{"product_id":"21662673-bilge-pump-genuine-volvo-penta","title":"21662673 Bilge Pump | Genuine Volvo Penta Part","description":"\u003ch2\u003e\n 🔧 Product Description\n\u003c\/h2\u003e\n\u003cp\u003e\n A genuine Volvo Penta marine bilge pump designed for reliable water removal in the specified manual or electrical installation.\n\u003c\/p\u003e\n\u003ch2\u003e\n ⚙️ Key Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Electrical system: 12V\n \u003c\/li\u003e\n \u003cli\u003e\n  Current draw: approximately 3A\n \u003c\/li\u003e\n \u003cli\u003e\n  Hose connection: 19mm \/ ¾ inch\n \u003c\/li\u003e\n \u003cli\u003e\n  Maximum output: approximately 28L\/min at 1m head and 13.6V\n \u003c\/li\u003e\n \u003cli\u003e\n  Integrated electronic water-level switch with no moving float\n \u003c\/li\u003e\n \u003cli\u003e\n  Recommended fuse: 5A\n \u003c\/li\u003e\n \u003cli\u003e\n  Approximate dimensions: 142 × 82 × 105mm\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔌 Function\n\u003c\/h2\u003e\n\u003cp\u003e\n The integrated sensor automatically starts the submersible pump when bilge water reaches the switching level and stops it after the water is removed.\n\u003c\/p\u003e\n\u003ch2\u003e\n ⚠️ Common Signs of Failure\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Pump runs continuously\n \u003c\/li\u003e\n \u003cli\u003e\n  Pump does not start in water\n \u003c\/li\u003e\n \u003cli\u003e\n  Low discharge flow\n \u003c\/li\u003e\n \u003cli\u003e\n  Electronic sensor fouled\n \u003c\/li\u003e\n \u003cli\u003e\n  Impeller blocked\n \u003c\/li\u003e\n \u003cli\u003e\n  Blown fuse or corroded wiring\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🛠️ Service Notes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Mount the pump at the lowest point of the bilge where it will actually pick up, sitting level and secured so it cannot topple or shift at sea, and keep it clear of debris that would jam the impeller\n \u003c\/li\u003e\n \u003cli\u003e\n  Take the discharge hose up to a loop above the waterline before it turns down to the outlet so the sea cannot siphon back into the boat, and clamp the hose properly at both ends\n \u003c\/li\u003e\n \u003cli\u003e\n  Wire the pump on its own protected circuit with cable sized for the length of the run, and make every connection above the level bilge water can reach, using proper waterproof joints rather than tape\n \u003c\/li\u003e\n \u003cli\u003e\n  Test the pump and its float or sensing switch by filling the bilge and watching it lift, run and cut out, and repeat the test at the start of each season\n \u003c\/li\u003e\n \u003cli\u003e\n  Treat it as a nuisance-water pump rather than damage control — keep the strainer clear and the bilge dry enough that a new leak would be obvious\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔄 Supersession \u0026amp; Cross Reference\n\u003c\/h2\u003e\n\u003ch3\u003e\n OEM Supersession Chain\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  21662673 → Supersedes 41103004\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n OEM \/ Related Numbers\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  41103004 earlier number superseded by this part\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 📦 Condition\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Genuine Volvo Penta part\n \u003c\/li\u003e\n \u003cli\u003e\n  Brand new\n \u003c\/li\u003e\n \u003cli\u003e\n  Supplied in original or equivalent packaging\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Volvo Penta","offers":[{"title":"Default Title","offer_id":53379770515748,"sku":"9533158","price":298.03,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8115\/7924\/files\/original_c0d6359c-2da1-4226-a795-e140260d449f.jpg?v=1788057712","url":"https:\/\/www.sawleysautoandmarine.com.au\/products\/21662673-bilge-pump-genuine-volvo-penta","provider":"Sawley's Auto and Marine","version":"1.0","type":"link"}