1
/
of
1
23083950 Piston Ring Kit | Genuine Volvo Penta Part
23083950 Piston Ring Kit | Genuine Volvo Penta Part
Regular price
$402.44 AUD
Regular price
Sale price
$402.44 AUD
Shipping calculated at checkout.
Quantity
Couldn't load pickup availability
Available on request — contact us
As an authorised Volvo Penta dealer we can source parts through channels not shown online, and check supersession and used options for you
Availability checked daily with Volvo Penta
🔧 Product Description
A genuine 0.5mm oversize piston-ring set for one D4 or D6 piston used with a 101.5mm finished cylinder bore. It is not a standard-bore ring set and must only be installed with the matching oversize machining and piston specification.
🚤 Compatibility
- HP Range: Approximately 180-480 HP
- Year Range: Approximately 2000s-2010s
⚙️ Key Features
- Complete ring set for one piston
- 0.5mm oversize specification
- 101.5mm finished bore
- Used on selected D4 and D6 rebuilds
- Engine type: Volvo Penta D4 or D6 common-rail marine diesel
📋 Kit Contents
- Complete oversize compression and oil-control ring set - Volvo Penta 23083950
🔌 Function
The rings seal combustion pressure, regulate the cylinder-wall oil film and transfer piston heat into the cylinder bore.
⚠️ Common Signs of Failure
- Broken, stuck or worn piston rings
- Engine has been machined to 101.5mm oversize
🛠️ Service Notes
- Check the end gap of each ring in the bore it will run in and compare it with the figure in the workshop manual for your engine; a worn or rebored cylinder changes it
- Fit the rings the right way up — where a face is marked or the section is stepped, that face goes towards the piston crown, and an oil control ring's expander must be fitted without overlapping its own ends
- Use a ring expander rather than levering rings on with a screwdriver, and open them only as far as they need to go; cast rings snap and the groove edges nick easily
- Stagger the ring gaps round the piston as the manual for your engine directs, so that no two gaps line up
- Oil the rings, bore and compressor lightly, enter the bore with a ring compressor, and never force the piston in — if it resists, back it out and find out why
🔄 Supersession & Cross Reference
Aftermarket / Verified Equivalents
- Swedish Lorry Parts PRK-728X
- Aftermarket 101.5mm D4 / D6 ring sets must match ring thickness, profile and piston-groove specification
📦 Condition
- Genuine Volvo Penta part
- Brand new
- Supplied in original or equivalent packaging
Share
