{"product_id":"1556321-bushing-genuine-volvo-penta","title":"1556321 Bushing | Genuine Volvo Penta Part","description":"\u003ch2\u003e\n 🔧 Product Description\n\u003c\/h2\u003e\n\u003cp\u003e\n This genuine Volvo Penta bushing is a replaceable locating, spacing or bearing-support component used in the engine bearing or shaft support. It is manufactured to the original Volvo Penta dimensions and interface requirements so the supported component retains the specified clearance, spacing and location. In service, it provides a replaceable bearing surface and restores the specified shaft-to-housing clearance. Fitment is controlled by the exact engine or product configuration and serialised parts list; confirm OEM number 1556321 against the installed assembly before ordering.\n\u003c\/p\u003e\n\u003ch2\u003e\n 🚤 Compatibility\n\u003c\/h2\u003e\n\u003cp\u003e\n Typically suits:\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Volvo Penta TWD1630G\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TWD1630P\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TWD1630V\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TD164KAE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAMD162C-C\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1630G\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1630GE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1630P\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1631GE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAMD163A-A\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAMD163P-A\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAMD165A\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAMD165C\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAMD165P\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1631G\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Engine Family:\n  \u003c\/strong\u003e\n  TWD, TD, TAMD, TAD\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n ⚙️ Key Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  OEM Volvo Penta part number 1556321\n \u003c\/li\u003e\n \u003cli\u003e\n  Specified for use with part 1556319\n \u003c\/li\u003e\n \u003cli\u003e\n  System group: Engine\n \u003c\/li\u003e\n \u003cli\u003e\n  Net weight 0.186 kg\n \u003c\/li\u003e\n \u003cli\u003e\n  Fits TAMD162, TAMD163, TAMD165, TAD1630\/1631, TWD1630 and TD164 series 16-litre engines\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔌 Function\n\u003c\/h2\u003e\n\u003cp\u003e\n The bushing provides a replaceable bearing and locating surface between two components, maintaining correct alignment and absorbing wear that would otherwise damage the parent parts. Renewing it restores the designed clearance at the joint.\n\u003c\/p\u003e\n\u003ch2\u003e\n ⚠️ Common Signs of Failure\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Excessive play or movement at the joint the bushing supports\n \u003c\/li\u003e\n \u003cli\u003e\n  Visible ovalling, scoring or elongation of the bore\n \u003c\/li\u003e\n \u003cli\u003e\n  Knocking, rattling or squeaking noises under load\n \u003c\/li\u003e\n \u003cli\u003e\n  Misalignment or uneven wear on the mating component\n \u003c\/li\u003e\n \u003cli\u003e\n  Loose fit allowing the bushing to rotate or migrate in its housing\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🛠️ Service Notes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Check the housing bore and the shaft or pin that runs in the bushing before fitting a new one; a worn or scored mating part will chew out a new bushing quickly\n \u003c\/li\u003e\n \u003cli\u003e\n  Press bushings in squarely with a press and a correctly sized drift or mandrel — hammering one straight in distorts it and ruins the fit\n \u003c\/li\u003e\n \u003cli\u003e\n  Where the bushing has an oil hole, groove or slot, line it up with the feed in the housing before it is pressed home\n \u003c\/li\u003e\n \u003cli\u003e\n  Lubricate on assembly with the oil or grease specified for that part of the engine or drive, and follow the manual if it calls for the bore to be checked or sized after fitting\n \u003c\/li\u003e\n \u003cli\u003e\n  Do not soak a self-lubricating bushing in solvent or degreaser, and keep sealant and thread lock off the running surface\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 📦 Condition\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Genuine Volvo Penta part\n \u003c\/li\u003e\n \u003cli\u003e\n  Brand new\n \u003c\/li\u003e\n \u003cli\u003e\n  Supplied in original or equivalent packaging\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Volvo Penta","offers":[{"title":"Default Title","offer_id":53380528570660,"sku":"L757685","price":64.94,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8115\/7924\/files\/original_43ebb4cf-2a7d-49bc-8e5e-98751902abc5.png?v=1788057369","url":"https:\/\/www.sawleysautoandmarine.com.au\/products\/1556321-bushing-genuine-volvo-penta","provider":"Sawley's Auto and Marine","version":"1.0","type":"link"}