{"product_id":"20706889-sensor-genuine-volvo-penta","title":"20706889 Sensor | Genuine Volvo Penta Part","description":"\u003ch2\u003e\n 🔧 Product Description\n\u003c\/h2\u003e\n\u003cp\u003e\n A genuine combined pressure and temperature sensor used by compatible Volvo Penta D9 and D12 engine-management systems. It measures charge-air or boost pressure together with intake-air temperature and sends both values to the control unit.\n\u003c\/p\u003e\n\u003ch2\u003e\n 🚤 Compatibility\n\u003c\/h2\u003e\n\u003cp\u003e\n Typically suits:\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Volvo Penta TWD1240VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD943VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD952VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD951VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD950VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1241GE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1242GE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1240GE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1241VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1242VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1241-42VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD940GE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD940VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD941VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD941GE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD942VE\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Engine Family:\n  \u003c\/strong\u003e\n  TWD, TAD\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n ⚙️ Key Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Combined boost-pressure and charge-air-temperature measurement\n \u003c\/li\u003e\n \u003cli\u003e\n  Cross-referenced to Volvo numbers 20700060, 20552759, 20478260, 3985650, 20374280 and 3172522\n \u003c\/li\u003e\n \u003cli\u003e\n  Matched sensing range and connector for D9\/D12 EDC systems\n \u003c\/li\u003e\n \u003cli\u003e\n  Supports fuelling, boost control, smoke limitation and engine protection\n \u003c\/li\u003e\n \u003cli\u003e\n  Correct diagnosis requires supply, ground, signal and harness checks\n \u003c\/li\u003e\n \u003cli\u003e\n  Do not substitute a pressure-only sensor with the same connector\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔌 Function\n\u003c\/h2\u003e\n\u003cp\u003e\n Measures intake\/boost pressure and charge-air temperature for engine-control calculations and protection functions.\n\u003c\/p\u003e\n\u003ch2\u003e\n ⚠️ Common Signs of Failure\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Boost or intake-temperature readings are implausible or fixed\n \u003c\/li\u003e\n \u003cli\u003e\n  The engine derates or stores pressure\/temperature faults\n \u003c\/li\u003e\n \u003cli\u003e\n  Power and smoke control become inconsistent\n \u003c\/li\u003e\n \u003cli\u003e\n  The signal drops out with vibration or connector movement\n \u003c\/li\u003e\n \u003cli\u003e\n  Testing shows an open circuit, short circuit or out-of-range output\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🛠️ Service Notes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Note how the sensor sits and how its lead is routed before removing it, and support the harness so refitting does not leave the cable strained or rubbing\n \u003c\/li\u003e\n \u003cli\u003e\n  Turn the sensor with a spanner on its hex only — never lever or twist it by the connector body or the wiring, which breaks the internal joint even when the sensor looks undamaged\n \u003c\/li\u003e\n \u003cli\u003e\n  Renew the O-ring or sealing washer where one is fitted, and do not add thread sealant unless the manual for your engine specifies it; sealant on the threads can break the earth path of a sensor that earths through its body\n \u003c\/li\u003e\n \u003cli\u003e\n  Tighten to the figure in the workshop manual for your engine — overtightening distorts the housing and shifts or destroys the sensing element\n \u003c\/li\u003e\n \u003cli\u003e\n  Make sure the connector is clean, dry and fully latched home and check the pins for corrosion and spread — a poor connector accounts for a great many faults blamed on the sensor — then run the engine and confirm the reading or warning lamp behaves sensibly before returning the boat to service\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔄 Supersession \u0026amp; Cross Reference\n\u003c\/h2\u003e\n\u003ch3\u003e\n OEM Supersession Chain\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  20706889 → Supersedes 20478260 → Supersedes 20374280\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n OEM \/ Related Numbers\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  20478260 earlier number superseded by this part\n \u003c\/li\u003e\n \u003cli\u003e\n  20374280 earlier number superseded by this part\n \u003c\/li\u003e\n \u003cli\u003e\n  20700060 - Related Volvo sensor references\n \u003c\/li\u003e\n \u003cli\u003e\n  20552759 - Related Volvo sensor references\n \u003c\/li\u003e\n \u003cli\u003e\n  3985650 - Additional Volvo cross-references\n \u003c\/li\u003e\n \u003cli\u003e\n  3172522 - Additional Volvo cross-references\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n Aftermarket \/ Verified Equivalents\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Advance Truck Parts: ATP 20700060 \/ 20706889 replacement sensor\n \u003c\/li\u003e\n \u003cli\u003e\n  DT Spare Parts: 2.27172\n \u003c\/li\u003e\n \u003cli\u003e\n  Auger: 74466\n \u003c\/li\u003e\n \u003cli\u003e\n  Cojali: 2260221\n \u003c\/li\u003e\n \u003cli\u003e\n  febi Bilstein: 109336\n \u003c\/li\u003e\n \u003cli\u003e\n  Herth+Buss Elparts: 70670871\n \u003c\/li\u003e\n \u003cli\u003e\n  PE Automotive: 080.945-00A\n \u003c\/li\u003e\n \u003cli\u003e\n  Sampa: 032.371\n \u003c\/li\u003e\n \u003cli\u003e\n  ST-TEMPLIN: 01.050.8716.610\n \u003c\/li\u003e\n \u003cli\u003e\n  Trucktec Automotive: 03.17.021\n \u003c\/li\u003e\n \u003cli\u003e\n  Air Fren: 25.2900.01\n \u003c\/li\u003e\n \u003cli\u003e\n  OSSCA: 47493\n \u003c\/li\u003e\n \u003cli\u003e\n  Casals: 65260\n \u003c\/li\u003e\n \u003cli\u003e\n  Meat \u0026amp; Doria: 825038\n \u003c\/li\u003e\n \u003cli\u003e\n  SIDAT: 84.3181\n \u003c\/li\u003e\n \u003cli\u003e\n  FISPA: 84.3181\n \u003c\/li\u003e\n \u003cli\u003e\n  STELLOX: 88-21805-SX\n \u003c\/li\u003e\n \u003cli\u003e\n  Hoffer: 74725038\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 📦 Condition\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Genuine Volvo Penta part\n \u003c\/li\u003e\n \u003cli\u003e\n  Brand new\n \u003c\/li\u003e\n \u003cli\u003e\n  Supplied in original or equivalent packaging\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Volvo Penta","offers":[{"title":"Default Title","offer_id":53381814747428,"sku":"Y319760","price":679.03,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8115\/7924\/files\/original_734ab34b-c5b4-4791-9312-018542b8ef32.jpg?v=1788055861","url":"https:\/\/www.sawleysautoandmarine.com.au\/products\/20706889-sensor-genuine-volvo-penta","provider":"Sawley's Auto and Marine","version":"1.0","type":"link"}