22896523 Exhaust Pipe Kit | Genuine Volvo Penta Part

🔧 Product Description

A genuine Volvo Penta exhaust-pipe extension package for jackshaft installations requiring an overall connection length between approximately 550mm and 950mm. The formed components maintain the correct exhaust and cooling-water routing between the engine and remote drive installation.

⚙️ Key Features

• Genuine Volvo Penta water-cooled / water-injected exhaust pipe kit
• Correct Volvo Penta part number 22896523
• Factory routing, outlet angle and hose dimensions for the assigned installation
• Marine-grade construction for hot exhaust and seawater exposure
• Engine and installation serial-number confirmation required
• System type: Water-cooled / water-injected marine exhaust

📋 Kit Contents

• 1 × complete adjustable / installation-specific jackshaft exhaust pipe assembly - 22896523
• Matched exhaust connection and sealing components - serviced under kit 22896523
• Specified hose-clamp and support components supplied with the kit where required
• Individual internal pipe sections are installation-controlled and are not published as one universal breakdown

🔌 Function

The assembly carries exhaust gas away from the engine and introduces or conveys cooling water at the specified point so downstream hose temperatures remain within the approved range.

⚠️ Common Signs of Failure

• Water, soot or rust staining around the exhaust joint
• Internal corrosion restricts exhaust flow
• Engine loses power or overheats under load
• Exhaust hose becomes excessively hot
• Seawater flows back toward the engine through a failed or incorrectly installed pipe

🛠️ Service Notes

• Support the pipework on its own mountings and let the flanges meet square before any fastener is tightened; pulling a misaligned joint together with the bolts cracks pipes and warps flanges
• Renew the gaskets and seals supplied and clean the flange faces of old gasket and carbon without scoring them
• Fit all the parts the kit provides rather than mixing new with old, and tighten evenly in the sequence and to the figures in the workshop manual for your engine
• Leave the clearance to hoses, wiring and structure that the installation calls for so the pipework can grow as it heats, and do not clamp a run rigidly at both ends unless it is designed that way
• Run the engine up to temperature, then re-check the joints for leaks and the fasteners for tightness once it has cooled

🔄 Supersession & Cross Reference

OEM Supersession Chain

• 22896523 → Supersedes 3887736 → Supersedes 3842835

OEM / Related Numbers

• 3887736 earlier number superseded by this part
• 3842835 earlier number superseded by this part
• Jackshaft length range 550-950mm

Other-Brand OEM Numbers

• VOE22896523

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging