{"product_id":"17496978-sealing-kit-genuine-volvo-penta","title":"17496978 Sealing Kit | Genuine Volvo Penta Part","description":"\u003ch2\u003e\n 🔧 Product Description\n\u003c\/h2\u003e\n\u003cp\u003e\n Genuine Volvo Penta sealing kit for marine propulsion, supplying the matched set of seals needed to service the assembly it serves. It is listed for D-series, IPS and DPI drive installations. Using the kit ensures all related seals are renewed together rather than individually.\n\u003c\/p\u003e\n\u003ch2\u003e\n 🚤 Compatibility\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Engine Family:\n  \u003c\/strong\u003e\n  D, IPS, DPI\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   HP Range:\n  \u003c\/strong\u003e\n  150-440 HP\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Year Range:\n  \u003c\/strong\u003e\n  Approximately 2006 onward, dependent on machine model\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n Full model list at the end of this description.\n\u003c\/p\u003e\n\u003ch2\u003e\n ⚙️ Key Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  OEM selector-valve sealing package\n \u003c\/li\u003e\n \u003cli\u003e\n  Replaces earlier reference 15089650\n \u003c\/li\u003e\n \u003cli\u003e\n  Contains the elastomer seals required for one valve service\n \u003c\/li\u003e\n \u003cli\u003e\n  Used across Volvo powershift transmission control systems\n \u003c\/li\u003e\n \u003cli\u003e\n  Cross-referenced by established heavy-equipment aftermarket suppliers\n \u003c\/li\u003e\n \u003cli\u003e\n  Engine type: Volvo Construction Equipment powershift transmission control valve\n \u003c\/li\u003e\n \u003cli\u003e\n  2 used per assembly\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 📋 Kit Contents\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  4 x elastomer sealing rings \/ O-rings - each supplied only within Volvo kit 17496978 and not assigned a separate public Volvo service number\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔌 Function\n\u003c\/h2\u003e\n\u003cp\u003e\n The sealing kit groups the seals required for a specific service operation into one supply item, so matched sealing components are renewed together. This avoids reusing a fatigued seal alongside new ones.\n\u003c\/p\u003e\n\u003ch2\u003e\n ⚠️ Common Signs of Failure\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Leakage after a partial repair using reused seals\n \u003c\/li\u003e\n \u003cli\u003e\n  Hardened, flattened or cracked seals found during strip-down\n \u003c\/li\u003e\n \u003cli\u003e\n  Water ingress or fluid loss from the assembly\n \u003c\/li\u003e\n \u003cli\u003e\n  Repeat sealing faults shortly after a previous service\n \u003c\/li\u003e\n \u003cli\u003e\n  Contamination found inside the assembly\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🛠️ Service Notes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Fit every item in the kit at the same time; the kit is made up for one job and reusing an old seal alongside new ones is where leaks come back from\n \u003c\/li\u003e\n \u003cli\u003e\n  Clean and dry the sealing faces and grooves completely, taking off old gasket and sealant without scoring the metal\n \u003c\/li\u003e\n \u003cli\u003e\n  Inspect the shaft or bore each seal has to run on — a scored or corroded running surface will cut a new seal straight away\n \u003c\/li\u003e\n \u003cli\u003e\n  Lightly lubricate O-rings and lip seals with clean fluid of the type the system carries, and fit lip seals square with the lip facing the same way as the original\n \u003c\/li\u003e\n \u003cli\u003e\n  Assemble and tighten in the order and to the figures in the workshop manual for your engine, then pressure-test or run up and check for weeps\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔄 Supersession \u0026amp; Cross Reference\n\u003c\/h2\u003e\n\u003ch3\u003e\n OEM Supersession Chain\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  17496978 → Supersedes \/ replaces 15089650\n \u003c\/li\u003e\n \u003cli\u003e\n  15089650 earlier Volvo sealing-kit reference\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n OEM \/ Related Numbers\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  15089650 related reference\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n Other-Brand OEM Numbers\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  VOE17496978\n \u003c\/li\u003e\n \u003cli\u003e\n  VOE15089650\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n Aftermarket \/ Verified Equivalents\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  SRP: SK-96978\n \u003c\/li\u003e\n \u003cli\u003e\n  SLP: ORK-650\n \u003c\/li\u003e\n \u003cli\u003e\n  Olsson Parts: 52747\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 📦 Condition\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Genuine Volvo Penta part\n \u003c\/li\u003e\n \u003cli\u003e\n  Brand new\n \u003c\/li\u003e\n \u003cli\u003e\n  Supplied in original or equivalent packaging\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔎 Full Model Compatibility\n\u003c\/h2\u003e\n\u003cp\u003e\n Typically suits:\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Volvo Penta D13C2-B MP, D13C2-A MP, D13C4-A MP, D13B-L MP, D13B-G MP, D13B-K MP, D13B-C MP, D13C6-A MP, D13C4-B MP, D13C5-B MP, D13C5-A MP, D13C7-B MP, D13C8-B MP\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta D11C2-A MP, D11C4-A MP, D11B2-A MP, D11A-D MP, D11A-E MP\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta D4-150A-G, D4-230A-G, D4-270A-G, D4-320A-G, D4-300A-G\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta D6-300A-G, D6-340A-G, D6-380A-G, D6-400A-G, D6-440A-G\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta IPS3-C, IPS3-A\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta IPS30-E, IPS30-D\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta D8A4-A MP\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta DPI-A\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta IPS2-B\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta IPS20-E\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Volvo Penta","offers":[{"title":"Default Title","offer_id":53380018307364,"sku":"210394C","price":70.8,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8115\/7924\/files\/original_2ff2dd5f-b06e-4bbb-94af-558613e4bccd.jpg?v=1788059400","url":"https:\/\/www.sawleysautoandmarine.com.au\/products\/17496978-sealing-kit-genuine-volvo-penta","provider":"Sawley's Auto and Marine","version":"1.0","type":"link"}