{"product_id":"11705725-adjusting-washer-genuine-volvo-penta","title":"11705725 Adjusting Washer | Genuine Volvo Penta Part","description":"\u003ch2\u003e\n 🔧 Product Description\n\u003c\/h2\u003e\n\u003cp\u003e\n This is a genuine Volvo Penta adjusting washer from the fuel system group, supplied in the 1.30 mm thickness (TH=1,30mm). Adjusting washers of this type are used as calibrated shims to set the correct clearance or preload within fuel injection components, and the thickness is what distinguishes this washer from otherwise identical siblings. It fits a broad span of Volvo Penta 2000-series, MD, TMD, TAMD, AD, KAD and KAMD marine diesel engines.\n\u003c\/p\u003e\n\u003ch2\u003e\n 🚤 Compatibility\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Engine Family:\n  \u003c\/strong\u003e\n  TAMD, AD, TMD, KAD, KAMD\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   HP Range:\n  \u003c\/strong\u003e\n  Approximately 7.5-300 HP\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Year Range:\n  \u003c\/strong\u003e\n  Approximately mid-1970s - 2005\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n Full model list at the end of this description.\n\u003c\/p\u003e\n\u003ch2\u003e\n ⚙️ Key Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  OEM Volvo Penta part number 11705725\n \u003c\/li\u003e\n \u003cli\u003e\n  Thickness: 1.30 mm (TH=1,30mm)\n \u003c\/li\u003e\n \u003cli\u003e\n  System group: Fuel System\n \u003c\/li\u003e\n \u003cli\u003e\n  Net weight approximately 0.0023 kg\n \u003c\/li\u003e\n \u003cli\u003e\n  Supersedes and replaces earlier part number 243473\n \u003c\/li\u003e\n \u003cli\u003e\n  Fits 2001, 2002 and 2003 series plus TMD31, TAMD31, TAMD41, TAMD42, AD31, AD41, KAD42, KAD43, KAMD42 and KAMD43 marine diesel engines\n \u003c\/li\u003e\n \u003cli\u003e\n  Engine type: Volvo Penta mechanically injected marine diesel\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔌 Function\n\u003c\/h2\u003e\n\u003cp\u003e\n The adjusting washer acts as a precision shim, setting the correct clearance, height or preload inside the fuel injection assembly during service or reassembly. Selecting the correct thickness ensures the fuel system operates within its specified tolerances.\n\u003c\/p\u003e\n\u003ch2\u003e\n ⚠️ Common Signs of Failure\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Incorrect injection timing or delivery after a rebuild because the wrong shim thickness was fitted\n \u003c\/li\u003e\n \u003cli\u003e\n  Visible wear, scoring or flattening of the washer face reducing its effective thickness\n \u003c\/li\u003e\n \u003cli\u003e\n  Fuel weeping or seepage at the joint where the washer seats\n \u003c\/li\u003e\n \u003cli\u003e\n  Deformation, cracking or distortion from over-tightening or repeated reuse\n \u003c\/li\u003e\n \u003cli\u003e\n  Rough running, hard starting or reduced power traceable to out-of-specification fuel system clearance\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🛠️ Service Notes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  An adjusting washer is a precision-thickness shim: the correct one is whichever thickness gives the dimension called for in the workshop manual, so it is chosen by measurement rather than by simply matching what came out\n \u003c\/li\u003e\n \u003cli\u003e\n  Measure the washer itself with a micrometer before fitting — thickness is the whole function, and markings or part numbers are no substitute for a measured figure\n \u003c\/li\u003e\n \u003cli\u003e\n  Do not reuse a washer that is dished, indented, scored or corroded; a shim that has been distorted under clamp load will not restore the original setting\n \u003c\/li\u003e\n \u003cli\u003e\n  Clean the seat and the washer of oil, old sealant and burrs so the stack sits dead flat — a trapped burr is thicker than the tolerance you are shimming to\n \u003c\/li\u003e\n \u003cli\u003e\n  Where washers are refitted rather than renewed, keep each one with the component and position it came from, and record the thickness used so the setting can be reproduced later\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔄 Supersession \u0026amp; Cross Reference\n\u003c\/h2\u003e\n\u003ch3\u003e\n OEM Supersession Chain\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  11705725 → Supersedes 243473\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n OEM \/ Related Numbers\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  243473 earlier number superseded by this part\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n Other-Brand OEM Numbers\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Bosch: 2 430 102 430\n \u003c\/li\u003e\n \u003cli\u003e\n  Case IH: 1806242C1\n \u003c\/li\u003e\n \u003cli\u003e\n  Renault: 5001849793\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n Aftermarket \/ Verified Equivalents\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Magirus-Deutz: 01318335\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 📦 Condition\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Genuine Volvo Penta part\n \u003c\/li\u003e\n \u003cli\u003e\n  Brand new\n \u003c\/li\u003e\n \u003cli\u003e\n  Supplied in original or equivalent packaging\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔎 Full Model Compatibility\n\u003c\/h2\u003e\n\u003cp\u003e\n Typically suits:\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Volvo Penta 2003, 2003R, 2003R SOLAS, 2001AG, 2001B, 2001D, 2003D, 2002AG, 2002B, 2002D, 2003B, 2003B SOLAS, 2003 SOLAS, 2001, 2002, 2001R\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAMD31L-A, TAMD31M, TAMD31M-A, TAMD31P, TAMD31P-A, TAMD31S, TAMD31D\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta AD31D, AD31D-A, AD31L-A, AD31P-A, AD31XD\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta AD41D, AD41L-A, AD41P-A\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta KAD42B, KAD42P-A\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta KAMD42B, KAMD42P-A\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAMD41H-A, TAMD41P-A\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta KAD43P-A\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta KAMD43P-A\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAMD42WJ-A\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TMD31D\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Volvo Penta","offers":[{"title":"Default Title","offer_id":53380944232740,"sku":"4434118","price":19.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8115\/7924\/files\/original_e43c8c29-9212-4e94-8bac-37668ef1c100.jpg?v=1788053495","url":"https:\/\/www.sawleysautoandmarine.com.au\/products\/11705725-adjusting-washer-genuine-volvo-penta","provider":"Sawley's Auto and Marine","version":"1.0","type":"link"}