{"product_id":"184708-ball-bearing-genuine-volvo-penta","title":"184708 Ball Bearing | Genuine Volvo Penta Part","description":"\u003ch2\u003e\n 🔧 Product Description\n\u003c\/h2\u003e\n\u003cp\u003e\n This genuine Volvo Penta ball bearing is a precision ball bearing engineered to support a rotating shaft with low friction and controlled radial alignment used in the fuel-injection-pump coupling and drive support. It is manufactured to the original Volvo Penta dimensional, material and interface requirements so the serviced assembly retains its designed alignment, sealing, load capacity and operating reliability. In service, it supports the injection-pump coupling shaft so pump timing and drive alignment remain stable at engine speed. Selection must be confirmed by OEM part number 184708, the exact engine or product model, serial number and installed configuration.\n\u003c\/p\u003e\n\u003ch2\u003e\n 🚤 Compatibility\n\u003c\/h2\u003e\n\u003cp\u003e\n Typically suits:\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Volvo Penta TWD1620G\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TWD1630G\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TWD1630P\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TWD1630V\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TID162AG\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TID162AGP\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TID162AP\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TID162APB\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAMD162C-C\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAMD162A\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAMD162B\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAMD162C\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAMD162C-B\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1630G\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1630GE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1630P\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAMD163A-A\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAMD165A\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAMD165C\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Engine Family:\n  \u003c\/strong\u003e\n  TWD, TID, TAMD, TAD\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n ⚙️ Key Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  OEM Volvo Penta part number 184708\n \u003c\/li\u003e\n \u003cli\u003e\n  Net weight 0.569 kg - larger-section bearing\n \u003c\/li\u003e\n \u003cli\u003e\n  Listed for 19 engine applications\n \u003c\/li\u003e\n \u003cli\u003e\n  Fits TWD, TID, TAMD and TAD series marine diesel engines\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔌 Function\n\u003c\/h2\u003e\n\u003cp\u003e\n Supports the injection-pump coupling shaft so pump timing and drive alignment remain stable at engine speed. Use the correct press tools and support the loaded race during installation; verify shaft fit, housing fit, lubrication and any specified end-float setting.\n\u003c\/p\u003e\n\u003ch2\u003e\n ⚠️ Common Signs of Failure\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Rumbling or growling that increases under load\n \u003c\/li\u003e\n \u003cli\u003e\n  Measurable shaft play or run-out\n \u003c\/li\u003e\n \u003cli\u003e\n  Rough or heavy drag when rotated by hand\n \u003c\/li\u003e\n \u003cli\u003e\n  Heat discolouration of the races\n \u003c\/li\u003e\n \u003cli\u003e\n  Metal particles in the oil\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🛠️ Service Notes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Work clean — leave the bearing in its wrapping until the moment it goes in, and do not wash the preservative out or blow it dry with compressed air\n \u003c\/li\u003e\n \u003cli\u003e\n  Apply the fitting force only to the ring being fitted, through a tube or drift that bears on that ring alone; force pushed through the balls from one ring to the other dents the raceways and the bearing will be noisy and short-lived from the first run\n \u003c\/li\u003e\n \u003cli\u003e\n  Where the fit calls for it, expand the inner ring with even, controlled heat rather than driving it on, and never heat a bearing with a flame or beyond the temperature given in the workshop manual for your engine\n \u003c\/li\u003e\n \u003cli\u003e\n  Check the shaft and housing seats before fitting — scoring, burrs, corrosion or a worn seat will ruin a new bearing, and fretting marks mean the seat itself needs attention\n \u003c\/li\u003e\n \u003cli\u003e\n  Fit the bearing square and fully home against its shoulder, note which way round any sealed, shielded or marked face must go, and lubricate with the grease or oil specified for the application before it is turned under load\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔄 Supersession \u0026amp; Cross Reference\n\u003c\/h2\u003e\n\u003ch3\u003e\n OEM \/ Related Numbers\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1543447 gear\n \u003c\/li\u003e\n \u003cli\u003e\n  1543975 flange\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 📦 Condition\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Genuine Volvo Penta part\n \u003c\/li\u003e\n \u003cli\u003e\n  Brand new\n \u003c\/li\u003e\n \u003cli\u003e\n  Supplied in original or equivalent packaging\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Volvo Penta","offers":[{"title":"Default Title","offer_id":53385607282980,"sku":"M885982","price":254.29,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8115\/7924\/files\/original_60007f65-3338-49f2-bbd8-67f13607b665.jpg?v=1777197417","url":"https:\/\/www.sawleysautoandmarine.com.au\/products\/184708-ball-bearing-genuine-volvo-penta","provider":"Sawley's Auto and Marine","version":"1.0","type":"link"}