{"product_id":"20862336-insert-genuine-volvo-penta","title":"20862336 Insert | Genuine Volvo Penta Part","description":"\u003ch2\u003e\n 🔧 Product Description\n\u003c\/h2\u003e\n\u003cp\u003e\n A genuine Volvo Penta insert for the oil-cooler and oil-filter pressure-control assembly. The insert locates and retains the spring\/plunger stack and forms the calibrated seat or passage interface needed for the internal regulating valve to operate predictably.\n\u003c\/p\u003e\n\u003ch2\u003e\n 🚤 Compatibility\n\u003c\/h2\u003e\n\u003cp\u003e\n Typically suits:\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Volvo Penta TAD560VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD561VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD734GE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD752GE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD753GE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD754GE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD765VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD764VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD763VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD762VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD761VE\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Engine Family:\n  \u003c\/strong\u003e\n  TAD\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n ⚙️ Key Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Genuine Volvo Penta Oil Control Valve Insert - part number 20862336\n \u003c\/li\u003e\n \u003cli\u003e\n  Machined insert for the oil-housing control-valve assembly\n \u003c\/li\u003e\n \u003cli\u003e\n  Positions the spring, guide sleeve and plunger at the correct installed depth\n \u003c\/li\u003e\n \u003cli\u003e\n  Provides the original seat, restriction or gallery interface\n \u003c\/li\u003e\n \u003cli\u003e\n  Preserves calibrated plunger travel and spring preload\n \u003c\/li\u003e\n \u003cli\u003e\n  Thread and sealing surfaces match the Volvo Penta housing\n \u003c\/li\u003e\n \u003cli\u003e\n  Inspect the housing bore and replace damaged locking hardware during service\n \u003c\/li\u003e\n \u003cli\u003e\n  Engine type: D5\/D7-series oil-cooler and oil-filter pressure-control systems\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔌 Function\n\u003c\/h2\u003e\n\u003cp\u003e\n The insert closes and locates the regulating-valve bore while establishing the internal geometry against which the plunger and spring operate. Its installed depth directly affects valve travel, spring preload and oil-flow calibration.\n\u003c\/p\u003e\n\u003ch2\u003e\n ⚠️ Common Signs of Failure\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Oil seepage around the insert or its sealing interface\n \u003c\/li\u003e\n \u003cli\u003e\n  Damaged threads or inability to hold specified torque\n \u003c\/li\u003e\n \u003cli\u003e\n  Incorrect installed depth changes oil-pressure behaviour\n \u003c\/li\u003e\n \u003cli\u003e\n  Seat or port erosion causes uncontrolled bypass flow\n \u003c\/li\u003e\n \u003cli\u003e\n  Valve components loosen or move within the housing\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🛠️ Service Notes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Work clean — anything fitted into the fuel side goes in with the seat and the surrounding area free of dirt, and openings kept capped while they are apart\n \u003c\/li\u003e\n \u003cli\u003e\n  Fit new sealing rings, washers or gaskets wherever the original used them, lightly lubricated so they seat without rolling\n \u003c\/li\u003e\n \u003cli\u003e\n  Check the bore or seat the insert fits into for corrosion, scoring or distortion before fitting; an insert seals only as well as the surface it beds on\n \u003c\/li\u003e\n \u003cli\u003e\n  Tighten to the figures and in the order given in the workshop manual for your engine — an insert is easily distorted by overtightening\n \u003c\/li\u003e\n \u003cli\u003e\n  Bleed the fuel system afterwards and check for leaks with the engine running before the boat is used\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔄 Supersession \u0026amp; Cross Reference\n\u003c\/h2\u003e\n\u003ch3\u003e\n Other-Brand OEM Numbers\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  VOE20862336\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 📦 Condition\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Genuine Volvo Penta part\n \u003c\/li\u003e\n \u003cli\u003e\n  Brand new\n \u003c\/li\u003e\n \u003cli\u003e\n  Supplied in original or equivalent packaging\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Volvo Penta","offers":[{"title":"Default Title","offer_id":53385581625636,"sku":"3917581","price":26.51,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8115\/7924\/files\/original_6737af66-c4ea-4f9b-969d-eec43020052f.jpg?v=1777197233","url":"https:\/\/www.sawleysautoandmarine.com.au\/products\/20862336-insert-genuine-volvo-penta","provider":"Sawley's Auto and Marine","version":"1.0","type":"link"}