{"product_id":"1543923-washer-genuine-volvo-penta","title":"1543923 Washer | Genuine Volvo Penta Part","description":"\u003ch2\u003e\n 🔧 Product Description\n\u003c\/h2\u003e\n\u003cp\u003e\n This is a genuine Volvo Penta washer from the cooling system group, supplied in the 75 mm length (L=75mm) specification that distinguishes it from other washers sharing the same name. It seats against a cooling system fastener or joint to spread load and maintain a stable, leak-free clamped connection. It fits the TAMD162, TAMD163, TAMD165, TAD1630\/1631, TWD1620\/1630 and TID162 series engines.\n\u003c\/p\u003e\n\u003ch2\u003e\n 🚤 Compatibility\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Engine Family:\n  \u003c\/strong\u003e\n  TWD, TID, TD, TAMD, TAD\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   HP Range:\n  \u003c\/strong\u003e\n  Approximately 468-770 HP\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Year Range:\n  \u003c\/strong\u003e\n  Approximately 1987-2005\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n Full model list at the end of this description.\n\u003c\/p\u003e\n\u003ch2\u003e\n ⚙️ Key Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Genuine Volvo Penta OEM part number 1543923\n \u003c\/li\u003e\n \u003cli\u003e\n  Dimension: L=75mm\n \u003c\/li\u003e\n \u003cli\u003e\n  System group: Cooling System\n \u003c\/li\u003e\n \u003cli\u003e\n  Net weight approximately 0.059 kg\n \u003c\/li\u003e\n \u003cli\u003e\n  Fits TWD1620\/1630, TID162, TD164, TAMD162, TAMD163, TAMD165 and TAD1630\/1631 series engines\n \u003c\/li\u003e\n \u003cli\u003e\n  Engine type: 16.1L inline-six turbocharged\/aftercooled diesel\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔌 Function\n\u003c\/h2\u003e\n\u003cp\u003e\n The washer distributes fastener load across the mating surface and helps maintain correct clamping force at a cooling system connection. Correct washer length and thickness are needed to keep the joint tight and prevent coolant leakage.\n\u003c\/p\u003e\n\u003ch2\u003e\n ⚠️ Common Signs of Failure\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Coolant seepage or weeping at the joint the washer seats against\n \u003c\/li\u003e\n \u003cli\u003e\n  Corrosion, pitting or scaling of the washer face\n \u003c\/li\u003e\n \u003cli\u003e\n  Flattening, deformation or cracking from over-torquing or age\n \u003c\/li\u003e\n \u003cli\u003e\n  Loss of clamping force allowing the fastener to loosen in service\n \u003c\/li\u003e\n \u003cli\u003e\n  Visible gap or misalignment between the washer and its mating surface\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🛠️ Service Notes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Check you are fitting the same type of washer that came out — plain, hardened, sealing and locking washers are not interchangeable, and the wrong one either fails to seal or fails to hold\n \u003c\/li\u003e\n \u003cli\u003e\n  Treat sealing washers on fuel, oil and coolant unions as single-use; they seal by deforming onto the faces, so a used one will not seal reliably a second time\n \u003c\/li\u003e\n \u003cli\u003e\n  Clean the seating faces and make sure the washer sits flat and square, fully under the head or nut, before tightening — a washer trapped on a chamfer or edge will crush unevenly\n \u003c\/li\u003e\n \u003cli\u003e\n  Tighten the fastener to the figure given in the workshop manual for your engine, and account for every washer on reassembly so none is left loose inside a housing or the engine bay\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔄 Supersession \u0026amp; Cross Reference\n\u003c\/h2\u003e\n\u003ch3\u003e\n OEM \/ Related Numbers\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1543891 coolant-pump hub\n \u003c\/li\u003e\n \u003cli\u003e\n  1556330 coolant circulation pump\n \u003c\/li\u003e\n \u003cli\u003e\n  8149980 complete coolant pump\n \u003c\/li\u003e\n \u003cli\u003e\n  1543908 sealing ring\n \u003c\/li\u003e\n \u003cli\u003e\n  276636 circulation-pump overhaul kit\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 📦 Condition\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Genuine Volvo Penta part\n \u003c\/li\u003e\n \u003cli\u003e\n  Brand new\n \u003c\/li\u003e\n \u003cli\u003e\n  Supplied in original or equivalent packaging\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔎 Full Model Compatibility\n\u003c\/h2\u003e\n\u003cp\u003e\n Typically suits:\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Volvo Penta TAMD162C-C, TAMD162A, TAMD162B, TAMD162C, TAMD162C-B\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TID162AG, TID162AGP, TID162AP, TID162APB\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1630G, TAD1630GE, TAD1630P\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAMD165A, TAMD165C, TAMD165P\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TWD1630G, TWD1630P, TWD1630V\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1631GE, TAD1631G\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAMD163A-A, TAMD163P-A\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TD164KAE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TWD1620G\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Volvo Penta","offers":[{"title":"Default Title","offer_id":53381047091492,"sku":"440104Z","price":83.28,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8115\/7924\/files\/original_dac315cd-80a6-4560-9939-fbd61e24c2c8.jpg?v=1788059622","url":"https:\/\/www.sawleysautoandmarine.com.au\/products\/1543923-washer-genuine-volvo-penta","provider":"Sawley's Auto and Marine","version":"1.0","type":"link"}