# 22397276 Gasket | Genuine Volvo Penta Part

## 🔧 Product Description

A genuine Volvo Penta upper nut gasket used in the propeller/drive fastening arrangement. It is paired in the service system with lower nut gasket 21877102 and provides the sealing or protective interface specified for the upper propeller-nut position. Because propeller hardware differs between drive and propeller configurations, the drive serial number and existing nut arrangement should be checked before ordering.

## 🚤 Compatibility

Typically suits:

-   Volvo Penta V8-380-CE-A
-   Volvo Penta V8-380-C-B
-   Volvo Penta V8-380-CE-B
-   Volvo Penta V8-380-C-D
-   Volvo Penta V8-380-CE-D
-   Volvo Penta V8-430-CE-D
-   Volvo Penta V8-350-C-D
-   Volvo Penta V8-350-CE-D
-   Volvo Penta V8-380-C-A

-   **Engine Family:** V
-   **HP Range:** 350-430 HP

## ⚙️ Key Features

-   OEM gasket for the upper propeller-nut position
-   Paired service reference with lower nut gasket 21877102
-   Protects the adjoining nut and propeller-hardware interface
-   Correct material and dimensions for the specified Volvo Penta arrangement
-   Should be renewed when damaged, compressed or removed during propeller service
-   Small but important component in maintaining the original hardware stack-up

## 🔌 Function

The gasket forms the specified interface beneath or around the upper propeller nut. It helps maintain the correct hardware stack, protects mating surfaces and supports a clean, secure propeller installation.

## ⚠️ Common Signs of Failure

-   Gasket split, flattened or missing
-   Corrosion around the upper propeller nut
-   Propeller hardware no longer seating correctly
-   Water and debris trapped around the nut interface
-   Damage discovered during propeller removal
-   Repeated loosening caused by an incorrectly assembled hardware stack

## 🛠️ Service Notes

-   Fit a new gasket every time the joint is disturbed — a gasket takes a permanent set once it has been torqued and will not seal reliably a second time
-   Scrape both faces back to clean bare metal, keeping the blade at a shallow angle so it lifts the old material without gouging the surface, and use a plastic scraper on aluminium castings
-   Check the faces for flatness, cracks and corrosion pitting, and make sure no old gasket, carbon or hardened sealant is left in the corners or around the bolt holes
-   Fit the gasket dry unless the workshop manual for your engine calls for a sealant, and then only the type it specifies — surplus sealant squeezes out into oil, coolant and fuel passages
-   Draw the fasteners down progressively in the sequence and to the torque given in the manual for your engine, and recheck after the first heat cycle where the manual asks for it

## 🔄 Supersession & Cross Reference

### Aftermarket / Verified Equivalents

-   Related lower nut gasket: 21877102

## 📦 Condition

-   Genuine Volvo Penta part
-   Brand new
-   Supplied in original or equivalent packaging

## Details

- **Price:** 35.72 AUD
- **Vendor:** Volvo Penta
- **Tags:** Volvo Penta

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| Default Title | 35.72 AUD | In stock |

## Images

- 22397276 Gasket | Genuine Volvo Penta Part

---

> Source: [Sawley's Auto and Marine](https://www.sawleysautoandmarine.com.au/products/22397276-gasket-genuine-volvo-penta)
> Updated: 2026-08-22