# 20723984 Bracket | Genuine Volvo Penta Part

## 🔧 Product Description

Right-side engine support or mounting bracket used on the TAD420VE. It positions the engine or associated support component at the original installation height and alignment.

## 🚤 Compatibility

-   **Engine Family:** TD, TAD
-   **HP Range:** Approximately 140 HP
-   **Year Range:** Approximately late 1990s-2000s

Full model list at the end of this description.

## ⚙️ Key Features

-   Right-hand bracket configuration
-   OEM mounting-hole spacing and structural geometry
-   Carries engine/accessory load into the installation frame
-   Maintains alignment with the matching left-side support arrangement
-   Serial and installation configuration must be checked before replacement
-   Engine type: 4.8 L four-cylinder turbocharged industrial diesel

## 🔌 Function

Transfers engine or accessory load into the mounting frame while preserving the original position and alignment.

## ⚠️ Common Signs of Failure

-   Cracks, distortion or corrosion around the mounting points
-   Engine or accessory misalignment
-   Abnormal vibration caused by a loose or damaged support
-   Elongated bolt holes or repeatedly loosening fasteners
-   Contact between the engine and surrounding installation structure

## 🛠️ Service Notes

-   Offer the bracket up and start every fastener by hand before tightening any of them, so the component is not pulled into a strained position
-   Check the mating faces are clean, flat and free of corrosion scale — a bracket that does not sit flat will work loose and let the component move
-   Renew self-locking nuts, lock washers, tab washers or thread-locking compound wherever the original assembly used them, and tighten to the figure given in the workshop manual for your engine
-   Where the bracket carries a rubber mount or bush, renew that at the same time rather than reusing a perished one
-   On brackets in the inlet and exhaust area, never force alignment to make the holes line up — cure the misalignment at its source, or the bracket and the component it holds will both crack

## 🔄 Supersession & Cross Reference

### OEM Supersession Chain

-   20723984 → Supersedes 20405815

### OEM / Related Numbers

-   20405815 earlier number superseded by this part
-   20405731 left-side bracket used in the applicable earlier configuration
-   TAD420VE engine mounts and frame hardware

## 📦 Condition

-   Genuine Volvo Penta part
-   Brand new
-   Supplied in original or equivalent packaging

## 🔎 Full Model Compatibility

Typically suits:

-   Volvo Penta TAD520GE, TAD520VE
-   Volvo Penta TAD530GE MECH, TAD530GE EDC4
-   Volvo Penta TAD531GE MECH, TAD531GE EDC4
-   Volvo Penta TAD720GE, TAD720VE
-   Volvo Penta TAD721GE, TAD721VE
-   Volvo Penta TAD722GE, TAD722VE
-   Volvo Penta TAD730GE MECH, TAD730GE EDC4
-   Volvo Penta TAD731GE MECH, TAD731GE EDC4
-   Volvo Penta TAD750GE, TAD750VE
-   Volvo Penta TAD420VE
-   Volvo Penta TAD532GE EDC4
-   Volvo Penta TAD550GE
-   Volvo Penta TAD551GE
-   Volvo Penta TAD620VE
-   Volvo Penta TAD650VE
-   Volvo Penta TAD660VE
-   Volvo Penta TAD732GE EDC4
-   Volvo Penta TAD733GE EDC4
-   Volvo Penta TAD751GE
-   Volvo Penta TAD752GE
-   Volvo Penta TAD753GE
-   Volvo Penta TAD754GE
-   Volvo Penta TAD760VE
-   Volvo Penta TD420VE
-   Volvo Penta TD520GE
-   Volvo Penta TD720GE

## Details

- **Price:** 200.26 AUD
- **Vendor:** Volvo Penta
- **Type:** Brackets & Mounts
- **Tags:** Volvo Penta

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| Default Title | 200.26 AUD | In stock |

## Images

- 20723984 Bracket | Genuine Volvo Penta Part

---

> Source: [Sawley's Auto and Marine](https://www.sawleysautoandmarine.com.au/products/20723984-bracket-genuine-volvo-penta)
> Updated: 2026-10-12