system and verify hot oil pressure and leakage after installation.

## 🔌 Function

Seals the plug/bypass-valve area of the alternative-mounting oil-filter housing. Clean all oil galleries and sealing faces, renew filters, plugs, O-rings and bypass components as required, prime the lubrication system and verify hot oil pressure and leakage after installation.

## ⚠️ Common Signs of Failure

-   Fluid weeping, seeping or dripping at the joint
-   Hardening, cracking or loss of elasticity on removal
-   Flattening or permanent set so the ring no longer springs back
-   Swelling or chemical attack from the fluid it seals
-   Nicks, cuts or twisting from incorrect installation

## 🛠️ Service Notes

-   Always fit a new O-ring — never refit one that has been removed, as it has already taken a set in its groove
-   Clean the groove and both sealing faces and check them for nicks, scoring and corrosion pitting; a damaged groove will leak however good the new seal is
-   Smear the ring with a little clean lubricant compatible with the fluid it seals, then roll it into place by hand so it sits untwisted and fully in its groove
-   Never lever an O-ring over a sharp edge or thread with a screwdriver; use a blunt plastic tool and protect any edge the ring has to pass
-   Assemble the joint squarely and tighten to the figure and sequence given in the workshop manual for your engine — over-tightening extrudes the ring and causes the very leak you were curing

## 🔄 Supersession & Cross Reference

### OEM / Related Numbers

-   17427991 oil filter housing
-   471085 valve cone
-   466653 compression spring
-   17425684 plug

## 📦 Condition

-   Genuine Volvo Penta part
-   Brand new
-   Supplied in original or equivalent packaging

## 🔎 Full Model Compatibility

Typically suits:

-   Volvo Penta D11C1-A MP, D11C3-A MP, D11C2-A MP, D11C4-A MP
-   Volvo Penta TAD1640-42GE-B, TAD1640GE, TAD1640VE-B, TAD1640-42VE-C
-   Volvo Penta D16C1-E MH, D16C1-F MH
-   Volvo Penta TAD1642VE-B, TAD1642GE
-   Volvo Penta TAD1643VE-B, TAD1643VE
-   Volvo Penta TAD1650VE-B/51VE, TAD1650GE
-   Volvo Penta TAD1140-42VE
-   Volvo Penta TAD1150-52VE
-   Volvo Penta TAD1170-72VE
-   Volvo Penta TAD1180-83VE
-   Volvo Penta TAD1380-82GE
-   Volvo Penta TAD1381-85VE
-   Volvo Penta TAD1641GE
-   Volvo Penta TAD1651GE
-   Volvo Penta TAD1660-62VE
-   Volvo Penta TAD1662VE EU5
-   Volvo Penta TAD1670-72VE
-   Volvo Penta TWD1644-45GE
-   Volvo Penta TWD1672-1673GE
-   Volvo Penta TWD1682-83GE
-   Volvo Penta TWD1683VE

## Details

- **Price:** 30.59 AUD
- **Vendor:** Volvo Penta
- **Type:** Gaskets & Seals
- **Tags:** Volvo Penta

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| Default Title | 30.59 AUD | In stock |

## Images

- 17468786 O-Ring | Genuine Volvo Penta Part

---

> Source: [Sawley's Auto and Marine](https://www.sawleysautoandmarine.com.au/products/17468786-o-ring-genuine-volvo-penta)
> Updated: 2026-09-19