{"product_id":"1544652-hose-clamp-genuine-volvo-penta","title":"1544652 Hose Clamp | Genuine Volvo Penta Part","description":"\u003ch2\u003e\n 🔧 Product Description\n\u003c\/h2\u003e\n\u003cp\u003e\n This is a genuine Volvo Penta hose clamp from the cooling system group, used to secure coolant and water hoses to their connections and maintain a leak-free seal under operating pressure and vibration. It fits the TD, TID, TWD and TD\/TWD marine and industrial diesel engine families. This clamp supersedes the earlier tensioning band part number 476659.\n\u003c\/p\u003e\n\u003ch2\u003e\n 🚤 Compatibility\n\u003c\/h2\u003e\n\u003cp\u003e\n Typically suits:\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Volvo Penta TWD630ME\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TWD730ME\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TWD731VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TID71A\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TD730ME\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TD730VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TD70G\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TD71A\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TD71AW\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TD61A\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TD61AW\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TD630ME\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TD630VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TWD630VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TD610M\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TD610V\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Engine Family:\n  \u003c\/strong\u003e\n  TWD, TID, TD\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n ⚙️ Key Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Heavy-duty formed tensioning-band clamp\n \u003c\/li\u003e\n \u003cli\u003e\n  Supersedes earlier tensioning band 476659\n \u003c\/li\u003e\n \u003cli\u003e\n  Maintains uniform clamping load around a large hose or duct\n \u003c\/li\u003e\n \u003cli\u003e\n  Suitable for the original Volvo Penta hose and anchorage arrangement\n \u003c\/li\u003e\n \u003cli\u003e\n  Must be matched to the hose outside diameter and installation position\n \u003c\/li\u003e\n \u003cli\u003e\n  Engine type: Volvo Penta TD70 diesel\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔌 Function\n\u003c\/h2\u003e\n\u003cp\u003e\n The hose clamp compresses a coolant hose onto its spigot or connection to form a tight, pressure-holding joint. It keeps the hose retained in place despite engine vibration, thermal cycling and coolant pressure.\n\u003c\/p\u003e\n\u003ch2\u003e\n ⚠️ Common Signs of Failure\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Coolant seeping or dripping at the hose joint\n \u003c\/li\u003e\n \u003cli\u003e\n  Corrosion, pitting or rust on the band or screw housing\n \u003c\/li\u003e\n \u003cli\u003e\n  Stripped or seized tightening screw that will not hold torque\n \u003c\/li\u003e\n \u003cli\u003e\n  Loss of clamping tension allowing the hose to slip off the spigot\n \u003c\/li\u003e\n \u003cli\u003e\n  Cracked or distorted band after repeated retightening\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🛠️ Service Notes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Match the clamp to the hose outside diameter so the band closes well within its working range rather than at the very end of its travel\n \u003c\/li\u003e\n \u003cli\u003e\n  Position it over the spigot behind the bead or barb, with the screw where a driver or spanner can still reach it once everything is refitted\n \u003c\/li\u003e\n \u003cli\u003e\n  Tighten to seal, not to crush — an over-tightened worm-drive clamp cuts into soft hose and starts the leak you were trying to stop\n \u003c\/li\u003e\n \u003cli\u003e\n  Renew clamps when a hose is changed rather than reusing them, and keep band, housing and screw all marine-grade stainless so the clamp does not corrode against itself\n \u003c\/li\u003e\n \u003cli\u003e\n  Where two clamps are fitted to one connection, stagger the screw heads and recheck both after the first running period\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔄 Supersession \u0026amp; Cross Reference\n\u003c\/h2\u003e\n\u003ch3\u003e\n OEM Supersession Chain\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1544652 → Supersedes 476659\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n OEM \/ Related Numbers\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  476659 earlier number superseded by this part\n \u003c\/li\u003e\n \u003cli\u003e\n  849619 - related anchorage in a listed installation\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 📦 Condition\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Genuine Volvo Penta part\n \u003c\/li\u003e\n \u003cli\u003e\n  Brand new\n \u003c\/li\u003e\n \u003cli\u003e\n  Supplied in original or equivalent packaging\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Volvo Penta","offers":[{"title":"Default Title","offer_id":53380975821092,"sku":"4237302","price":48.09,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8115\/7924\/files\/original_b484b32e-e9ab-492b-9fdd-710fc6a6f398.jpg?v=1788054702","url":"https:\/\/www.sawleysautoandmarine.com.au\/products\/1544652-hose-clamp-genuine-volvo-penta","provider":"Sawley's Auto and Marine","version":"1.0","type":"link"}