# 22104272 Cylinder Liner Kit | Genuine Volvo Penta Part

## 🔧 Product Description

A genuine Volvo Penta wet cylinder-liner and seal package for one cylinder of selected D9 engines classified as cylinder rating 1, 2 or 3. Six kits are required for a complete inline-six engine, and the liner classification must match the corresponding piston and ring specification.

## 🚤 Compatibility

Typically suits:

-   Volvo Penta D9A2L MH
-   Volvo Penta D9A2M MP
-   Volvo Penta TAD943VE
-   Volvo Penta TAD940VE
-   Volvo Penta TAD941VE
-   Volvo Penta TAD942VE

-   **Engine Family:** D, TAD

## ⚙️ Key Features

-   Genuine Volvo Penta D9 wet-liner kit
-   Correct Volvo Penta part number 22104272
-   Configured for cylinder rating 1-3
-   Includes liner and complete three-ring liner-seal package
-   Six kits are required for a complete six-cylinder engine
-   Engine type: Volvo Penta D9 inline six-cylinder diesel
-   6 used per assembly

## 📋 Kit Contents

-   1 × wet cylinder liner - 21719825
-   1 × cylinder-liner gasket and seal kit - 85103699
-   1 × upper liner sealing ring - 422713, supplied within 85103699
-   1 × lower liner sealing ring - 8148066, supplied within 85103699
-   1 × lower liner sealing ring - 8148067, supplied within 85103699
-   Piston-ring kit 20869780 for rating 1-3 is related and is serviced separately

## 🔌 Function

The liner forms the replaceable cylinder bore, while the three sealing rings prevent coolant leakage around the wet-liner base and upper register.

## ⚠️ Common Signs of Failure

-   Coolant contamination of engine oil
-   Pitted, cracked or worn wet liner
-   Low compression or excessive crankcase blow-by
-   Liner protrusion outside specification
-   Incorrect rating produces unacceptable piston clearance

## 🛠️ Service Notes

-   Clean the liner seats and the O-ring grooves in the block thoroughly and check them for corrosion pitting or fretting before any liner goes in — a poor seat is the usual cause of a repeat failure
-   Measure liner protrusion above the block face dry, without the O-rings fitted, taking readings at several points around each liner and comparing them with the figures in the workshop manual for your engine — and do not try to correct insufficient protrusion by stacking extra rings or shims under the liner flange
-   Keep each liner with its own bore position once measured, and fit the O-rings in the order and orientation specified, lubricated as the manual directs
-   Fit the liners with an appropriate press or drawing arrangement so they go in square, never by hammering
-   Protect the finished bores from rust and knocks until the pistons go in, and never run a new liner against worn or reused rings

## 🔄 Supersession & Cross Reference

### OEM Supersession Chain

-   22104272 → Supersedes 20866676 → Supersedes 20508852

### OEM / Related Numbers

-   20866676 earlier number superseded by this part
-   3817085 earlier number superseded by this part
-   20508852 earlier number superseded by this part
-   21719825 cylinder liner
-   85103699 seal kit
-   422713 upper sealing ring
-   8148066 lower sealing ring
-   8148067 lower sealing ring
-   20869780 related rating 1-3 piston-ring kit
-   85103701 related reference

### Other-Brand OEM Numbers

-   VOE22104272

### Aftermarket / Verified Equivalents

-   SLP: application-matched D9 rating 1-3 liner and seal kit

## 📦 Condition

-   Genuine Volvo Penta part
-   Brand new
-   Supplied in original or equivalent packaging

## Details

- **Price:** 1411.75 AUD
- **Vendor:** Volvo Penta
- **Type:** Service & Repair Kits
- **Tags:** Volvo Penta

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| Default Title | 1411.75 AUD | In stock |

## Images

- 22104272 Cylinder Liner Kit | Genuine Volvo Penta Part

---

> Source: [Sawley's Auto and Marine](https://www.sawleysautoandmarine.com.au/products/22104272-cylinder-liner-kit-genuine-volvo-penta)
> Updated: 2026-10-10