{"product_id":"11127393-gasket-genuine-volvo-penta","title":"11127393 Gasket | Genuine Volvo Penta Part","description":"\u003ch2\u003e\n 🔧 Product Description\n\u003c\/h2\u003e\n\u003cp\u003e\n This is a genuine Volvo Penta gasket used to seal a mating joint on TAD-series turbocharged diesel engines. It is a lightweight, single-piece sealing component supplied individually, and is a routine replacement item whenever the joint it seals is opened for service. Gaskets of this type are intended for one-time use and should be renewed rather than reinstalled once disturbed.\n\u003c\/p\u003e\n\u003ch2\u003e\n 🚤 Compatibility\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Engine Family:\n  \u003c\/strong\u003e\n  TAD\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   HP Range:\n  \u003c\/strong\u003e\n  Approximately 350-800 HP\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Year Range:\n  \u003c\/strong\u003e\n  Approximately 2000s - 2010s\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n Full model list at the end of this description.\n\u003c\/p\u003e\n\u003ch2\u003e\n ⚙️ Key Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Genuine Volvo Penta OEM part number 11127393\n \u003c\/li\u003e\n \u003cli\u003e\n  Net weight approximately 0.014 kg\n \u003c\/li\u003e\n \u003cli\u003e\n  Fits TAD1340-TAD1385 and TAD1641-TAD1672 series turbocharged diesel engines\n \u003c\/li\u003e\n \u003cli\u003e\n  Sold as an individual gasket\n \u003c\/li\u003e\n \u003cli\u003e\n  Current part number with no recorded predecessor part number\n \u003c\/li\u003e\n \u003cli\u003e\n  Engine type: Volvo Penta inline 6-cylinder 13- and 16-litre diesel\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔌 Function\n\u003c\/h2\u003e\n\u003cp\u003e\n The gasket forms a sealed joint between two mating component faces, preventing leakage of fluid, air or exhaust gas and maintaining pressure within the system. It also compensates for minor surface irregularities between the two faces when the joint is torqued down.\n\u003c\/p\u003e\n\u003ch2\u003e\n ⚠️ Common Signs of Failure\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Visible fluid, oil or coolant seepage at the joint face\n \u003c\/li\u003e\n \u003cli\u003e\n  Audible air or exhaust gas leakage around the mating surfaces\n \u003c\/li\u003e\n \u003cli\u003e\n  Loss of pressure or reduced system performance traced to the sealed joint\n \u003c\/li\u003e\n \u003cli\u003e\n  Hardened, cracked, flattened or brittle gasket material on inspection\n \u003c\/li\u003e\n \u003cli\u003e\n  Repeated need to retighten fasteners at the joint to stop weeping\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🛠️ Service Notes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Fit a new gasket every time the joint is disturbed — a gasket takes a permanent set once it has been torqued and will not seal reliably a second time\n \u003c\/li\u003e\n \u003cli\u003e\n  Scrape both faces back to clean bare metal, keeping the blade at a shallow angle so it lifts the old material without gouging the surface, and use a plastic scraper on aluminium castings\n \u003c\/li\u003e\n \u003cli\u003e\n  Check the faces for flatness, cracks and corrosion pitting, and make sure no old gasket, carbon or hardened sealant is left in the corners or around the bolt holes\n \u003c\/li\u003e\n \u003cli\u003e\n  Fit the gasket dry unless the workshop manual for your engine calls for a sealant, and then only the type it specifies — surplus sealant squeezes out into oil, coolant and fuel passages\n \u003c\/li\u003e\n \u003cli\u003e\n  Draw the fasteners down progressively in the sequence and to the torque given in the manual for your engine, and recheck after the first heat cycle where the manual asks for it\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔄 Supersession \u0026amp; Cross Reference\n\u003c\/h2\u003e\n\u003ch3\u003e\n OEM \/ Related Numbers\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  17233221 - Related starter motor\n \u003c\/li\u003e\n \u003cli\u003e\n  21019175 - Related starter relay\n \u003c\/li\u003e\n \u003cli\u003e\n  22883465 - Related flywheel-housing references\n \u003c\/li\u003e\n \u003cli\u003e\n  78467590 - Related flywheel-housing references\n \u003c\/li\u003e\n \u003cli\u003e\n  78467591 - Related flywheel-housing references\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n Other-Brand OEM Numbers\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  VOE11127393 - Volvo aftermarket formatting\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n Aftermarket \/ Verified Equivalents\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  SLP: EPL-393\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 📦 Condition\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Genuine Volvo Penta part\n \u003c\/li\u003e\n \u003cli\u003e\n  Brand new\n \u003c\/li\u003e\n \u003cli\u003e\n  Supplied in original or equivalent packaging\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔎 Full Model Compatibility\n\u003c\/h2\u003e\n\u003cp\u003e\n Typically suits:\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Volvo Penta TAD1643VE-B, TAD1643VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1650VE-B\/51VE, TAD1650VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1340VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1341VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1342VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1343VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1344VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1345VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1350VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1351-53VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1360-62VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1363-65VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1371-75VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1381-85VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1384-85VE-IWP\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1641VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1642VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1660-62VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1662VE EU5\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1670-72VE\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Volvo Penta","offers":[{"title":"Default Title","offer_id":53380946034980,"sku":"R583857","price":14.74,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8115\/7924\/files\/original_57fefee9-1dd4-4445-813d-a1ced82a79c8.jpg?v=1788054021","url":"https:\/\/www.sawleysautoandmarine.com.au\/products\/11127393-gasket-genuine-volvo-penta","provider":"Sawley's Auto and Marine","version":"1.0","type":"link"}