Skip to product information
1 of 1

22338627 Pipe | Genuine Volvo Penta Part

22338627 Pipe | Genuine Volvo Penta Part

Regular price $674.67 AUD
Regular price Sale price $674.67 AUD
Sale Sold out
Shipping calculated at checkout.
Quantity

🔧 Product Description

A genuine rigid high-pressure fuel pipe connecting the common rail to the cylinder 1 injector on the Volvo Penta D8A1-A MP marine engine. The pipe is precision-formed and has matched sealing cones; it must not be bent, re-flared or substituted with a pipe for another cylinder.

🚤 Compatibility

Typically suits:

  • Volvo Penta D8A2-A MP
  • Volvo Penta D8A1-A MP
  • Engine Family: D

⚙️ Key Features

  • Genuine Volvo Penta common-rail injector pipe
  • Cylinder position: No. 1
  • Catalogued for D8A1-A MP
  • Precision-formed for the original rail and injector positions
  • High-pressure sealing cones are position-specific
  • Treat as a critical clean fuel-system component and replace if damaged

🔌 Function

Transfers metered high-pressure fuel from the common rail to the cylinder 1 injector.

⚠️ Common Signs of Failure

  • Fuel leakage or wetness at a union
  • Diesel knock, misfire or cylinder imbalance
  • Rail-pressure fault caused by leakage
  • Cracked pipe from vibration or incorrect support
  • Damaged sealing cone after overtightening
  • External corrosion or rubbing marks

🛠️ Service Notes

  • Offer the pipe up and check it reaches both connections freely before you tighten anything — a rigid pipe pulled into place is a pipe left under permanent strain, and strained pipes crack at the fittings in service
  • Renew the sealing washers, O-rings or union seals that go with the pipe rather than reusing the old ones, and make sure the seats, faces and threads are clean
  • Keep the ends capped while you work and blow or flush a pipe through before fitting; anything left inside goes straight into the oil, fuel or coolant system
  • Tighten unions and banjo bolts evenly to the figures in the workshop manual for your engine — overtightening distorts the seat and starts the leak you were trying to cure
  • Refit every clip and support bracket in its original place and keep the pipe clear of hot or moving parts so it cannot chafe or be shaken to failure

🔄 Supersession & Cross Reference

OEM / Related Numbers

  • 22807245 - Associated common rail
  • 22625707 - Associated injector references
  • 23185947 - Associated injector references
  • 22208205 - Associated high-pressure fuel pump
  • 21880678 - Associated rail pressure sensor
  • 21880675 - Associated pressure-relief valve

OEM Reman Alternatives

  • 3801736 - Associated Volvo Penta reman injector references
  • 3801854 - Associated Volvo Penta reman injector references

📦 Condition

  • Genuine Volvo Penta part
  • Brand new
  • Supplied in original or equivalent packaging
View full details