22437125 Stud | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta stud from the Marine Propulsion group, weighing 0.013 kg and listed for 16 D series applications. The stud provides a fixed threaded projection for a nut, so thread condition at both ends determines the clamping load achievable.

🚤 Compatibility

Typically suits:

• Volvo Penta D2-40F
• Volvo Penta D2-55F
• Volvo Penta D2-50F
• Volvo Penta D2-75F
• Volvo Penta D2-60F
• Volvo Penta D1-30F
• Volvo Penta 130SR-C
• Volvo Penta 130S-C
• Volvo Penta D1-13F
• Volvo Penta D1-20F
• Volvo Penta 130S-D
• Volvo Penta 130SR-D
• Volvo Penta 150S-D
• Volvo Penta 150SR-D
• Volvo Penta 150S-C
• Volvo Penta 150SR-C

• Engine Family: D
• HP Range: 13-75 HP

⚙️ Key Features

• 0.013 kg
• 16 D series applications
• Marine Propulsion group

🔌 Function

Provides a fixed threaded projection for a nut to clamp against, holding a joint together.

⚠️ Common Signs of Failure

• Thread stripped, stretched or picked up
• Stud turning in its tapped hole
• Corrosion or seizure where it passes through
• Nut will not pull up to tension
• Stud snapped off level with the face

🛠️ Service Notes

• Check the tapped hole as well as the stud - a stud that keeps loosening usually means the hole is damaged
• Fit new studs rather than reusing corroded ones, and clean both threads before assembly

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging