# 21402614 Bracket | Genuine Volvo Penta Part

## 🔧 Product Description

Genuine mounting bracket used to support the engine control unit and associated electrical hardware on Volvo Penta D3 G- and H-generation marine diesel engines. It maintains module vibration isolation, connector clearance and harness routing.

## 🚤 Compatibility

Typically suits:

-   Volvo Penta D3-220I-G
-   Volvo Penta D3-140A-G
-   Volvo Penta D3-170A-G
-   Volvo Penta D3-200A-G
-   Volvo Penta D3-220A-G
-   Volvo Penta D3-140I-G
-   Volvo Penta D3-110I-G
-   Volvo Penta D3-150I-G
-   Volvo Penta D3-170I-G
-   Volvo Penta D3-200I-G
-   Volvo Penta D3-110I-H
-   Volvo Penta D3-140A-H
-   Volvo Penta D3-170A-H
-   Volvo Penta D3-200A-H
-   Volvo Penta D3-220A-H
-   Volvo Penta D3-150I-H
-   Volvo Penta D3-170I-H
-   Volvo Penta D3-200I-H
-   Volvo Penta D3-220I-H
-   Volvo Penta D3-140I-H

-   **Engine Family:** D
-   **HP Range:** 110-220 HP

## ⚙️ Key Features

-   D3 G/H engine-control unit bracket
-   Supports control unit 21092158
-   Factory mounting-hole and module-clearance geometry
-   Maintains wiring-harness and connector access
-   Used with vibration damper 21192790
-   Full D3 110HP-220HP G/H fitment

## 🔌 Function

The bracket supports and isolates the engine control unit while keeping the connectors, relay, fuse and harness branches in their designed positions.

## ⚠️ Common Signs of Failure

-   Control unit vibrating excessively
-   Loose module mounting
-   Harness or connector strain
-   Intermittent electronic faults caused by movement
-   Vibration damper separation

## 🛠️ Service Notes

-   Offer the bracket up and start every fastener by hand before tightening any of them, so the component is not pulled into a strained position
-   Check the mating faces are clean, flat and free of corrosion scale — a bracket that does not sit flat will work loose and let the component move
-   Renew self-locking nuts, lock washers, tab washers or thread-locking compound wherever the original assembly used them, and tighten to the figure given in the workshop manual for your engine
-   Where the bracket carries a rubber mount or bush, renew that at the same time rather than reusing a perished one
-   On brackets in the inlet and exhaust area, never force alignment to make the holes line up — cure the misalignment at its source, or the bracket and the component it holds will both crack

## 🔄 Supersession & Cross Reference

### OEM Supersession Chain

-   21402614 → Supersedes 21317252

### OEM / Related Numbers

-   21317252 earlier number superseded by this part
-   21092158 - Engine control unit
-   22427251 - Wiring harness
-   21400091 - Relay
-   21445385 - Related brackets
-   21759155 - Related brackets
-   21847110 - Stop button
-   21738845 - Cover
-   21445306 - Fuse
-   21192790 - Vibration damper
-   31331765 - Sensor
-   30637803 - Bracket
-   3840677 - Connection cable
-   3586269 - Warehouse software
-   3586268 - VODIA software

## 📦 Condition

-   Genuine Volvo Penta part
-   Brand new
-   Supplied in original or equivalent packaging

## Details

- **Price:** 134.73 AUD
- **Vendor:** Volvo Penta
- **Type:** Brackets & Mounts
- **Tags:** Volvo Penta

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| Default Title | 134.73 AUD | In stock |

## Images

- 21402614 Bracket | Genuine Volvo Penta Part
- 21402614 Bracket | Genuine Volvo Penta Part - photo 2 of 2

---

> Source: [Sawley's Auto and Marine](https://www.sawleysautoandmarine.com.au/products/21402614-bracket-genuine-volvo-penta)
> Updated: 2026-09-07