# 192031 Gasket | Genuine Volvo Penta Part

## 🔧 Product Description

This genuine Volvo Penta gasket is a precision-cut sealing component designed for the specified engine or propulsion-system joint used in the legacy engine fluid fitting or housing joint. It is manufactured to the original Volvo Penta dimensional, material and interface requirements so the serviced assembly retains its designed alignment, sealing, load capacity and operating reliability. In service, it seals the identified housing or fitting joint against fluid leakage. Selection must be confirmed by OEM part number 192031, the exact engine or product model, serial number and installed configuration.

## 🚤 Compatibility

-   **Engine Family:** MD, MB, AQ, BB, B, AQD

Full model list at the end of this description.

## ⚙️ Key Features

-   Gasket sealing a legacy engine fluid fitting or housing joint
-   0.002 kg
-   Listed for 42 applications across MD, MB, AQ, BB, B and AQD series engines
-   Ordered by part number 192031 against the exact model and serial number

## 🔌 Function

Seals the identified housing or fitting joint against fluid leakage. Remove all old gasket material without damaging the mating faces, check flatness and corrosion, and tighten the assembly in the specified sequence.

## ⚠️ Common Signs of Failure

-   Fluid weeping or dripping from the fitting
-   Wet film or staining spreading below the joint
-   Fitting needing repeated retightening to hold a seal
-   Gasket found flattened, split or bonded to a face on removal
-   Scoring or corrosion on the seating face

## 🛠️ Service Notes

-   Fit a new gasket every time the joint is disturbed — a gasket takes a permanent set once it has been torqued and will not seal reliably a second time
-   Scrape both faces back to clean bare metal, keeping the blade at a shallow angle so it lifts the old material without gouging the surface, and use a plastic scraper on aluminium castings
-   Check the faces for flatness, cracks and corrosion pitting, and make sure no old gasket, carbon or hardened sealant is left in the corners or around the bolt holes
-   Fit the gasket dry unless the workshop manual for your engine calls for a sealant, and then only the type it specifies — surplus sealant squeezes out into oil, coolant and fuel passages
-   Draw the fasteners down progressively in the sequence and to the torque given in the manual for your engine, and recheck after the first heat cycle where the manual asks for it

## 📦 Condition

-   Genuine Volvo Penta part
-   Brand new
-   Supplied in original or equivalent packaging

## 🔎 Full Model Compatibility

Typically suits:

-   Volvo Penta AQ130C, AQ130D, AQ130A, AQ130B
-   Volvo Penta AQ170B, AQ170C, AQ170A
-   Volvo Penta BB115A, BB115B, BB115C
-   Volvo Penta BB170B, BB170C, BB170A
-   Volvo Penta MB20A, MB20B, MB20C
-   Volvo Penta MD5A, MD5B, MD5C
-   Volvo Penta AQ115A, AQ115B
-   Volvo Penta MD11C, MD11D
-   Volvo Penta MD17C, MD17D
-   Volvo Penta MD6A, MD6B
-   Volvo Penta MD7B, MD7A
-   Volvo Penta 100S, 110S
-   Volvo Penta AQ165A
-   Volvo Penta AQD2B
-   Volvo Penta AQD21A
-   Volvo Penta B20
-   Volvo Penta BB165A
-   Volvo Penta MB10A
-   Volvo Penta MD1B
-   Volvo Penta MD2B
-   Volvo Penta MD21A
-   Volvo Penta MD3B
-   Volvo Penta MD67C

## Details

- **Price:** 12.46 AUD
- **Vendor:** Volvo Penta
- **Type:** Gaskets & Seals
- **Tags:** Volvo Penta

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| Default Title | 12.46 AUD | In stock |

## Images

- 192031 Gasket | Genuine Volvo Penta Part

---

> Source: [Sawley's Auto and Marine](https://www.sawleysautoandmarine.com.au/products/192031-gasket-genuine-volvo-penta)
> Updated: 2026-10-07