1710 Dunbier Oil Seal Standard | Marine Trailer Part

🔧 Product Description

Dunbier Standard LM Hub Oil Seal - Part Number: 1710

A replacement single-piece hub oil seal for Dunbier LM hubs using LM67048/LM67010 and LM11949/LM11910 bearings. The elastomer sealing lip runs on the axle seal journal while the outer shell is pressed into the hub, retaining bearing grease and limiting entry of water and road contamination.

⚙️ Key Features

• Single-piece grease/oil seal

• Designed for trailer wheel-hub service

• Retains wheel-bearing lubricant

• Helps exclude water, dust and grit

• Replacement should accompany bearing or hub overhaul when the old seal is disturbed

📏 Specifications

• Used with 39mm round and 40mm square LM axle families

• Seal type: Press-fit single-piece radial lip seal

• Material and lip profile follow the supplied Dunbier specification

• Hub and spindle sealing surfaces must be smooth and correctly sized

🔄 Cross Reference & Related Parts

• Dunbier: 1710

• Included in Dunbier 1690B and 1690S bearing kits

• Two-part marine alternative: Dunbier 1715 or 1715S

🚤 Trailer Compatibility & Application

• Suits Dunbier LM hubs using LM67048/LM67010 and LM11949/LM11910 bearings

• Confirm existing seal dimensions and axle family before installation

• A conventional seal is not interchangeable with a two-part marine seal unless the hub and spindle are designed for the alternate system

🔌 Function

Forms the grease barrier between the rotating hub and stationary spindle.

Common signs of wear or replacement:

• Grease leakage onto the rear of the hub or rotor

• Water-contaminated or milky grease

• Hardened, cracked or torn sealing lip

• Groove or rust on the spindle seal journal

• Seal is distorted during hub removal

🛠️ Installation & Safety

• Always replace a removed or damaged seal

• Press squarely using a driver that contacts the outer shell

• Lubricate the sealing lip before installing the hub

• Do not hammer directly on the lip or spring

• Check spindle journal condition before reassembly

📦 Condition

• Genuine Dunbier Marine Products trailer component

• Brand new

• Supplied as one replacement hub oil seal

• Supplied in original or equivalent packaging