22925804 Kit | Genuine Volvo Penta Part

🔧 Product Description

A genuine Volvo Penta intake-manifold and electronic-throttle-body service package for the serial-numbered petrol engine that specifies 22925804. The kit renews the matched throttle or airflow-control components without replacing unrelated intake-manifold parts.

🚤 Compatibility

• Engine Family: V
• HP Range: 300-430 HP

Full model list at the end of this description.

⚙️ Key Features

• Genuine Volvo Penta throttle-body service kit
• Correct Volvo Penta part number 22925804
• Catalogued in the intake-manifold and throttle-body system
• Maintains the correct throttle bore, actuator and sealing specification
• Requires throttle adaptation or diagnostic commissioning where specified
• System type: Electronic throttle / air intake

📋 Kit Contents

• 1 × matched electronic throttle-body service assembly - 22925804
• Throttle-body sealing component - serviced within kit 22925804
• Configuration-specific retaining components - serviced within kit 22925804
• External wiring connector, intake manifold and control module are serviced separately unless identified on the supplied package

🔌 Function

The throttle body regulates intake airflow in response to the electronic throttle command, allowing the engine control module to manage speed, load and idle.

⚠️ Common Signs of Failure

• Reduced-power or throttle-actuator fault
• Unstable or excessively high idle
• Throttle plate sticks or does not follow command
• Air leak at the throttle-body seal
• Throttle adaptation cannot be completed

🛠️ Service Notes

• Check the kit contents against the parts list for your engine before you start, and confirm it is the kit specified for your engine's serial number — kit contents change between engine versions
• Lay the contents out and identify every item against the assembly as it comes apart, so nothing is left over at the end
• Use all the new parts supplied and discard the old ones, even where an old item still looks serviceable; the kit is packaged as a complete replacement for what it covers
• While access is open, clean and inspect the mating parts that are not in the kit — new seals, gaskets or wearing parts fitted to a worn housing, shaft or face will not last
• Tighten, set and adjust to the figures given in the workshop manual for your engine, and renew any single-use fasteners or locking devices the kit provides

🔄 Supersession & Cross Reference

Other-Brand OEM Numbers

• VOE22925804

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta V8-350-C-R, V8-350-CE-R, V8-380-C-R, V8-380-CE-R, V8-430-C-R, V8-300-C-M, V8-300-CE-M, V8-350-C-M, V8-350-CE-M, V8-300-C-N, V8-300-CE-N, V8-350-C-N, V8-350-CE-N, V8-380-C-M, V8-380-CE-M, V8-380-CE-J, V8-380-C-J, V8-430-CE-J, V8-430-C-J, V8-350-C-H, V8-350-CE-H, V8-350-C-J, V8-350-CE-J, V8-300-C-R, V8-300-CE-R, V8-430-CE-R, V8-430-C-M, V8-430-CE-M, V8-300-C-K, V8-300-CE-K, V8-350-C-K, V8-350-CE-K, V8-380-C-K, V8-380-CE-K, V8-430-C-K, V8-430-CE-K, V8-300-C-P, V8-300-CE-P, V8-350-C-P, V8-350-CE-P, V8-380-C-P, V8-380-CE-P, V8-430-C-P, V8-300-CE-G, V8-300-C-G, V8-300-C-H, V8-300-CE-H, V8-300-C-J, V8-300-CE-J, V8-350-C-G, V8-350-CE-G, V8-380-C-N, V8-380-CE-N, V8-430-C-N, V8-430-CE-N, V8-430-CE-P, V8-300-C-S, V8-300-CE-S, V8-350-C-S, V8-350-CE-S