{"product_id":"22394160-bracket-genuine-volvo-penta","title":"22394160 Bracket | Genuine Volvo Penta Part","description":"\u003ch2\u003e\n 🔧 Product Description\n\u003c\/h2\u003e\n\u003cp\u003e\n This genuine Volvo Penta turbocharger control-system bracket is used in the following application: Volvo Penta TAD1170VE-TAD1172VE turbocharger control systems. Supports the turbocharger control sensor\/pipework so connections remain aligned, strain-free and clear of hot or moving components.\n\u003c\/p\u003e\n\u003ch2\u003e\n 🚤 Compatibility\n\u003c\/h2\u003e\n\u003cp\u003e\n Typically suits:\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Volvo Penta TAD1371-75VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD1170-72VE\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta TAD870-73VE\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Engine Family:\n  \u003c\/strong\u003e\n  TAD\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n ⚙️ Key Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Turbo-system support bracket\n \u003c\/li\u003e\n \u003cli\u003e\n  Correct stand-off and hole pattern\n \u003c\/li\u003e\n \u003cli\u003e\n  Supports pipes or sensors in a high-vibration heat zone\n \u003c\/li\u003e\n \u003cli\u003e\n  Maintains clearance from the exhaust system\n \u003c\/li\u003e\n \u003cli\u003e\n  Bracket only; sensor, pipes and fasteners are separate\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔌 Function\n\u003c\/h2\u003e\n\u003cp\u003e\n Supports the turbocharger control sensor\/pipework so connections remain aligned, strain-free and clear of hot or moving components.\n\u003c\/p\u003e\n\u003ch2\u003e\n ⚠️ Common Signs of Failure\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Loose sensor or control pipe\n \u003c\/li\u003e\n \u003cli\u003e\n  Pipe fatigue at a union due to poor support\n \u003c\/li\u003e\n \u003cli\u003e\n  Chafing or contact with turbocharger components\n \u003c\/li\u003e\n \u003cli\u003e\n  Elongated holes or missing spacer\n \u003c\/li\u003e\n \u003cli\u003e\n  Intermittent boost-control fault caused by vibration\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🛠️ Service Notes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Offer the bracket up and start every fastener by hand before tightening any of them, so the component is not pulled into a strained position\n \u003c\/li\u003e\n \u003cli\u003e\n  Check the mating faces are clean, flat and free of corrosion scale — a bracket that does not sit flat will work loose and let the component move\n \u003c\/li\u003e\n \u003cli\u003e\n  Renew self-locking nuts, lock washers, tab washers or thread-locking compound wherever the original assembly used them, and tighten to the figure given in the workshop manual for your engine\n \u003c\/li\u003e\n \u003cli\u003e\n  Where the bracket carries a rubber mount or bush, renew that at the same time rather than reusing a perished one\n \u003c\/li\u003e\n \u003cli\u003e\n  On brackets in the inlet and exhaust area, never force alignment to make the holes line up — cure the misalignment at its source, or the bracket and the component it holds will both crack\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔄 Supersession \u0026amp; Cross Reference\n\u003c\/h2\u003e\n\u003ch3\u003e\n OEM Supersession Chain\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  22394160 → Supersedes 22058127\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n OEM \/ Related Numbers\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  22058127 earlier number superseded by this part\n \u003c\/li\u003e\n \u003cli\u003e\n  22219276 - associated turbocharger-control sensor\n \u003c\/li\u003e\n \u003cli\u003e\n  22394149 - associated low-mounted control pipe set\n \u003c\/li\u003e\n \u003cli\u003e\n  22394152 - associated high-mounted control pipe set\n \u003c\/li\u003e\n \u003cli\u003e\n  847239 - associated spacer\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 📦 Condition\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Genuine Volvo Penta part\n \u003c\/li\u003e\n \u003cli\u003e\n  Brand new\n \u003c\/li\u003e\n \u003cli\u003e\n  Supplied in original or equivalent packaging\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Volvo Penta","offers":[{"title":"Default Title","offer_id":53385833414948,"sku":"1280640","price":88.89,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8115\/7924\/files\/original_b12d2b3b-aa9a-4b6b-b85d-2343296f2a66.jpg?v=1788062141","url":"https:\/\/www.sawleysautoandmarine.com.au\/products\/22394160-bracket-genuine-volvo-penta","provider":"Sawley's Auto and Marine","version":"1.0","type":"link"}