{"product_id":"20492337-v-belt-genuine-volvo-penta","title":"20492337 V-Belt | Genuine Volvo Penta Part","description":"\u003ch2\u003e\n 🔧 Product Description\n\u003c\/h2\u003e\n\u003cp\u003e\n 1325 mm V-belt used in the specified TAD520VE\/TAD721VE cooling-fan bracket arrangement. Application note: 20492337 is the 1325 mm belt used in the specified fan-bracket configuration; verify fan height and engine serial before ordering.\n\u003c\/p\u003e\n\u003ch2\u003e\n 🚤 Compatibility\n\u003c\/h2\u003e\n\u003cp\u003e\n Typically suits:\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Volvo Penta TAD720VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD721VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD722VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD520VE\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Engine Family:\n  \u003c\/strong\u003e\n  TAD\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   HP Range:\n  \u003c\/strong\u003e\n  Approximately 300 HP\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Year Range:\n  \u003c\/strong\u003e\n  Approximately late 1990s-2010s, depending on engine and installation\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n ⚙️ Key Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Correct OEM belt section and effective length for the specified pulley arrangement\n \u003c\/li\u003e\n \u003cli\u003e\n  Transfers accessory or cooling-fan drive without altering pulley alignment\n \u003c\/li\u003e\n \u003cli\u003e\n  Designed for continuous engine-bay heat and cyclic loading\n \u003c\/li\u003e\n \u003cli\u003e\n  Suitable for scheduled maintenance or replacement of cracked, glazed or stretched belts\n \u003c\/li\u003e\n \u003cli\u003e\n  Must be matched to the fitted fan, pulley and tensioner configuration\n \u003c\/li\u003e\n \u003cli\u003e\n  Engine type: Volvo Penta turbocharged diesel engine\n \u003c\/li\u003e\n \u003cli\u003e\n  L=1325mm (Volvo assembly listing)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔌 Function\n\u003c\/h2\u003e\n\u003cp\u003e\n Transfers crankshaft or auxiliary drive to the cooling fan, alternator, compressor or other accessory at the required pulley ratio.\n\u003c\/p\u003e\n\u003ch2\u003e\n ⚠️ Common Signs of Failure\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Cracking, fraying, glazing, delamination or missing belt material\n \u003c\/li\u003e\n \u003cli\u003e\n  Belt squeal, chirping, slip or visible flutter\n \u003c\/li\u003e\n \u003cli\u003e\n  Belt riding incorrectly in the pulley groove or wearing one edge\n \u003c\/li\u003e\n \u003cli\u003e\n  Reduced alternator output, cooling airflow or accessory performance\n \u003c\/li\u003e\n \u003cli\u003e\n  Repeated belt failure caused by pulley misalignment or incorrect tension\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🛠️ Service Notes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Slack the tensioner or adjuster right off and roll the belt onto the pulleys by hand; levering a belt over a pulley flange with a screwdriver breaks the cords in the belt side walls\n \u003c\/li\u003e\n \u003cli\u003e\n  Check the pulley grooves are clean and unworn before fitting — a groove with a polished, glazed bottom or a worn shoulder will not grip a new belt and will chew it up\n \u003c\/li\u003e\n \u003cli\u003e\n  Check pulley alignment and the condition of the tensioner, idler and their bearings while the belt is off\n \u003c\/li\u003e\n \u003cli\u003e\n  Tension the belt by the method and to the deflection given in the workshop manual for your engine, then run the engine, stop it and re-check; a new belt beds in and loses tension quickly\n \u003c\/li\u003e\n \u003cli\u003e\n  Where two or more belts drive together, renew them as a matched set so the load stays shared\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔄 Supersession \u0026amp; Cross Reference\n\u003c\/h2\u003e\n\u003ch3\u003e\n OEM \/ Related Numbers\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  21142055 belt tensioner\n \u003c\/li\u003e\n \u003cli\u003e\n  20460204 pulley\n \u003c\/li\u003e\n \u003cli\u003e\n  21425463 later pulley\n \u003c\/li\u003e\n \u003cli\u003e\n  20405724 six-point screw\n \u003c\/li\u003e\n \u003cli\u003e\n  20492337 belt length: 1325 mm\n \u003c\/li\u003e\n \u003cli\u003e\n  20492339 belt length: 1025 mm\n \u003c\/li\u003e\n \u003cli\u003e\n  20492540 belt length: 1175 mm\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 📦 Condition\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Genuine Volvo Penta part\n \u003c\/li\u003e\n \u003cli\u003e\n  Brand new\n \u003c\/li\u003e\n \u003cli\u003e\n  Supplied in original or equivalent packaging\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Volvo Penta","offers":[{"title":"Default Title","offer_id":53385580314916,"sku":"1404383","price":69.64,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8115\/7924\/files\/original_498df153-d670-4d8e-aa0b-4390f694e335.jpg?v=1788060122","url":"https:\/\/www.sawleysautoandmarine.com.au\/products\/20492337-v-belt-genuine-volvo-penta","provider":"Sawley's Auto and Marine","version":"1.0","type":"link"}