{"product_id":"11127387-plug-genuine-volvo-penta","title":"11127387 Plug | Genuine Volvo Penta Part","description":"\u003ch2\u003e\n 🔧 Product Description\n\u003c\/h2\u003e\n\u003cp\u003e\n Genuine Volvo Penta plug, part number 11127387, used as a sealing or blanking closure on the TWD and TAD 12-litre engine series. It closes off a machined port or passage so the surrounding circuit holds pressure and stays free of contamination. Supplied as a single item with a net weight of approximately 0.08 kg.\n\u003c\/p\u003e\n\u003ch2\u003e\n 🚤 Compatibility\n\u003c\/h2\u003e\n\u003cp\u003e\n Typically suits:\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Volvo Penta TWD1240VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1241GE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1242GE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1250VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1251VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1252VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1250-52VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1240GE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1241VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1242VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1241-42VE\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Engine Family:\n  \u003c\/strong\u003e\n  TWD, TAD\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   HP Range:\n  \u003c\/strong\u003e\n  Approximately 400-500 HP\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Year Range:\n  \u003c\/strong\u003e\n  Approximately late 1990s - 2000s\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n ⚙️ Key Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  OEM Volvo Penta part number 11127387\n \u003c\/li\u003e\n \u003cli\u003e\n  Net weight approximately 0.082 kg (0.08 kg)\n \u003c\/li\u003e\n \u003cli\u003e\n  Fits TWD and TAD 12-litre industrial and genset engine families, including TAD1240GE, TAD1241GE, TAD1242GE, TAD1241-42VE and TAD1250-52VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Supplied as an individual component\n \u003c\/li\u003e\n \u003cli\u003e\n  Current part number with no superseded references listed\n \u003c\/li\u003e\n \u003cli\u003e\n  Engine type: Volvo Penta inline 6-cylinder 12-litre generator diesel\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔌 Function\n\u003c\/h2\u003e\n\u003cp\u003e\n The plug seals a machined opening, threaded port or unused passage in an engine casting or housing so the circuit behind it remains pressure-tight. It prevents loss of oil, coolant or fuel and keeps dirt and moisture out of the passage.\n\u003c\/p\u003e\n\u003ch2\u003e\n ⚠️ Common Signs of Failure\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Weeping or dripping of oil, coolant or fuel around the plug seat\n \u003c\/li\u003e\n \u003cli\u003e\n  Loss of system pressure or slow pressure bleed-down\n \u003c\/li\u003e\n \u003cli\u003e\n  Corroded, pitted or damaged sealing face preventing a tight seal\n \u003c\/li\u003e\n \u003cli\u003e\n  Rounded, stripped or seized drive head that will not torque correctly on refitting\n \u003c\/li\u003e\n \u003cli\u003e\n  Plug working loose from vibration, leaving a wet residue trail on the casting\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🛠️ Service Notes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Clean the threads and the seating face before fitting, and make sure the opening itself is clear of old sealant, swarf and corrosion\n \u003c\/li\u003e\n \u003cli\u003e\n  Renew the sealing washer or O-ring where one is fitted rather than reusing a flattened one, and only use thread sealant where the workshop manual for your engine calls for it\n \u003c\/li\u003e\n \u003cli\u003e\n  Tighten to the figure given in the workshop manual for your engine — plugs in aluminium and other soft castings strip easily, and a plug pulled up hard to cure a leak usually distorts the seat and makes it worse\n \u003c\/li\u003e\n \u003cli\u003e\n  Where the plug closes an oil, fuel or coolant passage, run the engine up to temperature afterwards and check the joint under pressure before signing the job off\n \u003c\/li\u003e\n \u003cli\u003e\n  Keep removed plugs paired with the holes they came out of during a strip-down — plugs of very similar appearance often differ in thread, reach or sealing type\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔄 Supersession \u0026amp; Cross Reference\n\u003c\/h2\u003e\n\u003ch3\u003e\n OEM \/ Related Numbers\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  11127388 - Matching lock washer\n \u003c\/li\u003e\n \u003cli\u003e\n  11128689 - Related flywheel housing\n \u003c\/li\u003e\n \u003cli\u003e\n  11031785 - Related flywheel-housing plug\n \u003c\/li\u003e\n \u003cli\u003e\n  11031769 - Related lock washer\n \u003c\/li\u003e\n \u003cli\u003e\n  421158 - Related sealing ring\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 📦 Condition\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Genuine Volvo Penta part\n \u003c\/li\u003e\n \u003cli\u003e\n  Brand new\n \u003c\/li\u003e\n \u003cli\u003e\n  Supplied in original or equivalent packaging\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Volvo Penta","offers":[{"title":"Default Title","offer_id":53380932632868,"sku":"B944635","price":104.92,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8115\/7924\/files\/original_6abf8577-dfb1-4150-b638-1b7c9570ad60.jpg?v=1777126030","url":"https:\/\/www.sawleysautoandmarine.com.au\/products\/11127387-plug-genuine-volvo-penta","provider":"Sawley's Auto and Marine","version":"1.0","type":"link"}