# 23095840 Kit | Genuine Volvo Penta Part

## 🔧 Product Description

A genuine emergency-stop switch package for the electrical shutdown unit on selected D8 and D13 commercial marine engines. The button provides a dedicated hard-wired command to stop the engine through the shutdown control circuit.

## 🚤 Compatibility

Typically suits:

-   Volvo Penta D13C3-B MH
-   Volvo Penta D13C1-B MH
-   Volvo Penta D13C4-B MH
-   Volvo Penta D8A5-A MH
-   Volvo Penta D8A6-A MH
-   Volvo Penta D8A5-A MG
-   Volvo Penta D8A6-A MG
-   Volvo Penta D8A4-A MP
-   Volvo Penta D13C4-B MP
-   Volvo Penta D13C5-B MP
-   Volvo Penta D13C6-A MP
-   Volvo Penta D13C1-A MH
-   Volvo Penta D13C2-A MH
-   Volvo Penta D13C5-A MP
-   Volvo Penta D13C2-A MG
-   Volvo Penta D13C1-A MG
-   Volvo Penta D8A3-A MP
-   Volvo Penta D13C8-B MP
-   Volvo Penta D8A7-A MP
-   Volvo Penta D8A8-A MP

-   **Engine Family:** D
-   **HP Range:** Approximately 0-550 HP
-   **Year Range:** Approximately 2010s

## ⚙️ Key Features

-   Genuine electrical emergency-stop package
-   Includes push button and both specified circuit resistors
-   Used with the Volvo Penta shutdown-module wiring
-   Designed for commercial and heavy-duty marine installations
-   Exact shutdown-unit revision must be confirmed
-   Engine type: Volvo Penta D8 or D13 electronically controlled commercial marine diesel

## 📋 Kit Contents

-   Emergency-stop push button - Volvo Penta 23094365
-   2.2kΩ, 3W, 5% resistor - Volvo Penta 21448405
-   360Ω, 3W, 5% resistor - Volvo Penta 22855031

## 🔌 Function

Pressing the emergency-stop button changes the shutdown-circuit resistance and commands the shutdown module to stop the engine.

## ⚠️ Common Signs of Failure

-   Emergency-stop button does not stop the engine
-   Shutdown circuit shows an open or short circuit
-   Push button is seized, damaged or water-contaminated
-   Resistor value is outside specification
-   Shutdown-system fault remains active after wiring checks

## 🛠️ Service Notes

-   Check the kit contents against the parts list for your engine before you start, and confirm it is the kit specified for your engine's serial number — kit contents change between engine versions
-   Lay the contents out and identify every item against the assembly as it comes apart, so nothing is left over at the end
-   Use all the new parts supplied and discard the old ones, even where an old item still looks serviceable; the kit is packaged as a complete replacement for what it covers
-   While access is open, clean and inspect the mating parts that are not in the kit — new seals, gaskets or wearing parts fitted to a worn housing, shaft or face will not last
-   Tighten, set and adjust to the figures given in the workshop manual for your engine, and renew any single-use fasteners or locking devices the kit provides

## 🔄 Supersession & Cross Reference

### OEM / Related Numbers

-   23095841 - related shutdown-module override switch kit
-   22954727 - related 11,000mm extension wiring harness
-   23088403 - related diode
-   22754802 - related shutdown control-unit references
-   23288404 - related shutdown control-unit references

## 📦 Condition

-   Genuine Volvo Penta part
-   Brand new
-   Supplied in original or equivalent packaging

## Details

- **Price:** 774.72 AUD
- **Vendor:** Volvo Penta
- **Type:** Service & Repair Kits
- **Tags:** Volvo Penta

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| Default Title | 774.72 AUD | In stock |

## Images

- 23095840 Kit | Genuine Volvo Penta Part

---

> Source: [Sawley's Auto and Marine](https://www.sawleysautoandmarine.com.au/products/23095840-kit-genuine-volvo-penta)
> Updated: 2026-10-09