{"product_id":"21263379-intermediate-lever-genuine-volvo-penta","title":"21263379 Intermediate Lever | Genuine Volvo Penta Part","description":"\u003ch2\u003e\n 🔧 Product Description\n\u003c\/h2\u003e\n\u003cp\u003e\n Genuine intermediate lever used in the mechanical governor and fuel-control system of the Volvo Penta D1-30F marine diesel engine. It is one of several levers in the matched governor assembly and must be installed in the correct pivot position.\n\u003c\/p\u003e\n\u003ch2\u003e\n 🚤 Compatibility\n\u003c\/h2\u003e\n\u003cp\u003e\n Typically suits:\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Volvo Penta D2-40F\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Engine Family:\n  \u003c\/strong\u003e\n  D\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   HP Range:\n  \u003c\/strong\u003e\n  40 HP\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n ⚙️ Key Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Confirmed D1-30F application\n \u003c\/li\u003e\n \u003cli\u003e\n  Mechanical governor linkage lever\n \u003c\/li\u003e\n \u003cli\u003e\n  Factory pivot, length and lever ratio\n \u003c\/li\u003e\n \u003cli\u003e\n  Works with governor 21187328 and the matched shafts and springs\n \u003c\/li\u003e\n \u003cli\u003e\n  Not interchangeable with D1-20F lever 21263359\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔌 Function\n\u003c\/h2\u003e\n\u003cp\u003e\n The lever transfers governor movement to the fuel-control linkage and maintains the calibrated relationship between engine speed and fuel delivery.\n\u003c\/p\u003e\n\u003ch2\u003e\n ⚠️ Common Signs of Failure\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Worn pivot\n \u003c\/li\u003e\n \u003cli\u003e\n  Excessive linkage play\n \u003c\/li\u003e\n \u003cli\u003e\n  Unstable idle\n \u003c\/li\u003e\n \u003cli\u003e\n  Speed hunting under load\n \u003c\/li\u003e\n \u003cli\u003e\n  Failure to return to idle\n \u003c\/li\u003e\n \u003cli\u003e\n  Bent or binding lever\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🛠️ Service Notes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Fit new bushes, pins, clips and split pins where they are supplied or disturbed, and check the pivot holes and pin diameters for wear before assembling — slop in a linkage lever is felt directly at the control\n \u003c\/li\u003e\n \u003cli\u003e\n  Assemble the pivots clean and lubricated as the manual for your engine specifies, and confirm the lever swings freely through its whole arc with no tight spot or binding\n \u003c\/li\u003e\n \u003cli\u003e\n  Set the linkage so full travel at the control produces full travel at the unit it operates, and check that the stops are reached without the lever going over-centre or hitting anything\n \u003c\/li\u003e\n \u003cli\u003e\n  Work through the complete range of movement by hand, watching for fouling against hoses, wiring or structure, and in both directions before running the engine\n \u003c\/li\u003e\n \u003cli\u003e\n  Secure every connection with the correct locking device and recheck the adjustment after the first period of use, since linkages bed in\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔄 Supersession \u0026amp; Cross Reference\n\u003c\/h2\u003e\n\u003ch3\u003e\n OEM Supersession Chain\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  21263379 → Supersedes 21193046\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n OEM \/ Related Numbers\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  21193046 earlier number superseded by this part\n \u003c\/li\u003e\n \u003cli\u003e\n  21187771 - Intermediate lever\n \u003c\/li\u003e\n \u003cli\u003e\n  21189685 - Return spring\n \u003c\/li\u003e\n \u003cli\u003e\n  21187772 - Bracket\n \u003c\/li\u003e\n \u003cli\u003e\n  21189675 - Gasket\n \u003c\/li\u003e\n \u003cli\u003e\n  21192501 - Intermediate lever\n \u003c\/li\u003e\n \u003cli\u003e\n  843109 - Bushing\n \u003c\/li\u003e\n \u003cli\u003e\n  21225495 - Arm\n \u003c\/li\u003e\n \u003cli\u003e\n  21187328 - Governor\n \u003c\/li\u003e\n \u003cli\u003e\n  21187733 - Shafts\n \u003c\/li\u003e\n \u003cli\u003e\n  21187723 - Shafts\n \u003c\/li\u003e\n \u003cli\u003e\n  21189686 - Governor-spring references by application\n \u003c\/li\u003e\n \u003cli\u003e\n  21189687 - Governor-spring references by application\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 📦 Condition\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Genuine Volvo Penta part\n \u003c\/li\u003e\n \u003cli\u003e\n  Brand new\n \u003c\/li\u003e\n \u003cli\u003e\n  Supplied in original or equivalent packaging\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Volvo Penta","offers":[{"title":"Default Title","offer_id":53381548245284,"sku":"607345Q","price":141.17,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8115\/7924\/files\/original_ed36a952-98ee-497b-a483-aca6b728404b.jpg?v=1788057416","url":"https:\/\/www.sawleysautoandmarine.com.au\/products\/21263379-intermediate-lever-genuine-volvo-penta","provider":"Sawley's Auto and Marine","version":"1.0","type":"link"}