# 20532245 Solenoid | Genuine Volvo Penta Part

## 🔧 Product Description

This genuine Volvo Penta solenoid is an OEM service component used in the 24 V Fuel-Shutoff / Stop Solenoid. It is manufactured to the original Volvo Penta dimensional, material and interface requirements for the documented Volvo Penta D5A/D7A/D7C and TD/TAD4-7 industrial diesel application. Technical identification: 24 V energised-to-stop fuel-control solenoid. In service, it converts an electrical command into controlled mechanical movement to operate the fuel-stop, starting or auxiliary function. Selection must be confirmed by OEM part number 20532245, the exact model/product number, serial number and installed assembly configuration.

## 🚤 Compatibility

Typically suits:

-   Volvo Penta D5A-B TA
-   Volvo Penta D5A-T
-   Volvo Penta D5A-TA
-   Volvo Penta TD420VE
-   Volvo Penta D7A-B TA
-   Volvo Penta D7A-T
-   Volvo Penta D7A-TA
-   Volvo Penta D7C-B TA
-   Volvo Penta D7C-TA
-   Volvo Penta TAD620VE
-   Volvo Penta TAD720VE
-   Volvo Penta TAD721VE
-   Volvo Penta TAD420VE
-   Volvo Penta TAD520VE
-   Volvo Penta MD2010
-   Volvo Penta MD2010B

-   **Engine Family:** D, TD, TAD, MD

## ⚙️ Key Features

-   Genuine Volvo Penta OEM solenoid
-   OEM part number 20532245
-   Technical distinction: 24 V energised-to-stop fuel-control solenoid
-   Confirm system voltage and stroke direction, inspect linkage freedom and connector condition, then verify positive actuation through repeated start/stop cycles.

## 🔌 Function

Converts an electrical command into controlled mechanical movement to operate the fuel-stop, starting or auxiliary function. Confirm system voltage and stroke direction, inspect linkage freedom and connector condition, then verify positive actuation through repeated start/stop cycles.

## ⚠️ Common Signs of Failure

-   No movement or incomplete stroke when energised
-   Intermittent start, stop or control operation
-   Open/short circuit coil, excessive current draw or blown fuse
-   Engine fails to start, fails to stop or loses the associated function
-   Burnt connector, sticking plunger or linkage binding

## 🛠️ Service Notes

-   Check the replacement is the one specified for your engine and for its system voltage — a solenoid on the wrong voltage either will not pull in or will burn out
-   Isolate the battery before disconnecting it, and make up clean, tight, moisture-protected connections; a corroded terminal or poor earth imitates a failed solenoid
-   Before condemning one, check that the plunger and anything it operates move freely by hand, since a stiff linkage or valve will stall a healthy solenoid
-   Refit it in the original position and orientation, clear of standing bilge water and of heat, and support the wiring so it does not hang on the terminals
-   Test the function it controls, and that it releases as well as pulls in, before closing everything up

## 🔄 Supersession & Cross Reference

### OEM Supersession Chain

-   20532245 → Supersedes 20464443

### OEM / Related Numbers

-   20464443 earlier number superseded by this part

### Other-Brand OEM Numbers

-   Deutz: 04229741

### Aftermarket / Verified Equivalents

-   INPOST: 04229741 24 V shut-off solenoid

## 📦 Condition

-   Genuine Volvo Penta part
-   Brand new
-   Supplied in original or equivalent packaging

## Details

- **Price:** 807.14 AUD
- **Vendor:** Volvo Penta
- **Type:** Engine Controls
- **Tags:** Volvo Penta

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| Default Title | 807.14 AUD | In stock |

## Images

- 20532245 Solenoid | Genuine Volvo Penta Part

---

> Source: [Sawley's Auto and Marine](https://www.sawleysautoandmarine.com.au/products/20532245-solenoid-genuine-volvo-penta)
> Updated: 2026-10-09