{"product_id":"22410380-engine-bracket-kit-genuine-volvo-penta","title":"22410380 Engine Bracket Kit | Genuine Volvo Penta Part","description":"\u003ch2\u003e\n 🔧 Product Description\n\u003c\/h2\u003e\n\u003cp\u003e\n D1\/D2 repowering kit for replacing an MD2020 or MD2030 in a saildrive installation, weighing 4.128 kg and listed for the D2-40, D2-40B and D2-40F. The MD2010, MD2020 and MD2030 need no kit at all when the new engine is a D1-13, D1-20 or D1-30, so this number is specifically the route to the larger D2-40. The kit holds the brackets, screws, nuts and installation instruction for the swap.\n\u003c\/p\u003e\n\u003ch2\u003e\n 🚤 Compatibility\n\u003c\/h2\u003e\n\u003cp\u003e\n Typically suits:\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Volvo Penta D2-40\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta D2-40B\n \u003c\/li\u003e\n \u003cli\u003e\n  Volvo Penta D2-40F\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Engine Family:\n  \u003c\/strong\u003e\n  D\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   HP Range:\n  \u003c\/strong\u003e\n  40 HP\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Year Range:\n  \u003c\/strong\u003e\n  Original installations from approximately the 1970s-2000s; replacement D1\/D2 engine generation from the 2000s onward\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n ⚙️ Key Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Replaces an MD2020 or MD2030\n \u003c\/li\u003e\n \u003cli\u003e\n  Listed for the D2-40, D2-40B and D2-40F\n \u003c\/li\u003e\n \u003cli\u003e\n  For saildrive installations\n \u003c\/li\u003e\n \u003cli\u003e\n  4.128 kg\n \u003c\/li\u003e\n \u003cli\u003e\n  The MD2040 kit is 22410382\n \u003c\/li\u003e\n \u003cli\u003e\n  Matched to one specific engine replacement\n \u003c\/li\u003e\n \u003cli\u003e\n  Brackets shaped to the existing engine bed, so fibreglass work is kept to a minimum\n \u003c\/li\u003e\n \u003cli\u003e\n  Installation gives low vibration and quiet operation\n \u003c\/li\u003e\n \u003cli\u003e\n  Current engine: MD2020\/30\n \u003c\/li\u003e\n \u003cli\u003e\n  Installation: Saildrive\n \u003c\/li\u003e\n \u003cli\u003e\n  Fits: Repowering a saildrive installation from MD2020\/30\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 📋 Kit Contents\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Repower engine bracket - part number 22410173 - quantity 1\n \u003c\/li\u003e\n \u003cli\u003e\n  Repower engine bracket - part number 22567195 - quantity 1\n \u003c\/li\u003e\n \u003cli\u003e\n  Flange screw - part number 984753 - quantity as supplied\n \u003c\/li\u003e\n \u003cli\u003e\n  Flange nut - part number 990941 - quantity as supplied\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🔌 Function\n\u003c\/h2\u003e\n\u003cp\u003e\n Adapts the new D2-40's mounting points to the bed the old MD2020 or MD2030 sat on, so the engine can be set at the right height and alignment.\n\u003c\/p\u003e\n\u003ch2\u003e\n ⚠️ Common Signs of Failure\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  New engine's feet landing nowhere near the old bed's bolt pattern\n \u003c\/li\u003e\n \u003cli\u003e\n  Engine cannot be aligned to the drive within the range of the flexible mounts\n \u003c\/li\u003e\n \u003cli\u003e\n  Bracket faces or mounting holes damaged or corroded on an earlier conversion\n \u003c\/li\u003e\n \u003cli\u003e\n  Vibration and noise after a conversion put together from mixed hardware\n \u003c\/li\u003e\n \u003cli\u003e\n  Fasteners from two different kits mixed, so the clamping load is wrong\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 🛠️ Service Notes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  No kit is needed if an MD2010, MD2020 or MD2030 is being replaced by a D1-13, D1-20 or D1-30 - this kit is for the step up to the D2-40\n \u003c\/li\u003e\n \u003cli\u003e\n  The existing saildrive has to be replaced on this conversion, unless it is a 120S being repowered to D1-13, D1-20 or D1-30, where kit 22567193 lets the 120S stay\n \u003c\/li\u003e\n \u003cli\u003e\n  For these installations the existing saildrive needs to be replaced, except for the 120S saildrive when repowering to D1-13\/20\/30, where kit 22567193 lets the 120S be kept\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n 📦 Condition\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Genuine Volvo Penta part\n \u003c\/li\u003e\n \u003cli\u003e\n  Brand new\n \u003c\/li\u003e\n \u003cli\u003e\n  Supplied in original or equivalent packaging\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Volvo Penta","offers":[{"title":"Default Title","offer_id":53385696641316,"sku":"R481691","price":492.89,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8115\/7924\/files\/original_7fc478d0-0972-4f6d-ad4c-c7e53fe7511c.jpg?v=1788065096","url":"https:\/\/www.sawleysautoandmarine.com.au\/products\/22410380-engine-bracket-kit-genuine-volvo-penta","provider":"Sawley's Auto and Marine","version":"1.0","type":"link"}