{"product_id":"21486081-lip-seal-genuine-volvo-penta","title":"21486081 Lip Seal | Genuine Volvo Penta Part","description":"\u003ch2\u003e\n 🔧 Product Description\n\u003c\/h2\u003e\n\u003cp\u003e\n A radial lip seal used in the oil-pump housing of Volvo Penta TAD7 industrial and generating-set engines.\n\u003c\/p\u003e\n\u003ch2\u003e\n 🚤 Compatibility\n\u003c\/h2\u003e\n\u003cp\u003e\n Typically suits:\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Volvo Penta TAD550GE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD551GE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD560VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD561VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD734GE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD750GE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD751GE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD750VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD752GE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD753GE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD754GE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD760VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD765VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD764VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD763VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD762VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD761VE\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Engine Family:\n  \u003c\/strong\u003e\n  TAD\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Serial Range:\n  \u003c\/strong\u003e\n  SN5310859069-\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n ⚙️ Key Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Oil-resistant sealing lip\n \u003c\/li\u003e\n \u003cli\u003e\n  Correct shaft and housing dimensions\n \u003c\/li\u003e\n \u003cli\u003e\n  Replaces earlier seal 20412568\n \u003c\/li\u003e\n \u003cli\u003e\n  Maintains oil-pump housing sealing\n \u003c\/li\u003e\n \u003cli\u003e\n  Suitable for continuous engine-oil temperature\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔌 Function\n\u003c\/h2\u003e\n\u003cp\u003e\n The seal prevents lubricating oil from escaping around the rotating oil-pump shaft or housing interface.\n\u003c\/p\u003e\n\u003ch2\u003e\n ⚠️ Common Signs of Failure\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Oil leakage at the pump housing\n \u003c\/li\u003e\n \u003cli\u003e\n  Hardened or torn sealing lip\n \u003c\/li\u003e\n \u003cli\u003e\n  Groove worn in the shaft\n \u003c\/li\u003e\n \u003cli\u003e\n  Seal displaced from the bore\n \u003c\/li\u003e\n \u003cli\u003e\n  Low oil level caused by external leakage\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🛠️ Service Notes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Note which way round the old seal sits before you pull it out; a lip seal only holds one way and fitting it reversed guarantees a leak\n \u003c\/li\u003e\n \u003cli\u003e\n  Check the shaft or wear sleeve the seal runs on — a groove worn by the old seal, or any burr, nick or rust in the running band, will cut a new seal straight away\n \u003c\/li\u003e\n \u003cli\u003e\n  Clean the housing bore, then press the seal in square using a drift or tool that bears on the outer face of the seal, never on the lip, and take it to the depth the original sat at\n \u003c\/li\u003e\n \u003cli\u003e\n  Lightly oil or grease the lip and the shaft before assembly so the seal is not run dry on start-up, and keep grit away from the lip\n \u003c\/li\u003e\n \u003cli\u003e\n  Sleeve or tape over splines, keyways, threads and step edges when passing the seal over them, and never lever the lip past an edge with a screwdriver\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔄 Supersession \u0026amp; Cross Reference\n\u003c\/h2\u003e\n\u003ch3\u003e\n OEM Supersession Chain\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  21486081 → Supersedes 20412568 → Supersedes 11700270\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n OEM \/ Related Numbers\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  20412568 earlier number superseded by this part\n \u003c\/li\u003e\n \u003cli\u003e\n  20967241 earlier number superseded by this part\n \u003c\/li\u003e\n \u003cli\u003e\n  20967253 earlier number superseded by this part\n \u003c\/li\u003e\n \u003cli\u003e\n  11700270 earlier number superseded by this part\n \u003c\/li\u003e\n \u003cli\u003e\n  21600207 - Related oil-pump housings\n \u003c\/li\u003e\n \u003cli\u003e\n  21595090 - Related oil-pump housings\n \u003c\/li\u003e\n \u003cli\u003e\n  23171016 - Related service cover\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n Other-Brand OEM Numbers\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Elring: 084.920\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n Aftermarket \/ Verified Equivalents\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  DT Spare Parts: 2.11112\n \u003c\/li\u003e\n \u003cli\u003e\n  Ajusa: 15102800\n \u003c\/li\u003e\n \u003cli\u003e\n  Sampa: 039.022\n \u003c\/li\u003e\n \u003cli\u003e\n  Orion: 503975\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 📦 Condition\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Genuine Volvo Penta part\n \u003c\/li\u003e\n \u003cli\u003e\n  Brand new\n \u003c\/li\u003e\n \u003cli\u003e\n  Supplied in original or equivalent packaging\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Volvo Penta","offers":[{"title":"Default Title","offer_id":53384166113572,"sku":"M735096","price":166.62,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8115\/7924\/files\/original_c2192cdd-15f5-42ba-85bd-60ba7f6352c5.jpg?v=1788061461","url":"https:\/\/www.sawleysautoandmarine.com.au\/products\/21486081-lip-seal-genuine-volvo-penta","provider":"Sawley's Auto and Marine","version":"1.0","type":"link"}