20547358 Solenoid | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta Solenoid - Part Number: 20547358

This genuine Volvo Penta solenoid is an OEM service component used in the 12-Volt Energised-to-Stop Fuel-Control Solenoid. It is manufactured to the original Volvo Penta dimensional, material and interface requirements for the documented Volvo Penta D5A/D7A/D7C industrial diesel application. Technical identification: 12 V stop solenoid energised to move the fuel-control linkage to the stop position; 24 V equivalent installation uses Volvo 20532245. In service, it converts an electrical command into controlled mechanical movement to operate the fuel-stop, starting or auxiliary function. Selection must be confirmed by OEM part number 20547358, the exact model/product number, serial number and installed assembly configuration.

⚙️ Key Features

• Genuine Volvo Penta OEM solenoid

• OEM part number 20547358

• Documented application: 12-Volt Energised-to-Stop Fuel-Control Solenoid

• Validated engine/application family: Volvo Penta D5A/D7A/D7C industrial diesel

• Technical distinction: 12 V stop solenoid energised to move the fuel-control linkage to the stop position; 24 V equivalent installation uses Volvo 20532245

• Primary function: Converts an electrical command into controlled mechanical movement to operate the fuel-stop, starting or auxiliary function.

• Confirm system voltage and stroke direction, inspect linkage freedom and connector condition, then verify positive actuation through repeated start/stop cycles.

🔄 Supersession & Cross Reference

OEM Supersession Chain:

• 20547358 (current/original OEM service reference)

OEM / Related Numbers:

• 20547358

Matched Service / Assembly Components:

• 3587675 rubber bellows

• 3836012 bracket

• 20464446 stop plate

• 20464445 ball joint

• 20532245 24 V configuration alternative

Aftermarket / Verified Equivalents:

• No aftermarket equivalent

🚤 Compatibility

Commonly used on:

• 12-Volt Energised-to-Stop Fuel-Control Solenoid

Typically suits:

• Engine / product models:

• D5A-T-A

• D5A-TA-A

• D7A-T-A

• D7A-TA-A

• D7C-TA-A

• Engine / Application Family: Volvo Penta D5A/D7A/D7C industrial diesel

• Serial / Configuration Note: Confirm 12 V system voltage, energised-to-stop logic, stroke direction, bracket/linkage and engine serial number.

🔌 Function

Converts an electrical command into controlled mechanical movement to operate the fuel-stop, starting or auxiliary function. Confirm system voltage and stroke direction, inspect linkage freedom and connector condition, then verify positive actuation through repeated start/stop cycles.

Common signs of failure:

• No movement or incomplete stroke when energised

• Intermittent start, stop or control operation

• Open/short circuit coil, excessive current draw or blown fuse

• Engine fails to start, fails to stop or loses the associated function

• Burnt connector, sticking plunger or linkage binding

📦 Condition

• Genuine Volvo Penta part

• Brand new

• Supplied in original or equivalent packaging