{"product_id":"1677350-shim-genuine-volvo-penta","title":"1677350 Shim | Genuine Volvo Penta Part","description":"\u003ch2\u003e\n 🔧 Product Description\n\u003c\/h2\u003e\n\u003cp\u003e\n This genuine Volvo Penta shim is a calibrated valve-clearance shim used in the exhaust-valve clearance adjustment. It is manufactured to the original Volvo dimensional, material and interface requirements so the serviced assembly retains its designed alignment, sealing, load capacity and operating reliability. Calibrated shim thickness: 3.05 mm. In service, it sets exhaust-valve clearance by providing a calibrated 3.05 mm thickness at the designated valve-train position. Selection must be confirmed by OEM part number 1677350, the exact engine\/product model, serial number and the installed assembly configuration.\n\u003c\/p\u003e\n\u003ch2\u003e\n 🚤 Compatibility\n\u003c\/h2\u003e\n\u003cp\u003e\n Typically suits:\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Volvo Penta TAD1353GE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1350GE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1351GE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1352GE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1354GE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1355GE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1170-72VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1140-42VE\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Engine Family:\n  \u003c\/strong\u003e\n  TAD\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n ⚙️ Key Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Genuine Volvo Penta OEM part number 1677350\n \u003c\/li\u003e\n \u003cli\u003e\n  Thickness: 3.05 mm\n \u003c\/li\u003e\n \u003cli\u003e\n  System group: Engine\n \u003c\/li\u003e\n \u003cli\u003e\n  Net weight: 0.045 kg\n \u003c\/li\u003e\n \u003cli\u003e\n  Fits TAD1350GE-TAD1355GE, TAD1140-42VE and TAD1170-72VE diesel engines\n \u003c\/li\u003e\n \u003cli\u003e\n  Thickness-specific item - selection depends on the measured clearance\n \u003c\/li\u003e\n \u003cli\u003e\n  TH=3.05mm (Volvo assembly listing)\n \u003c\/li\u003e\n \u003cli\u003e\n  6 used per assembly\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔌 Function\n\u003c\/h2\u003e\n\u003cp\u003e\n The shim acts as a precision spacer that adjusts the gap or preload between two assembled engine components. Selecting the correct thickness brings the clearance back into the specified tolerance during assembly or overhaul.\n\u003c\/p\u003e\n\u003ch2\u003e\n ⚠️ Common Signs of Failure\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Measured clearance outside the specified tolerance during assembly or inspection\n \u003c\/li\u003e\n \u003cli\u003e\n  Abnormal noise, knocking or tapping from the affected assembly\n \u003c\/li\u003e\n \u003cli\u003e\n  Visible wear, scoring, pitting or distortion on the shim faces\n \u003c\/li\u003e\n \u003cli\u003e\n  Accelerated wear on the mating components caused by incorrect preload\n \u003c\/li\u003e\n \u003cli\u003e\n  Repeated loosening or movement of the shimmed assembly in service\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🛠️ Service Notes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Shims are supplied in graded thicknesses and exist to bring a setting into specification, so measure with a micrometer and select the thickness the setting procedure for your engine calls for rather than matching one by eye\n \u003c\/li\u003e\n \u003cli\u003e\n  Note which shim came from which position on removal and keep them identified — once an assembly has bedded in, shims are not interchangeable between positions\n \u003c\/li\u003e\n \u003cli\u003e\n  Check both faces are clean, flat and free of burrs, corrosion and old sealant before fitting; dirt trapped under a shim shifts the setting as surely as the wrong thickness does\n \u003c\/li\u003e\n \u003cli\u003e\n  Discard any shim that is dished, cracked, pitted or fretted rather than reusing it, and make sure no old shim has been left behind in the recess\n \u003c\/li\u003e\n \u003cli\u003e\n  Recheck the clearance or setting after the assembly is tightened down, because clamping load can change the measurement you took loose\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 📦 Condition\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Genuine Volvo Penta part\n \u003c\/li\u003e\n \u003cli\u003e\n  Brand new\n \u003c\/li\u003e\n \u003cli\u003e\n  Supplied in original or equivalent packaging\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Volvo Penta","offers":[{"title":"Default Title","offer_id":53379571319076,"sku":"940063Y","price":22.07,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8115\/7924\/files\/original_48a59355-1932-4919-ba20-fcd3c847adb4.jpg?v=1788054497","url":"https:\/\/www.sawleysautoandmarine.com.au\/products\/1677350-shim-genuine-volvo-penta","provider":"Sawley's Auto and Marine","version":"1.0","type":"link"}