{"product_id":"1560272-spacer-washer-genuine-volvo-penta","title":"1560272 Spacer Washer | Genuine Volvo Penta Part","description":"\u003ch2\u003e\n 🔧 Product Description\n\u003c\/h2\u003e\n\u003cp\u003e\n This genuine Volvo Penta spacer washer is a replaceable locating, spacing or bearing-support component used in the belt-protector and bracket installation. It is manufactured to the original Volvo Penta dimensions and interface requirements so the supported component retains the specified clearance, spacing and location. Spacer washer dimensions: approximately 18 mm OD × 8.4 mm ID × 13 mm long. In service, it sets the required spacing and load distribution beneath the matched belt-protector fastener. Fitment is controlled by the exact engine or product configuration and serialised parts list; confirm OEM number 1560272 against the installed assembly before ordering.\n\u003c\/p\u003e\n\u003ch2\u003e\n 🚤 Compatibility\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Engine Family:\n  \u003c\/strong\u003e\n  TAMD, TWD, TD, TAD\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n Full model list at the end of this description.\n\u003c\/p\u003e\n\u003ch2\u003e\n ⚙️ Key Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  OEM Volvo Penta part number 1560272\n \u003c\/li\u003e\n \u003cli\u003e\n  Dimension: 18x8,4x13mm (outer diameter x bore x length)\n \u003c\/li\u003e\n \u003cli\u003e\n  System group: Inlet and Exhaust System\n \u003c\/li\u003e\n \u003cli\u003e\n  Net weight approximately 0.016 kg\n \u003c\/li\u003e\n \u003cli\u003e\n  Fits TAMD, TAD, TWD and TD series marine and industrial diesel engines\n \u003c\/li\u003e\n \u003cli\u003e\n  Quantity varies by assembly, most commonly two\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔌 Function\n\u003c\/h2\u003e\n\u003cp\u003e\n The spacer washer establishes a fixed distance between two mating surfaces or between a fastener and a component, preventing over-compression and holding assembly alignment. It also spreads fastener load across the joint face.\n\u003c\/p\u003e\n\u003ch2\u003e\n ⚠️ Common Signs of Failure\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Visible crushing, deformation or flattening of the spacer\n \u003c\/li\u003e\n \u003cli\u003e\n  Loose or repeatedly loosening fasteners at the joint\n \u003c\/li\u003e\n \u003cli\u003e\n  Misalignment or uneven seating of the mounted component\n \u003c\/li\u003e\n \u003cli\u003e\n  Corrosion, pitting or seizure onto the bolt or stud\n \u003c\/li\u003e\n \u003cli\u003e\n  Exhaust or intake leakage traced to incorrect joint spacing\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🛠️ Service Notes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  A spacer washer sets a dimension as well as carrying load — keep or measure the original and refit the same thickness unless the workshop manual for your engine tells you to select a different one\n \u003c\/li\u003e\n \u003cli\u003e\n  Refit spacers in the same order and the same positions they came from, and keep them with their own assembly while it is apart\n \u003c\/li\u003e\n \u003cli\u003e\n  Check both faces for wear, dishing, burrs and fretting marks, and fit a new washer if the faces are no longer flat and parallel\n \u003c\/li\u003e\n \u003cli\u003e\n  Make sure the seating faces are clean before assembly; grit or old sealant under a spacer changes the very clearance it is there to set\n \u003c\/li\u003e\n \u003cli\u003e\n  Where the spacer sets an endfloat or a clearance, measure that clearance after assembly against the manual figure rather than assuming it\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 📦 Condition\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Genuine Volvo Penta part\n \u003c\/li\u003e\n \u003cli\u003e\n  Brand new\n \u003c\/li\u003e\n \u003cli\u003e\n  Supplied in original or equivalent packaging\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔎 Full Model Compatibility\n\u003c\/h2\u003e\n\u003cp\u003e\n Typically suits:\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Volvo Penta TAMD74P-A, TAMD74P-B, TAMD74A, TAMD74C-A, TAMD74C-B, TAMD74L-A, TAMD74L-B\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAMD63L-A, TAMD63P-A\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAMD72P-A, TAMD72WJ-A\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAMD73P-A, TAMD73WJ-A\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TWD740GE, TWD740VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD730G\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD740GE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD741GE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAMD71B\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAMD75P-A\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TD610G\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TD710G\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TWD610G\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TWD710G\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Volvo Penta","offers":[{"title":"Default Title","offer_id":53380994859300,"sku":"N642556","price":14.17,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8115\/7924\/files\/original_6767a031-54ec-415a-8360-133da4bfa865.jpg?v=1777127938","url":"https:\/\/www.sawleysautoandmarine.com.au\/products\/1560272-spacer-washer-genuine-volvo-penta","provider":"Sawley's Auto and Marine","version":"1.0","type":"link"}