# 22366011 Flange | Genuine Volvo Penta Part

## 🔧 Product Description

This genuine Volvo Penta turbocharger / exhaust connection flange is used in the following application: Volvo Penta TAD5 and TAD8 industrial turbocharger / exhaust assemblies. Forms the rigid, concentric sealing interface between the turbocharger/exhaust components so the V-clamp can apply even load around the joint. Correct alignment prevents exhaust leakage, clamp distortion and stress cracking in adjoining pipework.

## 🚤 Compatibility

Typically suits:

-   Volvo Penta TAD840GE
-   Volvo Penta TAD552VE
-   Volvo Penta TAD853VE
-   Volvo Penta TAD570-72VE
-   Volvo Penta TAD570-71VE-B
-   Volvo Penta TAD550-51VE
-   Volvo Penta TAD540-42VE
-   Volvo Penta TAD840-43VE
-   Volvo Penta TAD850-52VE
-   Volvo Penta TAD870-73VE

-   **Engine Family:** TAD

## ⚙️ Key Features

-   Machined flange for the original turbocharger and exhaust-connection diameter
-   Provides the correct V-clamp seating profile and axial alignment
-   Designed for sustained exhaust temperature and thermal cycling
-   Supports accurate positioning of the connecting pipe and turbocharger outlet
-   Flange only; V-clamp, sealing gasket, connecting pipe and fasteners are separate
-   Inspect both mating faces and the clamp profile before installation

## 🔌 Function

Forms the rigid, concentric sealing interface between the turbocharger/exhaust components so the V-clamp can apply even load around the joint. Correct alignment prevents exhaust leakage, clamp distortion and stress cracking in adjoining pipework.

## ⚠️ Common Signs of Failure

-   Black soot tracks around the flange or V-clamp
-   Exhaust smell or ticking/hissing under load
-   Warped, cracked or eroded sealing lip
-   Repeated V-clamp loosening or breakage
-   Misalignment between the turbo outlet and connecting pipe
-   Heat damage to nearby hoses, wiring or shields

## 🛠️ Service Notes

-   Clean both mating faces back to clean metal and check them for flatness and for burrs or old gasket left in the sealing area; a face pulled up around a stud hole will not seal however hard it is tightened
-   Always fit a new gasket, seal or O-ring where the joint uses one, and only use a jointing compound if the workshop manual for your engine calls for one at that joint
-   Draw the fasteners up evenly in stages, working across the flange rather than round it, and finish to the tightening sequence and figures given for your engine
-   Inspect studs, nuts and threads while the joint is apart and renew anything corroded, stretched or seized — exhaust-side fasteners rarely come out twice
-   Re-check the joint for leaks once the engine has been up to working temperature and cooled again

## 🔄 Supersession & Cross Reference

### OEM / Related Numbers

-   21472836 - associated V-clamp
-   21750927 - associated connecting pipe in applicable TAD5 installations
-   21860329 - associated exhaust gasket in applicable configurations
-   21464129 - associated gasket in applicable configurations
-   22052114 - associated exhaust manifold on selected TAD5 engines
-   22313027 - associated exhaust manifold on selected TAD8 engines
-   21685083 - associated exhaust-manifold reference in other catalogued TAD8 configurations
-   21993015 - associated turbocharger-speed sensor
-   23037075 - associated turbocharger in applicable installations

### OEM Reman Alternatives

-   3801794 - associated remanufactured turbocharger reference

## 📦 Condition

-   Genuine Volvo Penta part
-   Brand new
-   Supplied in original or equivalent packaging

## Details

- **Price:** 229.36 AUD
- **Vendor:** Volvo Penta
- **Type:** Drives & Propulsion
- **Tags:** Volvo Penta

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| Default Title | 229.36 AUD | In stock |

## Images

- 22366011 Flange | Genuine Volvo Penta Part
- 22366011 Flange | Genuine Volvo Penta Part - photo 2 of 2

---

> Source: [Sawley's Auto and Marine](https://www.sawleysautoandmarine.com.au/products/22366011-flange-genuine-volvo-penta)
> Updated: 2026-09-06