{"product_id":"20553463-sensor-genuine-volvo-penta","title":"20553463 Sensor | Genuine Volvo Penta Part","description":"\u003ch2\u003e\n 🔧 Product Description\n\u003c\/h2\u003e\n\u003cp\u003e\n This genuine Volvo Penta sensor is an OEM service component used in the Charge-Air Pressure \/ Temperature and Air-Filter Monitoring Sensor. It is manufactured to the original Volvo Penta dimensional, material and interface requirements for the documented Volvo Penta D5A\/D7C industrial diesel application. Technical identification: Combined charge-air pressure\/temperature sensor used in the intake-monitoring circuit; documented service-temperature range approximately -40°C to +120°C. In service, it measures the specified engine speed, position, pressure or temperature condition and sends the corresponding signal to the instrument or engine-control system. Selection must be confirmed by OEM part number 20553463, the exact model\/product number, serial number and installed assembly configuration.\n\u003c\/p\u003e\n\u003ch2\u003e\n 🚤 Compatibility\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Engine Family:\n  \u003c\/strong\u003e\n  D, TD, TAD, MD\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n Full model list at the end of this description.\n\u003c\/p\u003e\n\u003ch2\u003e\n ⚙️ Key Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Genuine Volvo Penta OEM sensor\n \u003c\/li\u003e\n \u003cli\u003e\n  OEM part number 20553463\n \u003c\/li\u003e\n \u003cli\u003e\n  Technical distinction: Combined charge-air pressure\/temperature sensor used in the intake-monitoring circuit; documented service-temperature range approximately -40°C to +120°C\n \u003c\/li\u003e\n \u003cli\u003e\n  Inspect the connector and target\/port, install to the specified depth and torque, then verify live-data response and stored fault codes.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔌 Function\n\u003c\/h2\u003e\n\u003cp\u003e\n Measures the specified engine speed, position, pressure or temperature condition and sends the corresponding signal to the instrument or engine-control system. Inspect the connector and target\/port, install to the specified depth and torque, then verify live-data response and stored fault codes.\n\u003c\/p\u003e\n\u003ch2\u003e\n ⚠️ Common Signs of Failure\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Fault codes, alarms or an implausible live-data\/instrument reading\n \u003c\/li\u003e\n \u003cli\u003e\n  Intermittent signal loss caused by vibration, heat or connector movement\n \u003c\/li\u003e\n \u003cli\u003e\n  Poor starting, derating or unstable engine control\n \u003c\/li\u003e\n \u003cli\u003e\n  Open circuit, short circuit or out-of-range resistance\/voltage\n \u003c\/li\u003e\n \u003cli\u003e\n  Corroded terminals, damaged wiring or a cracked sensor body\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🛠️ Service Notes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Note how the sensor sits and how its lead is routed before removing it, and support the harness so refitting does not leave the cable strained or rubbing\n \u003c\/li\u003e\n \u003cli\u003e\n  Turn the sensor with a spanner on its hex only — never lever or twist it by the connector body or the wiring, which breaks the internal joint even when the sensor looks undamaged\n \u003c\/li\u003e\n \u003cli\u003e\n  Renew the O-ring or sealing washer where one is fitted, and do not add thread sealant unless the manual for your engine specifies it; sealant on the threads can break the earth path of a sensor that earths through its body\n \u003c\/li\u003e\n \u003cli\u003e\n  Tighten to the figure in the workshop manual for your engine — overtightening distorts the housing and shifts or destroys the sensing element\n \u003c\/li\u003e\n \u003cli\u003e\n  Make sure the connector is clean, dry and fully latched home and check the pins for corrosion and spread — a poor connector accounts for a great many faults blamed on the sensor — then run the engine and confirm the reading or warning lamp behaves sensibly before returning the boat to service\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔄 Supersession \u0026amp; Cross Reference\n\u003c\/h2\u003e\n\u003ch3\u003e\n OEM Supersession Chain\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  20553463 → Supersedes 20451286\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n OEM \/ Related Numbers\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  20451286 earlier number superseded by this part\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n Other-Brand OEM Numbers\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Deutz: 04214103\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n Aftermarket \/ Verified Equivalents\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Hi-TTS: 4214103\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 📦 Condition\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Genuine Volvo Penta part\n \u003c\/li\u003e\n \u003cli\u003e\n  Brand new\n \u003c\/li\u003e\n \u003cli\u003e\n  Supplied in original or equivalent packaging\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔎 Full Model Compatibility\n\u003c\/h2\u003e\n\u003cp\u003e\n Typically suits:\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Volvo Penta D7A-B TA, D7A-T, D7A-TA, D7C-B TA, D7C-TA\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta D5A-B TA, D5A-T, D5A-TA\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta MD2010, MD2010B\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD520GE, TAD520VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD530GE MECH, TAD530GE EDC4\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD531GE MECH, TAD531GE EDC4\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD720GE, TAD720VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD721GE, TAD721VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD722GE, TAD722VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD730GE MECH, TAD730GE EDC4\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD731GE MECH, TAD731GE EDC4\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TD520GE, TD520VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TD720GE, TD720VE PP\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD420VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD532GE EDC4\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD550GE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD551GE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD620VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD732GE EDC4\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD733GE EDC4\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TD420VE\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Volvo Penta","offers":[{"title":"Default Title","offer_id":53385618260260,"sku":"G683586","price":120.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8115\/7924\/files\/original_8bd9a478-528d-45b8-9bb2-51566e47a624.jpg?v=1788060971","url":"https:\/\/www.sawleysautoandmarine.com.au\/products\/20553463-sensor-genuine-volvo-penta","provider":"Sawley's Auto and Marine","version":"1.0","type":"link"}