{"product_id":"11705734-adjusting-washer-genuine-volvo-penta","title":"11705734 Adjusting Washer | Genuine Volvo Penta Part","description":"\u003ch2\u003e\n 🔧 Product Description\n\u003c\/h2\u003e\n\u003cp\u003e\n This is a genuine Volvo Penta adjusting washer for the fuel system, supplied in the 1.60 mm thickness. Adjusting washers of this type are used as calibration shims within fuel injection pump and injector assemblies, where thickness selection sets the correct clearance or pre-load. The 1.60 mm dimension is what separates this item from otherwise identical washers offered in other thicknesses, so confirm the required shim size before ordering.\n\u003c\/p\u003e\n\u003ch2\u003e\n 🚤 Compatibility\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Engine Family:\n  \u003c\/strong\u003e\n  TAMD, AD, TMD, KAD, KAMD\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   HP Range:\n  \u003c\/strong\u003e\n  Approximately 7.5-300 HP\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Year Range:\n  \u003c\/strong\u003e\n  Approximately mid-1970s - 2005\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n Full model list at the end of this description.\n\u003c\/p\u003e\n\u003ch2\u003e\n ⚙️ Key Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  OEM Volvo Penta part number 11705734\n \u003c\/li\u003e\n \u003cli\u003e\n  Thickness: 1.60 mm (TH=1,60mm)\n \u003c\/li\u003e\n \u003cli\u003e\n  System group: Fuel System\n \u003c\/li\u003e\n \u003cli\u003e\n  Net weight approximately 0.0023 kg\n \u003c\/li\u003e\n \u003cli\u003e\n  Supersedes previous part numbers 11700451 and 243479\n \u003c\/li\u003e\n \u003cli\u003e\n  Fits 2001, 2002 and 2003 series, AD31\/AD41, TMD31, TAMD31\/TAMD41, TAMD42WJ and KAD\/KAMD42\/43 engines\n \u003c\/li\u003e\n \u003cli\u003e\n  Engine type: Volvo Penta mechanically injected marine diesel\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔌 Function\n\u003c\/h2\u003e\n\u003cp\u003e\n The adjusting washer acts as a precision shim in the fuel system, its selected thickness setting the correct clearance, height or pre-load within the assembly. Using the specified thickness maintains accurate fuel delivery timing and metering.\n\u003c\/p\u003e\n\u003ch2\u003e\n ⚠️ Common Signs of Failure\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Incorrect shim thickness causing fuel delivery or timing to fall outside specification\n \u003c\/li\u003e\n \u003cli\u003e\n  Visible wear, scoring or flattening on the washer faces after long service\n \u003c\/li\u003e\n \u003cli\u003e\n  Fuel leakage or loss of sealing pressure at the shimmed joint\n \u003c\/li\u003e\n \u003cli\u003e\n  Rough running, hard starting or poor power output traced to fuel pump calibration\n \u003c\/li\u003e\n \u003cli\u003e\n  Corrosion or deformation of the washer preventing correct seating\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🛠️ Service Notes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  An adjusting washer is a precision-thickness shim: the correct one is whichever thickness gives the dimension called for in the workshop manual, so it is chosen by measurement rather than by simply matching what came out\n \u003c\/li\u003e\n \u003cli\u003e\n  Measure the washer itself with a micrometer before fitting — thickness is the whole function, and markings or part numbers are no substitute for a measured figure\n \u003c\/li\u003e\n \u003cli\u003e\n  Do not reuse a washer that is dished, indented, scored or corroded; a shim that has been distorted under clamp load will not restore the original setting\n \u003c\/li\u003e\n \u003cli\u003e\n  Clean the seat and the washer of oil, old sealant and burrs so the stack sits dead flat — a trapped burr is thicker than the tolerance you are shimming to\n \u003c\/li\u003e\n \u003cli\u003e\n  Where washers are refitted rather than renewed, keep each one with the component and position it came from, and record the thickness used so the setting can be reproduced later\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔄 Supersession \u0026amp; Cross Reference\n\u003c\/h2\u003e\n\u003ch3\u003e\n OEM Supersession Chain\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  11705734 → Supersedes 11700451\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n OEM \/ Related Numbers\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  243479 earlier number superseded by this part\n \u003c\/li\u003e\n \u003cli\u003e\n  11700451 earlier number superseded by this part\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n Other-Brand OEM Numbers\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Bosch: 2 430 102 160\n \u003c\/li\u003e\n \u003cli\u003e\n  Case IH: 1806251C1\n \u003c\/li\u003e\n \u003cli\u003e\n  Cummins: 3905174\n \u003c\/li\u003e\n \u003cli\u003e\n  Renault: 5001850239\n \u003c\/li\u003e\n \u003cli\u003e\n  Hatz: 50437600\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n Aftermarket \/ Verified Equivalents\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Magirus-Deutz: 01318343\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 📦 Condition\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Genuine Volvo Penta part\n \u003c\/li\u003e\n \u003cli\u003e\n  Brand new\n \u003c\/li\u003e\n \u003cli\u003e\n  Supplied in original or equivalent packaging\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔎 Full Model Compatibility\n\u003c\/h2\u003e\n\u003cp\u003e\n Typically suits:\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Volvo Penta 2003, 2003R, 2003R SOLAS, 2001AG, 2001B, 2001D, 2003D, 2002AG, 2002B, 2002D, 2003B, 2003B SOLAS, 2003 SOLAS, 2001, 2002, 2001R\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAMD31L-A, TAMD31M, TAMD31M-A, TAMD31P, TAMD31P-A, TAMD31S, TAMD31D\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta AD31D, AD31D-A, AD31L-A, AD31P-A, AD31XD\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta AD41D, AD41L-A, AD41P-A\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta KAD42B, KAD42P-A\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta KAMD42B, KAMD42P-A\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAMD41H-A, TAMD41P-A\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta KAD43P-A\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta KAMD43P-A\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAMD42WJ-A\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TMD31D\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Volvo Penta","offers":[{"title":"Default Title","offer_id":53380999348516,"sku":"D616079","price":8.4,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8115\/7924\/files\/original_a45426b5-fa2c-41b2-814b-2e1e254a2c61.jpg?v=1788056277","url":"https:\/\/www.sawleysautoandmarine.com.au\/products\/11705734-adjusting-washer-genuine-volvo-penta","provider":"Sawley's Auto and Marine","version":"1.0","type":"link"}