# 18387 Clamp | Genuine Volvo Penta Part

## 🔧 Product Description

This genuine Volvo Penta clamp is an OEM hose, pipe or cable retention component used in the legacy cooling, lubrication and fuel-system hose/pipe clamping positions. It is manufactured to the original Volvo dimensional, material and interface requirements so the serviced assembly retains its designed alignment, sealing, load capacity and operating reliability. In service, it retains the matched hose or pipe against vibration, chafing and pressure-induced movement. Selection must be confirmed by OEM part number 18387, the exact engine/product model, serial number and installed configuration.

## 🚤 Compatibility

-   **Engine Family:** TAD, D, TD, AQ, TAMD, TWD, TMD, BB, TID, B, MD, MB, AQD
-   **Serial Range:** SN-2071074712

Full model list at the end of this description.

## ⚙️ Key Features

-   Genuine Volvo Penta OEM clamp
-   OEM part number 18387
-   Position the clamp at the original support point without crushing the hose or pipe, renew damaged cushioning or hardware, and verify clearance throughout engine movement and vibration.
-   Quantity varies by assembly, most commonly one

## 🔌 Function

Retains the matched hose or pipe against vibration, chafing and pressure-induced movement. Position the clamp at the original support point without crushing the hose or pipe, renew damaged cushioning or hardware, and verify clearance throughout engine movement and vibration.

## ⚠️ Common Signs of Failure

-   Corrosion or rust weakening the clamp band
-   Seepage or leakage at the clamped joint
-   Clamp failing to hold tension when tightened
-   Hose or pipe able to move at the connection
-   Distortion or cracking of the clamp on removal

## 🛠️ Service Notes

-   Fit a new clamp rather than reusing one that has been distorted, stretched or corroded; a band that has been drawn down onto a hose once rarely grips evenly again
-   Use the correct size and type for the joint — an over-large clamp will not draw down evenly and can cut into a soft hose instead of gripping it
-   Position the clamp fully over the spigot or pipe bead, clear of the hose end, and tighten only until the joint is secure; over-tightening crushes hoses, pipes and cable insulation
-   Set the screw or head where you can reach it for later checks, and make sure the clamp is not resting anywhere it will chafe a neighbouring hose or harness
-   Re-check tightness after the first run up to temperature, as hoses relax and settle once they have been heated

## 🔄 Supersession & Cross Reference

### OEM Supersession Chain

-   18387 → Supersedes 240325

### OEM / Related Numbers

-   240325 earlier number superseded by this part
-   1664500 radiator
-   1544427 radiator hose
-   466167 oil return pipe

## 📦 Condition

-   Genuine Volvo Penta part
-   Brand new
-   Supplied in original or equivalent packaging

## 🔎 Full Model Compatibility

Typically suits:

-   Volvo Penta TD100G-85, TD100A, TD100G, TD100GG, TD100GGP, TD100HP, TD100HPB, TD100GG-85, TD100GP, TD100GP-85
-   Volvo Penta TID100KG, TID100KGP, TID100K, TID100K-87, TID100KGP-87, TID100KP, TID100KP-87, TID100KPB-87
-   Volvo Penta D12D-A MG, D12D-A MH, D12D-B MH, D12D-C MH, D12D-E MG, D12D-E MH, D12D-G MH
-   Volvo Penta TD70CHC, TD70CRC, TD70G, TD70B, TD70G-83
-   Volvo Penta AQ130C, AQ130D, AQ130A, AQ130B
-   Volvo Penta TD120A, TD120GG, TD120ARC, TD120BRC
-   Volvo Penta AQ170B, AQ170C, AQ170A
-   Volvo Penta BB115A, BB115B, BB115C
-   Volvo Penta BB170B, BB170C, BB170A
-   Volvo Penta D70CHC, D70CRC, D70B
-   Volvo Penta MB20A, MB20B, MB20C
-   Volvo Penta TWD710G, TWD710P, TWD710PB
-   Volvo Penta AQ115A, AQ115B
-   Volvo Penta D100A, D100B
-   Volvo Penta 100S, 110S
-   Volvo Penta TAD1030V, TAD1030VE
-   Volvo Penta TAD730G, TAD730P
-   Volvo Penta TAMD71B, TAMD71A
-   Volvo Penta TAMD72A, TAMD72WJ-A
-   Volvo Penta TAMD73P-A, TAMD73WJ-A
-   Volvo Penta TD121G-87, TD121CRC
-   Volvo Penta TID60DG, TID60D
-   Volvo Penta AQ165A
-   Volvo Penta AQD21A
-   Volvo Penta B20
-   Volvo Penta BB165A
-   Volvo Penta D120A
-   Volvo Penta MD21A
-   Volvo Penta TAD1346GE
-   Volvo Penta TAMD61A
-   Volvo Penta TAMD62A
-   Volvo Penta TD1010G
-   Volvo Penta TD1030VE
-   Volvo Penta TD60D-83
-   Volvo Penta TD610G
-   Volvo Penta TD710G
-   Volvo Penta TID70G
-   Volvo Penta TMD122A
-   Volvo Penta TWD1010G
-   Volvo Penta TWD1030ME
-   Volvo Penta TWD1031VE
-   Volvo Penta TWD1230ME
-   Volvo Penta TWD1231VE
-   Volvo Penta TWD610G

## Details

- **Price:** 4.42 AUD
- **Vendor:** Volvo Penta
- **Type:** Fasteners & Fixings
- **Tags:** Volvo Penta

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| Default Title | 4.42 AUD | In stock |

## Images

- 18387 Clamp | Genuine Volvo Penta Part
- 18387 Clamp | Genuine Volvo Penta Part - photo 2 of 2

---

> Source: [Sawley's Auto and Marine](https://www.sawleysautoandmarine.com.au/products/18387-clamp-genuine-volvo-penta)
> Updated: 2026-09-21