{"product_id":"21675637-hose-genuine-volvo-penta","title":"21675637 Hose | Genuine Volvo Penta Part","description":"\u003ch2\u003e\n 🔧 Product Description\n\u003c\/h2\u003e\n\u003cp\u003e\n A genuine moulded hose used as schematic item 11 in the inlet and exhaust system on Volvo Penta D6 F- and E-generation marine engines. It forms part of the air-filter, breather or non-return-valve hose arrangement and is separately shaped from the adjoining hose.\n\u003c\/p\u003e\n\u003ch2\u003e\n 🚤 Compatibility\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Engine Family:\n  \u003c\/strong\u003e\n  D\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   HP Range:\n  \u003c\/strong\u003e\n  180-435 HP\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Year Range:\n  \u003c\/strong\u003e\n  Approximately 2008 - 2016\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n Full model list at the end of this description.\n\u003c\/p\u003e\n\u003ch2\u003e\n ⚙️ Key Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Genuine Volvo Penta moulded inlet-system hose\n \u003c\/li\u003e\n \u003cli\u003e\n  Factory bend, bore and length\n \u003c\/li\u003e\n \u003cli\u003e\n  Used with the specified filter and non-return valve arrangement\n \u003c\/li\u003e\n \u003cli\u003e\n  Resistant to oil mist and engine-room heat\n \u003c\/li\u003e\n \u003cli\u003e\n  Direct replacement for a split or hardened original hose\n \u003c\/li\u003e\n \u003cli\u003e\n  Engine type: 5.5L inline six-cylinder common-rail turbocharged marine diesel\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔌 Function\n\u003c\/h2\u003e\n\u003cp\u003e\n Carries filtered air or crankcase-ventilation flow through the inlet-system filter and non-return-valve arrangement.\n\u003c\/p\u003e\n\u003ch2\u003e\n ⚠️ Common Signs of Failure\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Air or oil-mist leakage\n \u003c\/li\u003e\n \u003cli\u003e\n  Hose cracking, hardening or collapse\n \u003c\/li\u003e\n \u003cli\u003e\n  Loose clamps\n \u003c\/li\u003e\n \u003cli\u003e\n  Unfiltered-air entry\n \u003c\/li\u003e\n \u003cli\u003e\n  Restricted ventilation or intake flow\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🛠️ Service Notes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Fit hoses only to clean, sound spigots — take off old rubber, scale and corrosion, and renew the spigot or pipe if it is pitted, because no clamp will seal a rough sealing face\n \u003c\/li\u003e\n \u003cli\u003e\n  Push the hose fully home so the clamp sits behind the bead or barb rather than over the end of the spigot, and fit new clamps whenever a hose is renewed\n \u003c\/li\u003e\n \u003cli\u003e\n  Let the hose follow its natural bend with no kinks and no tension on either connection, clear of hot surfaces and moving parts, with chafe protection wherever it passes a bracket, edge or bulkhead\n \u003c\/li\u003e\n \u003cli\u003e\n  Use the correct grade of hose for the duty, and clamp to the standard the installation demands — twin clamps are normal practice on seawater and fuel connections below the waterline\n \u003c\/li\u003e\n \u003cli\u003e\n  Refill, vent and run the engine, then check every joint hot and cold and recheck the clamps after the first running period as the hose beds down\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔄 Supersession \u0026amp; Cross Reference\n\u003c\/h2\u003e\n\u003ch3\u003e\n OEM Supersession Chain\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  21675637 → Supersedes 3584139\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n OEM \/ Related Numbers\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  3584139 earlier number superseded by this part\n \u003c\/li\u003e\n \u003cli\u003e\n  3584144 - filter housing\n \u003c\/li\u003e\n \u003cli\u003e\n  3584145 - filter insert\n \u003c\/li\u003e\n \u003cli\u003e\n  3584461 - O-ring\n \u003c\/li\u003e\n \u003cli\u003e\n  21223140 - bracket\n \u003c\/li\u003e\n \u003cli\u003e\n  3586117 - hose clamps\n \u003c\/li\u003e\n \u003cli\u003e\n  994559 - hose clamps\n \u003c\/li\u003e\n \u003cli\u003e\n  961664 - hose clamps\n \u003c\/li\u003e\n \u003cli\u003e\n  21675639 - hose, schematic item 10\n \u003c\/li\u003e\n \u003cli\u003e\n  3849236 - hose assembly\n \u003c\/li\u003e\n \u003cli\u003e\n  3887102 - non-return valve\n \u003c\/li\u003e\n \u003cli\u003e\n  984951 - grommet\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 📦 Condition\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Genuine Volvo Penta part\n \u003c\/li\u003e\n \u003cli\u003e\n  Brand new\n \u003c\/li\u003e\n \u003cli\u003e\n  Supplied in original or equivalent packaging\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔎 Full Model Compatibility\n\u003c\/h2\u003e\n\u003cp\u003e\n Typically suits:\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Volvo Penta D6-330A-F, D6-370A-F, D6-330D-F, D6-370D-F, D6-300A-F, D6-300D-F, D6-300I-F, D6-330I-F, D6-370I-F, D6-400A-E, D6-435D-F, D6-400A-F, D6-435I-F\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta D4-260A-F, D4-260D-F, D4-260I-F, D4-300A-F, D4-300D-F, D4-180I-F, D4-225I-F, D4-300I-F, D4-225A-F\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Volvo Penta","offers":[{"title":"Default Title","offer_id":53381000921380,"sku":"K960404","price":119.56,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8115\/7924\/files\/original_0675deab-b5cb-406e-a142-5bb7fdee9bdf.jpg?v=1777128130","url":"https:\/\/www.sawleysautoandmarine.com.au\/products\/21675637-hose-genuine-volvo-penta","provider":"Sawley's Auto and Marine","version":"1.0","type":"link"}