{"product_id":"184526-ball-bearing-genuine-volvo-penta","title":"184526 Ball Bearing | Genuine Volvo Penta Part","description":"\u003ch2\u003e\n 🔧 Product Description\n\u003c\/h2\u003e\n\u003cp\u003e\n This genuine Volvo Penta ball bearing is a precision rolling-element or raceway component used in the engine coolant-pump shaft ball-bearing position. It is manufactured to the original Volvo dimensional, material and interface requirements so the serviced assembly retains its designed alignment, sealing, load capacity and operating reliability. In service, it supports the coolant-pump shaft and maintains impeller and seal alignment. Selection must be confirmed by OEM part number 184526, the exact engine\/product model, serial number and installed configuration.\n\u003c\/p\u003e\n\u003ch2\u003e\n 🚤 Compatibility\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Engine Family:\n  \u003c\/strong\u003e\n  TWD, TID, TD, TAMD, TAD\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n Full model list at the end of this description.\n\u003c\/p\u003e\n\u003ch2\u003e\n ⚙️ Key Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  OEM Volvo Penta part number 184526\n \u003c\/li\u003e\n \u003cli\u003e\n  Net weight 0.161 kg\n \u003c\/li\u003e\n \u003cli\u003e\n  Listed for 24 engine applications\n \u003c\/li\u003e\n \u003cli\u003e\n  Fits TWD, TID, TD, TAMD and TAD series marine diesel engines\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔌 Function\n\u003c\/h2\u003e\n\u003cp\u003e\n Supports the coolant-pump shaft and maintains impeller and seal alignment. Measure shaft and housing fits, renew contaminated lubricant and related seals, and install using force only through the race being fitted. Set preload or end float to the applicable Volvo Penta specification.\n\u003c\/p\u003e\n\u003ch2\u003e\n ⚠️ Common Signs of Failure\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Rumbling or whining tracking shaft speed\n \u003c\/li\u003e\n \u003cli\u003e\n  Radial play at the shaft\n \u003c\/li\u003e\n \u003cli\u003e\n  Rough or notchy rotation by hand\n \u003c\/li\u003e\n \u003cli\u003e\n  Excess heat at the bearing housing\n \u003c\/li\u003e\n \u003cli\u003e\n  Bright metal particles in the oil\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🛠️ Service Notes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Work clean — leave the bearing in its wrapping until the moment it goes in, and do not wash the preservative out or blow it dry with compressed air\n \u003c\/li\u003e\n \u003cli\u003e\n  Apply the fitting force only to the ring being fitted, through a tube or drift that bears on that ring alone; force pushed through the balls from one ring to the other dents the raceways and the bearing will be noisy and short-lived from the first run\n \u003c\/li\u003e\n \u003cli\u003e\n  Where the fit calls for it, expand the inner ring with even, controlled heat rather than driving it on, and never heat a bearing with a flame or beyond the temperature given in the workshop manual for your engine\n \u003c\/li\u003e\n \u003cli\u003e\n  Check the shaft and housing seats before fitting — scoring, burrs, corrosion or a worn seat will ruin a new bearing, and fretting marks mean the seat itself needs attention\n \u003c\/li\u003e\n \u003cli\u003e\n  Fit the bearing square and fully home against its shoulder, note which way round any sealed, shielded or marked face must go, and lubricate with the grease or oil specified for the application before it is turned under load\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔄 Supersession \u0026amp; Cross Reference\n\u003c\/h2\u003e\n\u003ch3\u003e\n OEM \/ Related Numbers\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  8149980 coolant pump\n \u003c\/li\u003e\n \u003cli\u003e\n  1543906 related bearing\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 📦 Condition\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Genuine Volvo Penta part\n \u003c\/li\u003e\n \u003cli\u003e\n  Brand new\n \u003c\/li\u003e\n \u003cli\u003e\n  Supplied in original or equivalent packaging\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔎 Full Model Compatibility\n\u003c\/h2\u003e\n\u003cp\u003e\n Typically suits:\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Volvo Penta TAMD162C-C, TAMD162A, TAMD162B, TAMD162C, TAMD162C-B\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1630G, TAD1630GE, TAD1630P, TAD1630PB\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TID162AG, TID162AGP, TID162AP, TID162APB\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TWD1630G, TWD1630P, TWD1630PP\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1631GE, TAD1631G\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAMD163A-A, TAMD163P-A\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAMD165A, TAMD165C\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TD164KAE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TWD1620G\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Volvo Penta","offers":[{"title":"Default Title","offer_id":53379837755684,"sku":"453298R","price":246.62,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8115\/7924\/files\/original_fd084a19-1fb1-4ebb-bee8-f6e388371297.jpg?v=1788055163","url":"https:\/\/www.sawleysautoandmarine.com.au\/products\/184526-ball-bearing-genuine-volvo-penta","provider":"Sawley's Auto and Marine","version":"1.0","type":"link"}