22194880 Sealing Ring | Genuine Volvo Penta Part

🔧 Product Description

Oil-resistant sealing ring used in a Volvo Penta lubrication-system pipe, oil-strainer or pump joint. The ring provides the correct compression and material compatibility for hot engine oil.

🚤 Compatibility

• Engine Family: D, TAD, TWD

Full model list at the end of this description.

⚙️ Key Features

• Oil- and heat-resistant elastomer
• Precision cross-section for the specified groove
• Maintains sealing under pressure and vibration
• Designed for the associated pipe/housing finish
• Replace whenever the joint is disturbed
• Quantity varies by assembly, most commonly one

🔌 Function

Seals the lubricating-oil connection against pressure loss, air entry and external leakage.

⚠️ Common Signs of Failure

• Oil seepage at the joint
• Flattened, cut or hardened seal
• Low oil pressure from suction-side air entry
• Seal extrusion from incorrect size
• Repeated leakage caused by damaged groove or mating surface

🛠️ Service Notes

• Always fit a new sealing ring rather than reusing the old one — a ring that has been compressed once has taken a set and will not seal reliably a second time
• Clean the groove or seat and check it for scoring, corrosion and old sealant before fitting; a mark across the sealing face will leak however good the ring is
• Ease the ring into place without stretching, twisting or dragging it over sharp edges or threads, and check it is seated squarely all the way round before closing the joint
• Do not add sealant or jointing compound unless the workshop manual for your engine calls for it, and tighten the joint or union to the figure given in that manual
• Check the joint for weeping once the engine has been run up to temperature and allowed to cool, as many sealing rings only show a leak after a heat cycle

🔄 Supersession & Cross Reference

OEM Supersession Chain

• 22194880 → Supersedes 21780371

OEM / Related Numbers

• 21780371 earlier number superseded by this part
• 21780376 - related sealing-ring references in adjacent oil-system generations
• 21940610 - related sealing-ring references in adjacent oil-system generations

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta D13C3-B MH, D13C1-B MH, D13C4-B MH, D13B-E MG, D13B-E MG (FE), D13B-E MH, D13B-E MH (FE), D13B-F MG, D13B-F MG (FE), D13B-N MH, D13B-N MH (FE), D13C6-A MP, D13C1-A MH, D13C2-A MH, D13C2-A MG, D13C1-A MG
• Volvo Penta D11C1-A MP, D11C3-A MP, D11C2-A MP, D11C4-A MP, D11B3-A MP, D11B4-A MP, D11A-A, D11A-B, D11A-C, D11A-E, D11B2-A MP, D11A-C MP, D11A-D MP, D11A-C (IPS), D11B1-A MP
• Volvo Penta D16C-A MG, D16C1-E MG, D16C1-F MG, D16C2-E MG, D16C2-F MG, D16C-D MH, D16C1-E MH, D16C1-F MH, D16C2-E MH, D16C2-F MH
• Volvo Penta TAD1341-43GE-B, TAD1341VE, TAD1341GE
• Volvo Penta TAD1344-45GE-B, TAD1344VE, TAD1344GE
• Volvo Penta TAD1342VE, TAD1342GE
• Volvo Penta TAD1343VE, TAD1343GE
• Volvo Penta TAD1345GE, TAD1345VE
• Volvo Penta TAD1350GE, TAD1350VE
• Volvo Penta TAD1351GE, TAD1351-53VE
• Volvo Penta TWD1683GE-B, TWD1683VE
• Volvo Penta TAD1140-42VE
• Volvo Penta TAD1150-52VE
• Volvo Penta TAD1170-72VE
• Volvo Penta TAD1340VE
• Volvo Penta TAD1346GE
• Volvo Penta TAD1352GE
• Volvo Penta TAD1353GE
• Volvo Penta TAD1354GE
• Volvo Penta TAD1355GE
• Volvo Penta TAD1360-62VE
• Volvo Penta TAD1363-65VE
• Volvo Penta TAD1371-75VE
• Volvo Penta TAD1380-82GE
• Volvo Penta TAD1381-85VE
• Volvo Penta TAD1384-85VE-IWP
• Volvo Penta TAD1640-42VE-C
• Volvo Penta TAD1643VE-B
• Volvo Penta TAD1650VE-B/51VE
• Volvo Penta TAD1670-72VE
• Volvo Penta TWD1644-45GE
• Volvo Penta TWD1672-1673GE
• Volvo Penta TWD1682-83GE
• Volvo Penta TWD1744GE