{"product_id":"21906630-turbocharger-genuine-volvo-penta","title":"21906630 Turbocharger | Genuine Volvo Penta Part","description":"\u003ch2\u003e\n 🔧 Product Description\n\u003c\/h2\u003e\n\u003cp\u003e\n Genuine Volvo Penta turbocharger built to the Holset HE500WG \/ 4031291H specification for TAD1351VE-TAD1353VE engines. Compressor, turbine and wastegate calibration are engine-rating specific and must match the complete turbo identification.\n\u003c\/p\u003e\n\u003ch2\u003e\n 🚤 Compatibility\n\u003c\/h2\u003e\n\u003cp\u003e\n Typically suits:\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Volvo Penta TAD1371-75VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1351-53VE\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Engine Family:\n  \u003c\/strong\u003e\n  TAD\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n ⚙️ Key Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Engine-specific compressor and turbine match\n \u003c\/li\u003e\n \u003cli\u003e\n  Calibrated wastegate \/ actuator where fitted\n \u003c\/li\u003e\n \u003cli\u003e\n  Oil-lubricated high-speed bearing system\n \u003c\/li\u003e\n \u003cli\u003e\n  Factory flange and housing orientation\n \u003c\/li\u003e\n \u003cli\u003e\n  Intake, exhaust and lubrication systems must be verified\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔌 Function\n\u003c\/h2\u003e\n\u003cp\u003e\n Uses exhaust energy to compress intake air, increasing air mass, torque and engine power while the wastegate controls maximum boost.\n\u003c\/p\u003e\n\u003ch2\u003e\n ⚠️ Common Signs of Failure\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Low boost, slow acceleration or power loss\n \u003c\/li\u003e\n \u003cli\u003e\n  Blue\/black smoke or increased oil consumption\n \u003c\/li\u003e\n \u003cli\u003e\n  Siren, scraping or bearing noise\n \u003c\/li\u003e\n \u003cli\u003e\n  Oil leakage into intake or exhaust\n \u003c\/li\u003e\n \u003cli\u003e\n  Wastegate seizure, actuator fault or over\/underboost\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🛠️ Service Notes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Find and fix the cause before fitting a replacement — a restricted air intake, a dirty or partly blocked oil feed, a poor oil drain or debris loose in the exhaust will destroy the new turbocharger as quickly as it did the old one\n \u003c\/li\u003e\n \u003cli\u003e\n  Renew or thoroughly flush the oil feed and drain lines, fit new sealing washers and gaskets, and change the engine oil and filter at the same time\n \u003c\/li\u003e\n \u003cli\u003e\n  Prime the bearing housing with clean engine oil through the feed connection while turning the compressor wheel by hand, before the feed pipe is connected\n \u003c\/li\u003e\n \u003cli\u003e\n  Check both wheels spin freely without touching their housings, and that the inlet and exhaust joints are clean and true so nothing can be drawn or blown through\n \u003c\/li\u003e\n \u003cli\u003e\n  After starting, let the engine idle so oil reaches the bearings before any load is applied, and idle it again to cool the bearings before shutting down after a hard run\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔄 Supersession \u0026amp; Cross Reference\n\u003c\/h2\u003e\n\u003ch3\u003e\n OEM \/ Related Numbers\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  4031291H - Holset manufacturer numbers\n \u003c\/li\u003e\n \u003cli\u003e\n  5329248 - Holset\/Cummins reference\n \u003c\/li\u003e\n \u003cli\u003e\n  3785793 - manufacturer reference\n \u003c\/li\u003e\n \u003cli\u003e\n  5322493 - manufacturer reference\n \u003c\/li\u003e\n \u003cli\u003e\n  3790860 - manufacturer reference\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n Other-Brand OEM Numbers\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Holset \/ Cummins Turbo Technologies HE500WG\n \u003c\/li\u003e\n \u003cli\u003e\n  Holset 4031291H \/ 4031291\n \u003c\/li\u003e\n \u003cli\u003e\n  Holset 5329248 \/ 3785793 \/ 5322493 \/ 3790860 - cross-reference numbers; actuator and calibration must match\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 📦 Condition\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Genuine Volvo Penta part\n \u003c\/li\u003e\n \u003cli\u003e\n  Brand new\n \u003c\/li\u003e\n \u003cli\u003e\n  Supplied in original or equivalent packaging\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Volvo Penta","offers":[{"title":"Default Title","offer_id":53381813960996,"sku":"811714R","price":6176.84,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8115\/7924\/files\/original_317adbe0-3268-45a2-a918-348f5efbc3e7.jpg?v=1777133265","url":"https:\/\/www.sawleysautoandmarine.com.au\/products\/21906630-turbocharger-genuine-volvo-penta","provider":"Sawley's Auto and Marine","version":"1.0","type":"link"}