22684406 Bracket | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta bracket weighing 1.052 kg, listed for six D series engine applications.

🚤 Compatibility

Typically suits:

• Volvo Penta D13C6-A MP
• Volvo Penta D13C1-A MH
• Volvo Penta D13C2-A MH
• Volvo Penta D13C5-A MP
• Volvo Penta D13C2-A MG
• Volvo Penta D13C1-A MG

• Engine Family: D

⚙️ Key Features

• 1.052 kg
• Six D series engine applications

🔌 Function

Holds its component in a fixed position on the engine.

⚠️ Common Signs of Failure

• Component it carries loose or sitting out of line
• Cracks radiating from the bolt holes or a weld
• Mounting holes elongated by movement
• Fixings working loose, with fretting marks at the joint

🛠️ Service Notes

• Offer the bracket up and start every fastener by hand before tightening any of them, so the component is not pulled into a strained position
• Check the mating faces are clean, flat and free of corrosion scale — a bracket that does not sit flat will work loose and let the component move
• Renew self-locking nuts, lock washers, tab washers or thread-locking compound wherever the original assembly used them, and tighten to the figure given in the workshop manual for your engine
• Where the bracket carries a rubber mount or bush, renew that at the same time rather than reusing a perished one
• On brackets in the inlet and exhaust area, never force alignment to make the holes line up — cure the misalignment at its source, or the bracket and the component it holds will both crack

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging