{"product_id":"22410368-engine-bracket-kit-genuine-volvo-penta","title":"22410368 Engine Bracket Kit | Genuine Volvo Penta Part","description":"\u003ch2\u003e\n 🔧 Product Description\n\u003c\/h2\u003e\n\u003cp\u003e\n D1\/D2 repowering kit for replacing an MD6, MD7, MD11 or MD17 with a D1-13, D1-20 or D1-30 in a saildrive installation, weighing 14.492 kg and also listed for the D2-40 range. It is the kit the accessories catalogue uses to illustrate what a D1\/D2 repowering kit contains - brackets, screws, nuts and an installation instruction, cut for one specific engine swap. The brackets match the new engine to the existing bed so the conversion needs the least possible fibreglass work and the installation stays quiet and low in vibration.\n\u003c\/p\u003e\n\u003ch2\u003e\n 🚤 Compatibility\n\u003c\/h2\u003e\n\u003cp\u003e\n Typically suits:\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Volvo Penta D2-40\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta D2-40B\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta D2-40F\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta D1-30\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta D1-30B\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta D1-30F\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta D1-13B\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta D1-13F\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta D1-20\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta D1-20B\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta D1-20F\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Engine Family:\n  \u003c\/strong\u003e\n  D\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   HP Range:\n  \u003c\/strong\u003e\n  13-40 HP\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Year Range:\n  \u003c\/strong\u003e\n  Original installations from approximately the 1970s-2000s; replacement D1\/D2 engine generation from the 2000s onward\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n ⚙️ Key Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Replaces an MD6, MD7, MD11 or MD17 with a D1-13, D1-20 or D1-30\n \u003c\/li\u003e\n \u003cli\u003e\n  For saildrive installations\n \u003c\/li\u003e\n \u003cli\u003e\n  14.492 kg\n \u003c\/li\u003e\n \u003cli\u003e\n  Brackets, screws, nuts and installation instruction\n \u003c\/li\u003e\n \u003cli\u003e\n  Also listed for the D2-40, D2-40B and D2-40F\n \u003c\/li\u003e\n \u003cli\u003e\n  Matched to one specific engine replacement\n \u003c\/li\u003e\n \u003cli\u003e\n  Brackets shaped to the existing engine bed, so fibreglass work is kept to a minimum\n \u003c\/li\u003e\n \u003cli\u003e\n  Installation gives low vibration and quiet operation\n \u003c\/li\u003e\n \u003cli\u003e\n  Current engine: MD6\/7\/11\/17\n \u003c\/li\u003e\n \u003cli\u003e\n  Installation: Saildrive\n \u003c\/li\u003e\n \u003cli\u003e\n  New engine: D1-13\/20\/30\n \u003c\/li\u003e\n \u003cli\u003e\n  Fits: Repowering a saildrive installation from MD6\/7\/11\/17 to D1-13\/20\/30\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 📋 Kit Contents\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Repower engine bracket - part number 22410165 - quantity 1\n \u003c\/li\u003e\n \u003cli\u003e\n  Repower engine bracket - part number 22410166 - quantity 1\n \u003c\/li\u003e\n \u003cli\u003e\n  Flange screw - part number 984753 - quantity as supplied\n \u003c\/li\u003e\n \u003cli\u003e\n  Flange nut - part number 990941 - quantity as supplied\n \u003c\/li\u003e\n \u003cli\u003e\n  Stud - part number 953000 - quantity as supplied\n \u003c\/li\u003e\n \u003cli\u003e\n  Flange screw - part number 984735 - quantity as supplied\n \u003c\/li\u003e\n \u003cli\u003e\n  Spacer nut - part number 21264221 - quantity as supplied\n \u003c\/li\u003e\n \u003cli\u003e\n  Stud - part number 953047 - quantity as supplied\n \u003c\/li\u003e\n \u003cli\u003e\n  Flange nut - part number 990940 - quantity as supplied\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔌 Function\n\u003c\/h2\u003e\n\u003cp\u003e\n Adapts the new engine's mounting points to the bed the old MD6, MD7, MD11 or MD17 sat on, so the engine can be set at the right height and alignment without rebuilding the bed.\n\u003c\/p\u003e\n\u003ch2\u003e\n ⚠️ Common Signs of Failure\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  New engine's feet landing nowhere near the old bed's bolt pattern\n \u003c\/li\u003e\n \u003cli\u003e\n  Engine cannot be aligned to the drive within the range of the flexible mounts\n \u003c\/li\u003e\n \u003cli\u003e\n  Bracket faces or mounting holes damaged or corroded on an earlier conversion\n \u003c\/li\u003e\n \u003cli\u003e\n  Vibration and noise after a conversion put together from mixed hardware\n \u003c\/li\u003e\n \u003cli\u003e\n  Fasteners from two different kits mixed, so the clamping load is wrong\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🛠️ Service Notes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  The saildrive itself has to be replaced on this conversion, unless the boat has a 120S saildrive being repowered to D1-13, D1-20 or D1-30, in which case kit 22567193 lets the 120S stay\n \u003c\/li\u003e\n \u003cli\u003e\n  The equivalent gearbox conversions are handled by different numbers - 22567201 for the MD6A-B and MD7A-B, and 22567203 for the MD11C-D\n \u003c\/li\u003e\n \u003cli\u003e\n  Final alignment must follow the Volvo Penta installation instruction supplied with the kit\n \u003c\/li\u003e\n \u003cli\u003e\n  For these installations the existing saildrive needs to be replaced, except for the 120S saildrive when repowering to D1-13\/20\/30, where kit 22567193 lets the 120S be kept\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 📦 Condition\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Genuine Volvo Penta part\n \u003c\/li\u003e\n \u003cli\u003e\n  Brand new\n \u003c\/li\u003e\n \u003cli\u003e\n  Supplied in original or equivalent packaging\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Volvo Penta","offers":[{"title":"Default Title","offer_id":53379586556196,"sku":"N585906","price":492.89,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8115\/7924\/files\/original_470d7bc1-a073-4eeb-8bc0-490a19aa7aa5.jpg?v=1788062786","url":"https:\/\/www.sawleysautoandmarine.com.au\/products\/22410368-engine-bracket-kit-genuine-volvo-penta","provider":"Sawley's Auto and Marine","version":"1.0","type":"link"}