{"product_id":"22410366-engine-bracket-kit-genuine-volvo-penta","title":"22410366 Engine Bracket Kit | Genuine Volvo Penta Part","description":"\u003ch2\u003e\n 🔧 Product Description\n\u003c\/h2\u003e\n\u003cp\u003e\n D1\/D2 repowering kit for replacing an MD5 with a D1-13, D1-20 or D1-30 in a saildrive installation, weighing 7.65 kg. The kit holds the set of components specific to that one engine swap - brackets, screws, nuts and an installation instruction - and the brackets are shaped to match the new engine to the existing engine bed so the fibreglass work is kept to a minimum. It is the MD5 entry in the saildrive repowering table; the MD6, MD7, MD11 and MD17 swap uses 22410368 instead.\n\u003c\/p\u003e\n\u003ch2\u003e\n 🚤 Compatibility\n\u003c\/h2\u003e\n\u003cp\u003e\n Typically suits:\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Volvo Penta D1-30\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta D1-30B\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta D1-30F\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta D1-13B\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta D1-13F\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta D1-20\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta D1-20B\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta D1-20F\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Engine Family:\n  \u003c\/strong\u003e\n  D\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   HP Range:\n  \u003c\/strong\u003e\n  13-30 HP\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Year Range:\n  \u003c\/strong\u003e\n  Original installations from approximately the 1970s-2000s; replacement D1\/D2 engine generation from the 2000s onward\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n ⚙️ Key Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Replaces an MD5 with a D1-13, D1-20 or D1-30\n \u003c\/li\u003e\n \u003cli\u003e\n  For saildrive installations\n \u003c\/li\u003e\n \u003cli\u003e\n  7.65 kg\n \u003c\/li\u003e\n \u003cli\u003e\n  Brackets, screws, nuts and installation instruction\n \u003c\/li\u003e\n \u003cli\u003e\n  The MD6, MD7, MD11 and MD17 kit is 22410368\n \u003c\/li\u003e\n \u003cli\u003e\n  Matched to one specific engine replacement\n \u003c\/li\u003e\n \u003cli\u003e\n  Brackets shaped to the existing engine bed, so fibreglass work is kept to a minimum\n \u003c\/li\u003e\n \u003cli\u003e\n  Installation gives low vibration and quiet operation\n \u003c\/li\u003e\n \u003cli\u003e\n  Current engine: MD5\n \u003c\/li\u003e\n \u003cli\u003e\n  Installation: Saildrive\n \u003c\/li\u003e\n \u003cli\u003e\n  New engine: D1-13\/20\/30\n \u003c\/li\u003e\n \u003cli\u003e\n  Fits: Repowering a saildrive installation from MD5 to D1-13\/20\/30\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 📋 Kit Contents\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Repower engine bracket - part number 22410164 - quantity 1\n \u003c\/li\u003e\n \u003cli\u003e\n  Flange screw - part number 984735 - quantity as supplied in the Volvo kit\n \u003c\/li\u003e\n \u003cli\u003e\n  Flange screw - part number 984753 - quantity as supplied in the Volvo kit\n \u003c\/li\u003e\n \u003cli\u003e\n  Flange nut - part number 990941 - quantity as supplied in the Volvo kit\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔌 Function\n\u003c\/h2\u003e\n\u003cp\u003e\n Adapts the new D1 engine's mounting points to the bed the old MD5 sat on, so the engine can be set at the right height and alignment without rebuilding the bed.\n\u003c\/p\u003e\n\u003ch2\u003e\n ⚠️ Common Signs of Failure\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  New engine's feet landing nowhere near the old bed's bolt pattern\n \u003c\/li\u003e\n \u003cli\u003e\n  Engine cannot be aligned to the drive within the range of the flexible mounts\n \u003c\/li\u003e\n \u003cli\u003e\n  Bracket faces or mounting holes damaged or corroded on an earlier conversion\n \u003c\/li\u003e\n \u003cli\u003e\n  Vibration and noise after a conversion put together from mixed hardware\n \u003c\/li\u003e\n \u003cli\u003e\n  Fasteners from two different kits mixed, so the clamping load is wrong\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🛠️ Service Notes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  The saildrive itself has to be replaced on this conversion, unless the boat has a 120S saildrive being repowered to D1-13, D1-20 or D1-30, in which case kit 22567193 lets the 120S stay\n \u003c\/li\u003e\n \u003cli\u003e\n  Confirm the old engine, the new engine and the bed dimensions before ordering - each kit is specific to one swap\n \u003c\/li\u003e\n \u003cli\u003e\n  Flexible mounts, coupling parts and alignment shims are separate unless the kit lists them\n \u003c\/li\u003e\n \u003cli\u003e\n  For these installations the existing saildrive needs to be replaced, except for the 120S saildrive when repowering to D1-13\/20\/30, where kit 22567193 lets the 120S be kept\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 📦 Condition\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Genuine Volvo Penta part\n \u003c\/li\u003e\n \u003cli\u003e\n  Brand new\n \u003c\/li\u003e\n \u003cli\u003e\n  Supplied in original or equivalent packaging\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Volvo Penta","offers":[{"title":"Default Title","offer_id":53381085888804,"sku":"8535267","price":437.65,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8115\/7924\/files\/original_0c5f5150-c37d-4f45-ada5-e8971a9cee4c.jpg?v=1788063052","url":"https:\/\/www.sawleysautoandmarine.com.au\/products\/22410366-engine-bracket-kit-genuine-volvo-penta","provider":"Sawley's Auto and Marine","version":"1.0","type":"link"}